• Journal of Microbiology
• /
• 제45권1호
• /
• pp.79-82
• /
• 2007

The 58 rRNA gene from Sphingobium chungbukense DJ77 was identified. The secondary structure of the 199-base-long RNA was proposed. The two-base-long D loop was the shortest among all of the known 5S rRNAs. The U19-U64 non-canonical pair in the helix II region was uniquely found in strain DJ77 among all of the sphingomonads.

• 한국수산과학회지
• /
• 제47권5호
• /
• pp.545-555
• /
• 2014

To develop Korean-style cut noodles with enhanced protein and calcium levels, we manipulated the ratio of dried anchovy Engraulis japonicus soup base residue powder to wheat flour, using a response surface methodology based on trained panel trials to determine the optimum ratio. Texture analysis and nutritional evaluation were also performed on cut noodles containing dried anchovy soup base residue (CNAR). Higher umami taste and springiness, and lower fishy flavor were strongly correlated with overall acceptability. The optimal CNAR formulation consisted of wheat flour (96.02 g), anchovy residue powder (2.67 g), and water (50.64 mL). CNAR had lower gumminess and adhesiveness (P<0.001), but higher springiness, cohesiveness (P<0.001), and chewiness (P<0.05), than the control (original wheat flour cut noodles). The addition of anchovy soup base residue elevated protein, lipid, and ash levels relative to the control. Color values decreased with increasing residue powder content. In vitro protein and starch digestibility of CNAR were lower than in the control (P<0.001). CNAR yielded significantly higher total free amino acid content than the control (P<0.01), leading to CNAR's improved palatability. Dried anchovy soup base residue can be used in wheat flour cut noodles to improve nutrition, sensory acceptability, and profitability.

• 한국통신학회논문지
• /
• 제30권1A호
• /
• pp.10-27
• /
• 2005

본 논문에서는 다년간에 걸쳐 진행되었던 WCDMA(UMTS) 기지국 모뎀 개발을 위한 상위 레벨 설계 및 설계에 적용된 기저대역 동기 알고리즘에 대한 분석과 고정 소수점 설계를 통한 성능 평가 결과를 제시하였다. 설계 대상 시스템이 기지국임을 고려하여 모뎀을 구성하는 각 동기 모듈은 빠른 추적 성능보다 안정적인 성능을 보장할 수 있도록 설계되었으며, 구현을 위한 고정 소수점 설계시 각 모듈의 내부 연산에 대한 최적의 비트설정을 통하여 복잡도를 최소화하였다. 본 논문에서는 먼저 모뎀 설계를 위하여 개발된 각 기저대역 동기 모듈에 대한 분석을 수행하였으며, 이후 구현을 위하여 고정 소수점 설계된 모뎀과 부호화/다중화를 포함하는 심볼 레벨 프로세싱(Symbol Level Processing; SLP)파의 링크 성능을 제시하였다. 성능 평가는 3GPP TS 25.104(Release 5)에 제시된 12.2kbps, 64kbps, 144kbps, 384kbps의 전송 속도에 대하여 참조 무선 채널 환경을 기반으로 수행되었으며, 규격에 제시된 최소 요구 성능과의 비교를 통하여 약 2dB 이상의 성능 여유(margin)를 갖는 매우 안정적인 동작을 보임을 증명하였다. 본 논문에서 제시된 WCDMA 기지국 모뎀은 기지국 모뎀 칩으로 성공적으로 구현되었다.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.229-239
• /
• 1992

This study was performed to define the adaptation patterns of each skeletal components to the flexures of cranial bases, using 91 males from the ages of 17 to 36 and 64 females from the ages of 16 to 34, without orthodontic or prosthetic treatment experiences and with pleasant profiles as subjects. The conclusions are as follow: 1. When considering the changes of flexure of cranial base (Ba-SE-FMN) in both sexes, changes in the anterior cranial base angle to the PM Vertical line (SE-FMN/PMV) were greater than the changes in the posterior cranial base angle to the PM Vertical line (Ba-SE/PMV). Subsequently the nasomaxillary complex showed antero-superior rotating effect as the cranial base angles were increased and postero-inferior rotating effect as they were decreased. 2. Horizontal mandibular angle (Ba-SE-Me) was increased in both sexes as cranial base angle increases (Ba-SE-FMN) and it decreased as the latter was decreases. There by indicating compensatory effects. 3. Maxillary angle (SE-FMN-A) was decreased in both sexes as cranial base angle (Ba-SE-FMN) increases and it increased as the latter was decreased. There by indicating compensatory effects. 4. Mandibular ramus angle to posterior cranial base was decreased in both sexes as cranial base angle increases. There by indicating compensatory effect to anteriorly displaced maxilla and the mandibular ramus angle was increased as the cranial base angle decreases. There by indicating compensatory effect to posteriorly displace maxilla. 5. The length of posterior upper facial height was decreased in both sexes as the cranial base angle increases and it increased as the latter was decreased.

• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.64-71
• /
• 2007

The dissolution phenomenon of the solid phase powder and base metal by liquid phase insert metal during Transient Liquid Phase bonding using the mixed powder composed of the modified GTD111(base metal) powder and the GNi3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder was investigated. In case of the mixed powder contains modified GTD111 powder 50wt%, all of the powder was melted by liquid phase at 1423K. At the temperature between solidus and liquidus of GNi3, liquid phase penetrated into the boundary of the modified GTD111 powder and solid particle separated from powder was melted easily because area of reaction was increased. With increasing mixing ratio of the modified GTD111, it needed the higher temperature to melt all of the modified GTD111 powder. During Transient Liquid Phase bonding using the mixed powder composed of the modified GTD111 50wt% and GNi3 50wt% as insert metal, width of the bonded interlayer was increased with increasing bonding temperature by reaction of the base metal and liquid phase in insert metal. Dissolution of the base metal and modified powder by liquid phase progressed all together and after all of the powder was melted nearly, the dissolution of the base metal occurred quickly.

• 대한치과기공학회지
• /
• 제36권1호
• /
• pp.1-7
• /
• 2014

Purpose: The aim of this study was analyzed by comparing the effect of glass fiber reinforcement addition on the strength of resin denture base. It was intended to provide a reference data useful for clinical application. Methods: The test specimens (length $64.0{\pm}0.1mm$, width $10.0{\pm}0.1mm$, thickness $1.0{\pm}0.1mm$, $1.5{\pm}0.1mm$, and $2.0{\pm}0.1mm$ respectively) were made. In the experimental groups resin denture base reinforced with glass fiber were fabricated. In the control groups resin denture base were fabricated by conventional method. After specimen fabrication was completed, transverse test was performed using a universal testing machine. Results: The transverse strength value in CON group was $83.08{\pm}9.07MPa$ for 1.0 mm, which ranked the highest in value. On the other hand, the value was $56.07{\pm}5.15MPa$ for 2.0mm, which ranked the lowest in value. And CON+SES group was $119.80{\pm}30.70MPa$ for 1.0mm, which ranked the highest in value. On the other hand, the value was $84.00{\pm}7.97MPa$ for 2.0mm, which ranked the lowest in value. Also, the flexural modulus value in CON group was $2,983.10{\pm}506.92MPa$ for 1.0mm, which ranked the highest in value. On the other hand, the value was $1,257.64{\pm}230.48MPa$ for 2.0mm, which ranked the lowest in value. And CON+SES group was $4,679.41{\pm}1578.29MPa$ for 1.0mm, which ranked the highest in value. On the other hand, the value was $2,512.36{\pm}527.09MPa$ for 2.0mm, which ranked the lowest in value. Conclusion: The reinforced glass fiber increased the strength of resin denture base, effected to reduce the thickness of resin denture base.

• Corrosion Science and Technology
• /
• 제4권2호
• /
• pp.64-68
• /
• 2005

Various metallic materials are coated on Fe base materials via thermal spraying or welding process to improve both corrosion resistance as well as erosion resistance of the Fe base materials used in buildings and special works. The mechanical properties and corrosion resistance of the coat are estimated by means of hardness measurement and anodic polarization test. In additions, the effect of alloying elements and microstructure of the coatings on the mechanical and chemical properties of the coat is investigated using X- ray diffraction, Optical microscope, Transmission electron microscopy and Auger analysis. The coating deposited by tungsten inert gas (TIG) welding exhibit a good combination of hardness and corrosion properties.

• 품질경영학회지
• /
• 제23권1호
• /
• pp.64-73
• /
• 1995

At the time of internationalization, it is inevitable to improve the quality of products to survive the international competition. ISO 9000 series have been recognized by most companies as the quality assurance system. However, it was known to require quite many records and data which need to be controlled and analyzed. The objective of this paper is to present the procedure in establishing the quality information data base which enables a company to easily handle the required records and data for the ISO 9000 series. Examples using the quality information data base are also presented.

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.64-69
• /
• 2003

The bonding phenomena and mechanical property of duplex stainless steel during brazing have been investigated. The UNS32550 was used for base metal, and the MBF50 was used for insert metal. Brazing was carried out under the various conditions (brazing temperature : 1473K, 1498K, holding time : 0∼1.8ks). There were various microconstituents in the bonded interlayer because of reaction between liquid insert metal and base metal. In the early stage of brazing, BN is formed in the bonded interlayer and base metal near the bonded layer. Cr made is formed in the bonded interlayer. The amount of BN and Cr nitrides decrease with the increase of bonding temperature and holding time. Superior shear strength of 550MPa is obtained by restraining the formation of nitrides. (Received January 17, 2003)

• Structural Engineering and Mechanics
• /
• 제41권3호
• /
• pp.365-378
• /
• 2012

In this study, strength reduction factors are investigated for SDOF systems with period range of 0.1-3.0 s with elastoplastic behavior considering soil structure interaction for 64 different earthquake motions recorded on different site conditions such as rock, stiff soil, soft soil and very soft soil. Soil structure interacting systems are modeled and analyzed with effective period, effective damping and effective ductility values differing from fixed-base case. For inelastic time history analyses, Newmark method for step by step time integration was adapted in an in-house computer program. Results are compared with those calculated for fixed-base case. A new equation is proposed for strength reduction factor of interacting system as a function of structural period of system (T), ductility ratio (${\mu}$) and period lengthening ratio (T/T). It is concluded that soil structure interaction reduces the strength reduction factors for soft soils, therefore, using the fixed-base strength reduction factors for interacting systems lead to non-conservative design forces.