• 제목/요약/키워드: Bandwidth Control

검색결과 1,337건 처리시간 0.029초

NJ+: An Efficient Congestion Control Mechanism for Wireless Networks

  • Lee, Jae-Hyung;Kim, Jung-Rae;Park, Min-U;Koo, Ja-Hwan;Choo, Hyun-Seung
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제2권6호
    • /
    • pp.333-351
    • /
    • 2008
  • Transmission control protocols have to overcome common problems in wireless networks. TCP employing both packet loss discrimination mechanism and available bandwidth estimation algorithm, known as the good existing solution, shows significant performance enhancement in wireless networks. For instance, TCP New Jersey which exhibits high throughput in wireless networks intends to improve TCP performance by using available bandwidth estimation and congestion warning. Even though it achieves 17% and 85% improvements in terms of goodput over TCP Westwood and TCP Reno, respectively, we further improve it by exploring maximized available bandwidth estimation, handling bit-error-rate error recovery, and effective adjustment of sending rate for retransmission timeout. Hence, we propose TCP NJ+, showing that for up to 5% packet loss rate, it outperforms other TCP variants by 19% to 104% in terms of goodput when the network is in bi-directional background traffic.

High-Performance Voltage Controller Design Based on Capacitor Current Control Model for Stand-alone Inverters

  • Byen, Byeng-Joo;Choe, Jung-Muk;Choe, Gyu-Ha
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권4호
    • /
    • pp.1635-1645
    • /
    • 2015
  • This study proposes high-performance voltage controller design that employs a capacitor current control model for single-phase stand-alone inverters. The single-phase stand-alone inverter is analyzed via modeling, which is then used to design the controller. A design methodology is proposed to maximize the bandwidth of the feedback controller. Subsequently, to compensate for the problems caused by the bandwidth limitations of the controller, an error transfer function that includes the feedback controller is derived, and the stability of the repetitive control scheme is evaluated using the error transfer function. The digital repetitive controller is then implemented. The simulation and experimental results show that the performance of the proposed controller is high in a 1.5 kW single-phase stand-alone inverter prototype.

Robustness and Actuator Bandwidth of MRP-Based Sliding Mode Control for Spacecraft Attitude Control Problems

  • Keum, Jung-Hoon;Ra, Sung-Woong
    • Journal of Astronomy and Space Sciences
    • /
    • 제26권4호
    • /
    • pp.651-658
    • /
    • 2009
  • Nonlinear sliding surface design in variable structure systems for spacecraft attitude control problems is studied. A robustness analysis is performed for regular form of system, and calculation of actuator bandwidth is presented by reviewing sliding surface dynamics. To achieve non-singular attitude description and minimal parameterization, spacecraft attitude control problems are considered based on modified Rodrigues parameters (MRP). It is shown that the derived controller ensures the sliding motion in pre-determined region irrespective of unmodeled effects and disturbances.

ATM Rate Based Traffic Control with Bode Principle

  • Jing, Yuanwei;Zeng, Hui;Jing, Qingshen;Yuan, Ping
    • International Journal of Control, Automation, and Systems
    • /
    • 제6권2호
    • /
    • pp.214-222
    • /
    • 2008
  • Bode principle is applied to carry out traffic control for rate based ATM network, which guarantees the higher buffer utilization, buffer overflow-free, and well utilization of bandwidth. The principle confirms the relationship between the threshold of buffer queue and the network bandwidth, as well as the relationship between the threshold of buffer and source input rate. Theoretic warrant of the buffer threshold is proposed. The reference range of source input rate is provided in theory, which makes the source end respond to the change of network state rapidly and dynamically, and then the effect of time delay to the traffic control is avoided. Simulation results show that the better steady and dynamic performances of networks are obtained by Bode principle.

슬라이딩 모우드를 이용한 유도전동기의 위치제어에 관한 연구 (A Study on Position Control of Induction Motor Using the Sliding Mode)

  • 박민호;김경서;이홍희
    • 대한전기학회논문지
    • /
    • 제39권1호
    • /
    • pp.49-56
    • /
    • 1990
  • An induction motor position control system based on the sliding mode control is presented. In the sliding mode control, control function is discontinuous on the hyperplane, which causes harmful effects such a s current harmonics and acoustic noise in the motor drive application. In this study, a low pass filter is introduced between the sliding mode controller output and the motor controller input to reduce these effects. The filter, however, makes the torque response slggish and the system performance may become poor in cost of chattering reduction. To overcome these problems, the bandwidth of the filer is varied according to the error function. It is shown that the proposed sliding mode control with variable-bandwidth filter shows good performance, which is confirmed through experiments.

  • PDF

Carrier Tracking Loop using the Adaptive Two-Stage Kalman Filter for High Dynamic Situations

  • Kim, Kwang-Hoon;Jee, Gyu-In;Song, Jong-Hwa
    • International Journal of Control, Automation, and Systems
    • /
    • 제6권6호
    • /
    • pp.948-953
    • /
    • 2008
  • In high dynamic situations, the GPS carrier tracking loop requires a wide bandwidth to track a carrier signal because the Doppler frequency changes more rapidly with time. However, a wide bandwidth allows noises within the bandwidth of the tracking loop to pass through the loop filter. As these noises are used in the numerical controlled oscillator(NCO), the carrier tracking loop of a GPS receiver shows a degraded performance in high dynamic situations. To solve this problem, an adaptive two-stage Kalman filter, which offers the NCO a less noisy phase error, can be used. This filter is based on a carrier phase dynamic model and can adapt to an incomplete dynamic model and a quickly changed Doppler frequency. The performance of the proposed tracking loop is verified by several simulations.

광대역 특성을 가지는 SIW 주파수 선택 표면 설계 (Design of a Wideband Substrate-Integrated Waveguide (SIW) Frequency Selective Surface)

  • 오세명;이한준;이길영
    • 제어로봇시스템학회논문지
    • /
    • 제20권2호
    • /
    • pp.107-111
    • /
    • 2014
  • An SIW cavity is a useful tool to design an FSS which shows a rapid roll-off rate and insensitivity to polarizations and incident angles of electromagnetic waves. However, due to its high Q-factor, the FSS also shows narrow bandwidth which is undesirable for high-capacity communication. To address this drawback, we propose a novel technique to enhance the bandwidth while maintaining similar frequency response characteristics and minimizing the increase of the overall thickness of the SIW cavity FSS. In order to verify the performance of the technique, simulated frequency responses will be provided. Also, a parameter which affects the bandwidth will be studied. Finally the stability to polarizations and incident angles will be observed through the simulated results.

EPON에서 하향 데이터 트래픽의 대역폭 제한 (Bandwidth Limitation of Downstream Traffic of EPON)

  • 구자환
    • 대한전자공학회논문지TC
    • /
    • 제42권5호
    • /
    • pp.1-4
    • /
    • 2005
  • 가입자 망에서의 음성, 데이터 및 영상 등 복합 서비스를 위한 대역폭 요구를 충족시키기 위해서 연구 개발되는 EPON에 대한 전반적인 개요와 EPON의 전송 제어 방식인 MPCP에 대해서 간략하게 설명하고, EPON에서 하향 데이터에 대한 대역 제한에 대한 필요성과 하향 데이터 대역 제한을 하기 위한 방법을 제시 하였다

Butterworth Window for Power Spectral Density Estimation

  • Yoon, Tae-Hyun;Joo, Eon-Kyeong
    • ETRI Journal
    • /
    • 제31권3호
    • /
    • pp.292-297
    • /
    • 2009
  • The power spectral density of a signal can be estimated most accurately by using a window with a narrow bandwidth and large sidelobe attenuation. Conventional windows generally control these characteristics by only one parameter, so there is a trade-off problem: if the bandwidth is reduced, the sidelobe attenuation is also reduced. To overcome this problem, we propose using a Butterworth window with two control parameters for power spectral density estimation and analyze its characteristics. Simulation results demonstrate that the sidelobe attenuation and the 3 dB bandwidth can be controlled independently. Thus, the trade-off problem between resolution and spectral leakage in the estimated power spectral density can be overcome.

  • PDF

신경회로망 예측 알고리즘을 적용한 TCP-Friednly 제어 방법 (A TCP-Friendly Control Method using Neural Network Prediction Algorithm)

  • 유성구;정길도
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.105-107
    • /
    • 2006
  • As internet streaming data increase, transport protocol such as TCP, TGP-Friendly is important to study control transmission rate and share of Internet bandwidth. In this paper, we propose a TCP-Friendly protocol using Neural Network for media delivery over wired Internet which has various traffic size(PTFRC). PTFRC can effectively send streaming data when occur congestion and predict one-step ahead round trip time and packet loss rate. A multi-layer perceptron structure is used as the prediction model, and the Levenberg-Marquardt algorithm is used as a traning algorithm. The performance of the PTFRC was evaluated by the share of Bandwidth and packet loss rate with various protocols.

  • PDF