• 패션비즈니스
• /
• 제23권6호
• /
• pp.27-36
• /
• 2019

This study aimed to analyze the color differences by warp direction of textile mosaics by focusing on two representative textile wallcovering types, woven and string. Mosaics made of string can be expressed as having three-dimensionality based on color differences resulting from the warp direction of the string. String wallcoverings, unlike woven or non-woven wallcoverings, only have vertically oriented warp lamination on the backing paper without weft, and therefore, the reflection and backing color can be expressed differently depending on the angle of the mosaic. In this study, two identical wallcoverings were manufactured using the same materials but using different textile types, woven and string. The wallcoverings underwent die-cutting by each angle and were deployed in cube form. The analysis was based on ISO 5631-1:2015. The color difference between the two wallcoverings, woven and string, was shown as ΔE* 9.29. Based on the standard deviation of the color difference for each mosaic angle, woven ranged from ΔE* 0.09 to 0.94 and string ranged from ΔE* 1.92 to 3.74, showing a larger color difference. Thus, using the color differences of string to create a mosaic wallcovering improved dimensionality.

• 한국전자파학회논문지
• /
• 제21권3호
• /
• pp.269-277
• /
• 2010

본 논문에서는 0.5~2 GHz 캐비티 백 스파이럴 안테나 설계에 대하여 기술하였다. 안쪽 부분은 Archimedean 스파이럴로, 바깥 부분은 log 스파이럴로 구현된 암(arm) 패턴, 백 캐비티(backing cavity), 그리고 급전용으로 Marchand 동축형 밸런을 설계하였다. 동작 대역의 저주파 대역에서 안테나 특성을 향상시키기 위하여 종단 저항을 사용하였다. CST사의 MWS툴을 이용하여 시뮬레이션 하였고, VSWR, 축비(axial ratio), 이득 그리고 반전력 빔폭을 고찰하였다. 최종적으로 제작 및 측정을 통해 설계 방법의 타당성을 검증하였고, 상용 스파이럴 안테나와의 성능을 비교하였다.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.181-184
• /
• 2003

This paper explores the perceptual relevance of acoustical correlates of emotional speech by using formant synthesizer. The focus is on the role of mean pitch, pitch range, speed rate and phonation type when it comes to synthesizing emotional speech. The result of this research is backing up the traditional impressionistic observations. However it suggests that some phonation types should be synthesized with further refinement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.107-109
• /
• 1995

This paper considers backing structure of non-contact steel plate using magnectically levitation and aspect-quality factor is defined by estimation of electromagnet-aspect attraction steel plate. Characteristics of attraction power is studied in cylindrical electromagnet, U-type electromagnet, E-type electromagnet by aspect-quality factor. Designing and manufacturing electromagnet attraction steel plate, propriety of experimental results is confirmed.

• Tribology and Lubricants
• /
• 제34권2호
• /
• pp.43-48
• /
• 2018

This paper presents the thermohydrodynamic analysis of tilting journal pad bearings supporting a power turbine rotor applied to a 250 kW super-critical $CO_2$ cycle. In the analysis, the generalized Reynolds equation and 3D energy equation are solved to predict oil film temperature and the 3D heat conduction equation is solved for pad temperature. The power turbine rotor is supported by two tilting pad bearings consisting of five pads with an oil supply block between the pads. Copper backing pads with higher thermal conductivity compared to steel backing pads are adopted to improve thermal management. The predicted maximum pad temperature is around $55^{\circ}C$ which is approximately $15^{\circ}C$ higher than oil supply temperature. In addition, the predicted minimum film thickness is 50 mm at a rotating speed of 5,000 rpm. These results indicate that there is no issue in the thermal behavior of the bearing. An operation test is performed with a power turbine module consisting of a power turbine, a reduction gear and a generator. Thermocouples are installed at the 75% position from the leading edge of the pad to monitor pad temperature. The power turbine uses compressed air at a temperature of $250^{\circ}C$ in its operation. The steady state pad temperatures measured in the test show good agreement with the predicted temperatures.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.15-22
• /
• 2008

For the improvement of letterpress printing paper quality, special fibers obtained from the sea were used by mixing with wood fibers. The sizes of the special fibers, which were from red algae in the sea, were 0.5-1 mm in length, and 3-7 ${\mu}m$ in width, respectively, and the fibers were supplied by Pegasus Research Inc. for the study. From the study, it was found that 10% addition of algae fibers greatly improved paper surface strength and internal bonding strength. The compressibility was estimated by utilizing 'Print-surf method' at high clamping pressure and with hard backing. Again, 10% addition of algae fibers greatly improved the compressibility of the paper. These results were expected that algae and wood fibers were distributed evenly through the sheet, and integrated one another to leave no empty space inside the paper.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.728-735
• /
• 2003

This paper shows the possibility of performing Lap joint using the friction stir welding with $2mm^t$ aluminum alloy plate and the determination of tool-dimensions for FSW in milling machine. This research also is reported on obtaining the tensile-shear strength, 91.3 (MPa) and the energy absorption, 26.3 (J) for Lap jointed specimen. The optimal tool-dimensions and method for Lap joint using FSW is as follows; each diameter of shoulder and pin is $9\phi(mm) and 3\phi(mm)$, the length of pin is 3.6(mm), Pressing the shoulder of tool into original base metal is not reasonable.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.110-114
• /
• 2000

This paper shows the possibility of performing the friction stir welding and the development of optimizing tools for FSW with 2mm thick plate of aluminum alloys using milling machine. This research can be reported on achieving above 90% of the tensile strength in 1050 aluminum alloys friction stir welded in the room temperature. This welding process is very simple and does not require filler metal eliminates straightening of the workpiece. It is currently attracting interest from different industries working with aluminum alloys.

• 한국지능시스템학회논문지
• /
• 제10권5호
• /
• pp.423-431
• /
• 2000

In this paper, the effect of computing time-delay in the real-time digital fuzzy control systems is investigated and the design methodology of a real-time digital fuzzy controller(DFC) to overcome the problems caused by it is presented. We propose the fuzzy feedback controller whose output is delayed with unit sampling period. The analysis and the design problem considering computing time-delay is very easy because the proposed controller is syncronized with the sampling time. The stabilization problem of the digital fuzzy control system is solved by the linear matrix inequality(LMI) theory. Convex optimization techniques are utilized to find the stable feedback gains and a common positive definite matrix P for the designed fuzzy control system Furthermore, we develop a real-time fuzzy control system for backing up a computer-simulated truck-trailer with the consideration of the computing time-delay. By using the proposed method, we design a DFC which guarantees the stability of the real time digital fuzzy control system in the presence of computing time-delay.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.153-160
• /
• 2002

This paper shows the possibility of performing Lap joint using the friction stir welding and the determination of tool's dimensions for FSW in Milling machine. This research also is reported on obtaining the tensile-shear strength, 9.319 ( kgf/mm$^{2}$) and the energy absorption, 2,682 (kgf-mm) under this experiment. The optimal tool's dimensions and method for Lap joint in 2tmm aluminum alloy plate using FSW is as follows; The diameter of shoulder and pin are 9 $\phi$mm and 3$\phi$mm, the length of pin is 3.6mm. The conditions of shoulder of tool is not pressed into original base metal.