• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.3
• /
• pp.143-155
• /
• 2011

Recently, in forest areas of Gyeonggi-Do where golf courses are developed indiscriminately due to the rapid increase in demand, two and three golf courses are being concentrated and combined to develop and it's occurring lots of problems. This study therefore, aims to examine their problems and propose environment-friendly improvements of combined development, by analyzing laws related to golf course's location and the current location status. The results of this study are as followings; Firstly, when analyzing related laws, it was found that unified standards should be established in relation to regulation of the external conditions of golf course sites and individual index. Secondly, standards of a proper separated distance are needed, when developing golf courses. Thirdly, we need to preferentially preserve areas where should be protected environmentally, and establish criteria approving golf courses built close to the boundary of a buffer area only, by introducing the concepts of a buffer area based on the UNESCO MAB. Lastly, we have to set up criteria considering Network elements for maintaining the connectivity of the ecosystem.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.4
• /
• pp.123-131
• /
• 1997

Since the industrial revolution. the growth of cities has been especially apid and the rate of ulbanization has been high. This urban development is encroaching on the natural environment because the cities are developed with not only residential estates, industrial area and buildings but also with infrastructure. The surface area of the city is sealed ,with pavement whereas nature is disturbed and modified. The hydrological cycle in the city is inf1uenced by the change of land use I. e., from forest to agricultural land, talc draining of wetlands and above all the increase of built-up areas. The surface retention and interception of precipitation in the city is reduced. because the surface area is now smooth and solid. The characteristics of the hydrological cycle in the city are increased runoff, reduced evapotranspiration and infiltraction . We have too much faith in technology although it may cause more unforseen problems. We build more river banks and 'emulation dams and straighten rivers and streams in order to protect ourselves from disasters.. However. the results of hose developments are often higher$.$ water levels, the disturbance of aquatic ecosystems and the reduction of biodiversity. Therefore, we should examine problems from the hydrological cycle in cities and study a natural system as close cities to nature as possible. This paper shows the problems caused by the hydrological cycle in the city. The ecology-oriented method and design must be used in order to protect our environment from dicturbance.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.1
• /
• pp.23-32
• /
• 2018

This study starts from the architectural and urban interest to integrate the daily life and behavior of residents in the city of Seongnam and to sustain the community. A fixed abode is something that can not be separated from the place and should be approached from a comprehensive perspective reflecting the physical and social conditions of the region. Although residential neighborhoods have a residential walking range, which has a steep slope, it has been formed in the suburbs of the residential area where commercial facilities are activated organically. The humanities and social organizations of the residents are integrated with the physical space and act as constituent factors of major cities. This is an attempt to suggest improvement and activation of existing cities based on their daily lives, rather than destroying cities and creating new ones. Also, it is proposed to 'Neighborhood Street' as an indicator of a uniform urban renewal plan for existing urban regeneration projects. Based on the definition of the city of living in the city, the center of the city will be located in the center of the city, and it will be the center of the city's bustling streets.

• Wind and Structures
• /
• v.30 no.6
• /
• pp.547-558
• /
• 2020

With the development of economy and construction technology, more and more bridges are built in complex mountainous areas. Accurate assessment of wind parameters is important in bridge construction at complex terrain. In order to investigate the wind characteristics in the high-altitude difference area, a complex mountain terrain model with the scale of 1:2000 was built. By using the method of wind tunnel tests, the study of wind characteristics including mean wind characteristics and turbulence characteristics was carried out. The results show: The wind direction is affected significant by the topography, the dominant wind direction is usually parallel to the river. Due to the sheltering effect of the mountain near the bridge, the wind speed and wind attack angle along the bridge are both uneven which is different from that at flat terrain. In addition, different from flat terrain, the wind attack angle is mostly negative. The wind profiles obey exponential law and logarithmic law. And the fitting coefficient is consistent with the code which means that it is feasible to use the method of wind tunnel test to simulate complex terrain. As for turbulence characteristics, the turbulence intensity is also related to the topography. Increases sheltering effect of mountain increases the degree of breaking up the large-scale vortices, thereby increasing the turbulence intensity. Also, the value of turbulence intensity ratio is different from the recommended values in the code. The conclusions of this study can provide basis for further wind resistance design of the bridge.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2012

This study used GIS method for the characteristic analysis of farmstead location in study area. The present study surveyed the coordinates of location for 76 livestock farmsteads with big size in rural areas within city of Cheonan. Based on the surveyed data, this study analyzed the spatial characteristics of location for the farmsteads by using both new evaluation criteria and their corresponding GIS (geographic information system) layers developed in this research. The criteria consist of six factors, which are 2 geographic factors for slope(SLO) and aspect(ASP) of earth surface, 3 accessability factors for distance from water area(DWA), road(DRO), and built-up area(DBA), including type of landuse(TLA). In the analysis results of six criteria using the grid funcations of GIS, the highest distributed ratios of the farmsteads per criterion were found at the lower slope area less then 2% in SLO, the area with south and south-east direction in ASP, the area with distance between 500m and 1,000m in both DWA and DRO, the area within 500m in DWA, and the paddy and upland area in TLA. As new finding of this study, these analysis results seemed that the farmsteads have been located at the better places with the priority to build and manage conveniently and economically.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.2 s.19
• /
• pp.49-55
• /
• 2003

The purpose of this study is to analyze the impact of land-use and population change in rural area by new expressway. Chungbu expressway constructed in 1987, going through the south area of Kyunggi province from Seoul, was selected as a case expressway, and also 2 cities and 18 subdivisions of county in its surrounding area, as a case study area. To analyze the change characteristics before and after the construction, land-use maps of 1986 and 1996 were collected, including the census data for the years in cities and counties yearbooks. Remote sensing technology was applied to classify the land-use maps with six types of land use. Geographic information system was also used for spatial analysis, such as the land-use and accessibility changes. A 5 km buffer zone from interchange of the expressway showed about two times increase of urbanized built-up area than a 5 km buffer zone from the expressway. Accessibility from Seoul and cities was improved in most areas, which is accessing to Seoul through existing Youngdong expressway. Ten rural areas showed increased population with accessibility of average 52 minutes to Seoul and 19 minutes to cities, while eight areas showed decreased population with average 73 minutes to Seoul and 35 minutes to cities. This shows that the threshold value, which is time distance to Seoul and cities for population increase or decrease, one and half hours, respectively. Urbanized area was increased in most areas, even in population decrease areas, so this indicates that there are thinning rural areas, increasing urbanized area while decreasing population.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.78-86
• /
• 2009

A capacity calculation and process analysis is a very important part for the entire ship production planning. Ship's production plan is set up with a concept that the product is produced based on the capacity achievable by the processes while general manufacturing sets up the production plan based on product lead-time. Therefore, in case the calculation of capacity for each process of shipbuilding yard is different from actual conditions, a series of production plan - ship table composition, dual schedule plan and execution schedule plan, etc - may accumulate errors, lose reliability of planning information and cause heavy cost deficit in this course. In particular, in case of new shipbuilding yard, stocks between processes are built up and half blocks are not supplied in timely manner, and that is sometimes due to the clumsiness of the operator but it is more often because of the capacity to execute each process is not logically calculated. Therefore, this paper presents the process to calculate the assembly leadtime and assembly process capacity for shipbuilding yard assembly factory. This paper calculated the block type for calculation of assembly lead time based on block DAP(detailed assembly procedure), and introduced cases that calculate production capacities by assembly surface plate by considering the surface plate occupied area of the blocks that change depending on assembly field area and assembly processes through assembly simulation.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.455-466
• /
• 2013

The aim of this study is to seek application plans of National Ecosystem Survey database based on comparison and examination of feasible analysis methods for distribution characteristics of alien plants. In order to set up a correlation analysis method between alien plants and environmental factors, we had reviewed the 3rd National Ecosystem Survey guide book and consequently, two kinds of analysis method were tested. One was 1/25,000 scale map boundary based analysis and the other was representative mountain area based analysis. In this study we restricted the research area to select reliable surveyed database from whole "2011 National Ecosystem Survey flora database" according to two major criteria. First, an area defined by 1/25,000 scale map boundary and representative mountain area where the number of surveyed flora records should be within top 20%. Second, land cover map should also be built up inside that area. As a result, 25 map boundaries and 25 representative mountain areas were extracted to be analyzed. To limit a boundary for every representative mountain area we had analyzed distribution of environmental factors around that area by manual inspection with SPOT-5 remote sensed satellite image then designated 3km buffer zone from each alien plant location in that area. After then, naturalized index (NI) and urbanized index (UI) was calculated and correlations analysis was carried out. With the result of correlation analysis by map boundary only agricultural land area showed significant value of r (0.4~0.6, correlated) and the rest of factors did not. In the case of representative mountain area, the result showed that agricultural land, road and forest area showed significant value of r (0.6~0.8, highly correlated) which was corresponding to existing researches. Therefore, representative mountain area based method is preferable when using the alien plants database of National Ecosystem Survey for species distribution analysis. And also, considering the way of database utilization is strongly suggested at the first stage of survey planning for promoting active use of national ecosystem survey database.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.121-128
• /
• 2016

Purpose: The vacuum glazing should constantly retain the gap in vacuum state to maintain high thermal performance. To do so, pillars are used to prevent the glazing from clinging to each other by the atmospheric pressure and therefore surface of the vacuum glazing is consistently affected by residual stress. The vacuum glazing could be applied to curtain wall systems at spandrel area to fulfill a rigorous domestic standard on U-value of the external wall. However, this can lead to high glazing temperature increase by heat concentration at a back panel and finally thermal stress breakage. This study experimentally determined weakness of the vacuum glazing systems on the thermal stress breakage and investigated effect of the residual stress. Method: The experiment first built two scale-down mock-up facilities that replicate the spandrel area in curtain wall, and then installed single low-e glass and vacuum glazing respectively. The two mock-up facilities were exposed to outside to induce the thermal stress breakage. Result: The experiment showed that the temperature occurred the thermal stress breakage was $114.4^{\circ}C$ for the single low-e glass and $118.9^{\circ}C$ for the vacuum glazing respectively. The result also showed the vacuum glazing reached the critical point earlier than the single low-e glass, which means that the vacuum glazing has high potential to occur the thermal shock breakage. In addition, the small temperature difference between two glazing indicates that the residual stress scarcely affects breakage of the vacuum glazing.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.2
• /
• pp.170-203
• /
• 2018

From the period of Japanese colonialism up to the present, the researchers of archaeology and ancient history in Korea and Japan have paid much attention to the Honam area. Recently the ruins and relics of Wae lineage are often discovered at archaeological excavation sites in this region. In particular, at least 17 keyhole-shaped mounds were confirmed. The fact that three mounds were built on one site was newly revealed. Haniwa, a representative earthenware object of the Kofun period in Japan, was discovered as well. Therefore, the study of a historical meaning of archaeological materials about Wae lineage in the Honam area thus far must be reexamined. The ruins and relics of Wae lineage in the Honam area have been studied by selecting only specific cases. I identified all the ruins and relics of Wae lineage in the Honam area and analyzed the process of their change in this paper. I reviewed the relationship between Wae and Mahan, and the purpose of their negotiation based on archaeological characteristics, changing processes, and historical records on a quarterly basis. The ruins and relics of Wae lineage have increased and widely spread since the early period of the 5th century in the Honam area. This tendency continued until the late period of the 6th century. Weapons of Wae lineage were introduced and tombs in the style of Wae were built from the late 4th century to the early period of the 5th century (TG232~TK216 period). Sueki was introduced from the middle to late period of the 5th century (TK208~TK23 period). Keyhole-shaped mounds and tombs in the style of Wae were built from the late period of the 5th century to the early period of the 6th century (TK47~MT15 period). Japanese weapons were introduced from the middle to late period of the 6th century (TK10~TK209 period). In other words, the archaeological appearance is different in each quarterly period. There was an intensive diplomatic relationship between Baekje and Wae in the TG232~TK216 period. The military might be included in a mission of Wae. The materials of Wae lineage of this period are likely to be related to this. Sueki spread to the inland part of the Honam area in the TK208~TK23 period. This Sueki tends to be excavated on advantageous sites for the accumulation and distribution of supplies. The main characters of the keyhole-shaped mounds are presumed to be a group of traders which were under the control of a certain influence in the north of Kyushu. The keyhole-shaped mounds were abruptly built at some distance from mounds of the leaders in the Honam area. Additionally, there was no special influence base to which the characters of the keyhole-shaped mounds belonged in the surroundings. However, it might have been impossible for the group of traders to build the keyhole-shaped mounds without the support from the residents at all because there was a big difference in the building technology of the keyhole-shaped mounds between Japan and the Honam area. The time of building some keyhole-shaped mounds is the same or almost the same with that of the mounds built for the regional leaders. This proves a close relationship with the residents as well. What do the archaeological materials of Wae lineage which have been used and buried mean over 200 years in the Honam area? Geumgwan Gaya, which had exported iron resources to Japan, perished in the early period of the 5th century. Instead of Gaya, the Honam area might have played an important role to supply the necessary resources to Japan. We assume that the Japanese (Wae) actively worked to acquire various resources focusing on the underground resources in the Honam area.