Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Dissolution Phenomenon of the Base Metal during TLP Bonding Using the Modified Base Metal Powder and Ni Base Filler Metal Powder

유사 조성의 모재분말과 Ni기 삽입금속 혼합분말을 사용한 천이액상확산 접합 시 모재의 용해현상

  • Published : 2007.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The dissolution phenomenon of the solid phase powder and base metal by liquid phase insert metal during Transient Liquid Phase bonding using the mixed powder composed of the modified GTD111(base metal) powder and the GNi3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder was investigated. In case of the mixed powder contains modified GTD111 powder 50wt%, all of the powder was melted by liquid phase at 1423K. At the temperature between solidus and liquidus of GNi3, liquid phase penetrated into the boundary of the modified GTD111 powder and solid particle separated from powder was melted easily because area of reaction was increased. With increasing mixing ratio of the modified GTD111, it needed the higher temperature to melt all of the modified GTD111 powder. During Transient Liquid Phase bonding using the mixed powder composed of the modified GTD111 50wt% and GNi3 50wt% as insert metal, width of the bonded interlayer was increased with increasing bonding temperature by reaction of the base metal and liquid phase in insert metal. Dissolution of the base metal and modified powder by liquid phase progressed all together and after all of the powder was melted nearly, the dissolution of the base metal occurred quickly.

Keywords

References

  1. J.A.Daleo and J.R.Wilson : Journal of Engineering for Gas Turbine and Power, 120(1998), April, 375 https://doi.org/10.1115/1.2818133
  2. K.B.Gove : Joining Technology, (1989), June, 341
  3. DVS : High Temperature Brazing and Diffusion Bonding, 5th International Conference (1988.6), Achen, 192
  4. K.H. Richter : High Temperature Brazing and Diffusion welding, dvs, 1998, 1
  5. M.H. Haafkens : W.J., 61-11(1982), 25
  6. Nakao : Welding Technique, 35-7(1987), 64
  7. Chung-Yun Kang, In-Bae Kim, Dae-Up Kim, In-Su Woo, Min-Suk Kwon : Journal of KWS, 21-2(2003), 211-218 (in Korea)
  8. Chung-Yun Kang, Hyong-Chol Whang, In-Bae Kim, Dae-Up Kim, In-Su Woo : Journal of KWS, 21-2 (2003), 219-226 (in Korea)
  9. Chung-Yun Kang, Hyong-Chol Whang, In-Bae Kim, Dae-Up Kim, In-Su Woo : Journal of KWS, 21-3 (2003), 334-340
  10. C.H. Ye, B.K. Lee, W.Y. Song, I.S. Oh, C.Y. Kang : Journal of KWS, 23-6(2005), 99-105 (in korea)
  11. C.Y. Kang : Journal of KWS, 7-2(1989), 12-24 (in korea)
  12. E.B.Fernsler : Heat treating, cleaning and finishing, Metals handbook, ASM, vol. 2, 661