Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Design of a Wideband Substrate-Integrated Waveguide (SIW) Frequency Selective Surface

광대역 특성을 가지는 SIW 주파수 선택 표면 설계

  • Oh, Semyoung (Department of Electronics Engineering, Republic of Korea Air Force Academy) ;
  • Lee, Hanjun (Department of Electronics Engineering, Republic of Korea Air Force Academy) ;
  • Lee, Gil-Young (Department of Electronics Engineering, Republic of Korea Air Force Academy)
  • 오세명 (공군사관학교 전자공학과) ;
  • 이한준 (공군사관학교 전자공학과) ;
  • 이길영 (공군사관학교 전자공학과)
  • Received : 2013.11.20
  • Accepted : 2013.12.31
  • Published : 2014.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

An SIW cavity is a useful tool to design an FSS which shows a rapid roll-off rate and insensitivity to polarizations and incident angles of electromagnetic waves. However, due to its high Q-factor, the FSS also shows narrow bandwidth which is undesirable for high-capacity communication. To address this drawback, we propose a novel technique to enhance the bandwidth while maintaining similar frequency response characteristics and minimizing the increase of the overall thickness of the SIW cavity FSS. In order to verify the performance of the technique, simulated frequency responses will be provided. Also, a parameter which affects the bandwidth will be studied. Finally the stability to polarizations and incident angles will be observed through the simulated results.

Keywords

References

  1. S. M. Seong, "A cooperative navigation for UAVs with inertial sensors and passive sensor using wireless communication," Journal of Institute of Control, Robotics, and Systems (in Korean), vol. 19, no. 2, pp. 80-176, Feb. 2013.
  2. D. W. Lim, H. H. Choi, M. B. Heo, and S. J. Lee, "A model-based multipath estimation techniques for GPS receivers," Journal of Institute of Control, Robotics, and Systems (in Korean), vol. 18, no. 4, pp. 295-399, Apr. 2012. https://doi.org/10.5302/J.ICROS.2012.18.4.295
  3. B. A. Munk, Frequency Selective Surfaces: Theory and Design, Wiley-Interscience, 2000.
  4. H. M. Lee and Y. J. Kim, "Double-layered frequency selective surface superstrate using ring slot and dipole-shaped unit cell structure," J. Electromagn. Eng. Sci., vol. 10, no. 3, pp. 86-91, Sep. 2012.
  5. G. A. E. Crone, A. W. Rudge, and G. N. Taylor, "Design and performance of airborne radomes: a review," Proc. of IEE Pt. F, vol. 128, no. 7, pp. 451-464, Dec. 1981.
  6. M. Gustafsson, A. Karlson, A. P. Rebelo, and B. Widenberg, "Design of frequency selective windows for improved indoor outdoor communication," IEEE Trans. Antennas Propag., vol. 54, pp. 1987-1900, Jun. 2006.
  7. G. Yang, T. Zhang, W. Li, and Q. Wu, "A novel stable miniaturized frequency selective surface," IEEE Antennas Wireless Propag. Lett., vol. 9, pp. 1018-1021, Nov. 2010. https://doi.org/10.1109/LAWP.2010.2089776
  8. H. Kiu, K. L. Ford, and R. J. Langley, "Miniaturized bandpass frequency selective surface with lumped components," IET Elec. Lett., vol. 44, pp. 1054-1055, Aug. 2008. https://doi.org/10.1049/el:20081763
  9. W. T. Wang, P. F. Zhang, S. X. Gong, B. Lu, J. Ling, and T. T. Wang, "Compact angularly stable frequency selective surface using hexagonal fractal configurations," Microw. Opt. Technol. Lett., vol. 41, no. 11, pp. 2541-2544, Nov. 2009.
  10. D. Deslandes and K. Wu, "Single-substrate integration technique of planar circuits and waveguide filters," IEEE Trans. Microwave Theory Tech., vol. 51, no. 2, pp. Feb. 2003.
  11. Y. L. Zhang, W. Hong, K. Wu, J. X. Chen, and H. J. Tang, "Novel substrate integrated waveguide cavity filter with defected ground structure," IEEE Trans. Microwave Theory Tech., vol. 53, no. 4, Apr. 2005.
  12. G. Q. Luo, W. Hong, Z.-C. Hao, B. Liu, W. D. Li, J. X. Chen, H. X. Z, and K. Wu, "Theory and experiment of novel frequency selective surface based on substrate integrated waveguide technology," IEEE Trans. Antennas Propag., vol. 53, no. 12, pp. 4035-4043, Dec. 2005. https://doi.org/10.1109/TAP.2005.860010
  13. S. A. Winkler, W. Hong, M. Bozzi, and K. Wu, "Polarization rotating frequency selective surface based on substrate integrated waveguide technology," IEEE Trans. Antennas Propag., vol. 58, no. 4, pp. 1202-1213, Apr. 2010. https://doi.org/10.1109/TAP.2010.2041170
  14. G. Q. Luo, W. Hong, H. J. Tang, and K. Wu, "High performace frequency selective surface using cascading substrate integrated waveguide cavities," IEEE Microw. Wireless Compon. Lett., vol. 16, no. 12, pp. 648-650, Dec. 2006. https://doi.org/10.1109/LMWC.2006.885588
  15. M. Salehi and N. Behdad, "A second-order dual X-/Ka-band frequency selective surface," IEEE Microw. Wireless Compon. Lett., vol. 18, no. 12, pp. 785-787, Dec. 2008. https://doi.org/10.1109/LMWC.2008.2007698
  16. M. A. Al-Joumayly and N. Behdad, "Low-profile, highly-selective, dual-band frequency selective surfaces with closely spaced bands of operation," IEEE Trans. Antennas Propag., vol. 58, no. 12, pp. 4042-4050, Dec. 2010. https://doi.org/10.1109/TAP.2010.2078478
  17. R. Azadegan and K. Sarabandi, "Bandwidth enhancement of miniaturized slot antennas using folded, complementary, and self-complementary realizations," IEEE Trans. Antennas Propag., vol. 55, no. 9, pp. 2435-2444, Sep. 2007. https://doi.org/10.1109/TAP.2007.904086
  18. K. Sarabandi and N. Behdad, "A frequency selective surface with miniaturized elements," IEEE Trans. Antennas Propag., vol. 55, no. 5, pp. 1239-1245, May 2007. https://doi.org/10.1109/TAP.2007.895567
  19. M. A. Al-Joumayly and N. Behdad N, "Generalized method for synthesizing low-profile band-pass frequency selective surfaces with non-resonant constituting elements," IEEE Trans. Antennas Propag., vol. 58, no. 12, pp. 4033-4041, Dec. 2010. https://doi.org/10.1109/TAP.2010.2078474
  20. N. Marcuvitz, Waveguide Handbook, Boston Technical Publishers, 1964.