• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.732-734
• /
• 2002

The rotor thermal analysis consists of determining the heat load to the rotor, sizing the cryogenic system, and ensuring that the HTS rotor will operate at the design goal of 30 K. The heat load to the rotor is due to heat conduction through the torque tubes, current leads, instrumentation. and radiation from the thermal shield and the end caps. Coil operating temperature is determined from the coil losses and the heat transport to the coolant. An FEM thermal conductivity model is developed to allow calculation of heat transport in HTS field coil according to the heat exchanger shape and coolant feeding method. The losses determine the size of the cryocooler.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2082-2084
• /
• 1997

This paper proposes a new control strategy of bidirectional uninterruptible power supply(UPS) with the performance of active power filter which compensate the harmonics and reactive power. To improve the transient response for the effective compensation in active power filter mode, it is considered that a simple and precise calculation method of the compensation reference current for the harmonics and reactive power compensation. So a novel closed-loop control strategy is used to calculate the reference current. And the current regulated instantaneous voltage control scheme is used in back-up power mode. The system model and control algorithm are described and analyzed, and the system Performance is verified by the simulation and experimental results.

• 한국국방경영분석학회지
• /
• 제30권1호
• /
• pp.15-29
• /
• 2004

The existing CSP systems is inefficient and brings about waste of budget in some operating aspects which show accumulation of unnecessary items, omitted or running short items and limitation of timely use of them. The purpose of this study is to analyze the actual situation of existing CSP(calculation and estimation of CSP requirements), and to suggest a few methods (post control system by activating buy-back system, and middle and long term operating system itself in relation to budget) to improve the CSP operating systems in order to maximize the effectiveness of combat strength and to contribute to the economic efficiency of defense management. The results show that improved method is efficient and effective by comparing with some actual data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.880_881
• /
• 2009

This paper improves the calculating method about the inductance with the high order frequency coreloss. It is different in which the analyzed inductance for calculating IPMSM and the measured thing for experiment. Due to this phenomenon, the expected input voltage differs from the inquired input voltage for operating the motor. This results from the coreloss margin which have both the 1st order and high order frequency value. For reducing the inductance error, after calculating the equivalence coreloss resistance with having the 1st order frequency Back_EMF and coreloss, designing the inductance with the high order frequency which occurred by the coreloss of high order frequency, and comparing the renovated inductance analysis value with the measured thing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.222-225
• /
• 2006

The effect of lubrication on the development of textures and Microstructure was studied by different lubricating condition during hot rolling of AA1050 aluminum alloy. Hot rolling without lubrication led to the evolution of the pronounced through-thickness texture gradients, whereas hot rolling with lubrication gave rise to the formation of uniform rolling texture in the whole thickness layer. The variation of texture and microstructure according to hot rolling condition are investigated by X-ray diffractometer (XRD) and Electron Back-Scattered Diffraction (EBSD). The experimental results were discussed base on the finite element method (FEM) simulation. FEM calculation reveals that a larger friction between roll and sheet causes the deviated strain state from a plane strain leading to the formation of shear textures in the thickness layers close to the surface.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.16-22
• /
• 2013

This paper presents the analysis and optimization of air-core permanent magnet linear synchronous motor with overlapping concentrated windings to achieve high thrust density, high thrust per copper losses and low thrust ripple. For the motor design, we adopt equivalent magnetizing current (EMC) method to analyze the magnetic field and give analytical formulae for calculation of motor parameters such as no-load back EMF, dynamic force, thrust density and thrust per copper losses. Further, we proposed a multi-objective optimization by genetic algorithm to search for the optimum parameters. The design optimization is verified by 2-D Finite Element analysis (FEA).

• 한국학교수학회논문집
• /
• 제5권2호
• /
• pp.23-31
• /
• 2002

The purpose of this study is to analyze thinking process in problem solving and to get some teaching materials to improve students' problem solving abilities. For this study, 14 girl and boy students in highschool were tested with 7 testing questions. The whole process of students' problem solving was observed by using 'Thinking aloud', recorded by Audio Tape and finally drawn up to Protocol. On the basis of that Protocol, coding system was set up and characteristics of thinking process in each stage were analyzed. -In the stage of planning, successful problem solvers tried to check the properties of words included in problems(Pr) and made it clear that they were seeking(O) -In the stage of planning, students used abstraction strategy(Ab, making equation(E) or using variable(V)) appropriately could solve more difficult problems. Successful problem solvers turned used unsystematical trial into systematical method and were good at using partial objects, assistant factors. - In the stage of carring out the plan, successful problem solvers to reduce the error, check the purpose, used formula, knowledge and calculation. -In the looking back stage, successful problem solvers generalized the answer and checked the total process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.164-169
• /
• 2003

This paper is presented to a theory comparing each different systems by quantitatively analyzing reliability. availability, maintenance and safety. Reliability R(t) produced by the method here is used for MTBF calculation of system as reliability of normal state. It is possible to produce the failure rate of unsafety state through modelization of system only to use the failure rate, after yielding the failure rate of failure mode to each unsafety sate in case that unsafety state is defined with the function of systems applied.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권12호
• /
• pp.629-637
• /
• 2005

This paper proposes a new anti-windup strategy to suppress integrator windup for PI speed controller and to be implemented on the existing system with minimal modification. When the speed control mode is changed from P controller to PI controller. an appropriate initial value for integrator is assigned. This value restricts overshoot and high settling time. Also, the proposed method guarantees the designed performance independent on operating conditions, i.e. different set-point change and load torque. Simulation and experimental results for PMSM speed controller have shown its superior performance compared with the conditional integration and tracking back calculation.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.784-787
• /
• 2004

타원곡선 암호시스템에서의 가장 줄기가 되는 연산은 스칼라 곱셈 연산이다. 본 논문에서는 기존의 두배점-덧셈 (double-and-add) 알고리즘으로 처리하였던 스칼라 곱셈 연산을 개선하여 네배점-덧셈(fund-and-add) 알고리즘을 사용하기 위하여 네배점 (point quadruple) 연산을 유도한다. 유도된 식은 C 프로그램을 사용하여 실제 계산에 응용하여 증명하였다. 네배점 스칼라 연산은 타원곡선 암호시스템의 효율적이고 빠른 연산을 처리하는데 응용될 수 있다.