• The Science & Technology
• /
• v.1 no.2 s.2
• /
• pp.15-23
• /
• 1968

1. 서 론 2. 제외국의 배전전압승압현황 A. 일차배전전압 B. 이차배전전압 3. 일차배전전압승압의 경제성 A. 전기적특성 B. 경제성 C. 주요기재 4. 이차배전전압승압의 경제성 A. 배전방식별손실비율 B. 전기기기사용면에서의 비율 C. 경제성 5 결 론 A. 일차배전저압 B. 이차배전전압

• Radiation Oncology Journal
• /
• v.17 no.2
• /
• pp.158-165
• /
• 1999

Purpose : To investigate the percentage of colonies wi1h16or more cells distribution of human skin fibroblast according to in vitro aging, and to evaluate the relationship between percentage of colonies with 10 or more cells and in vivo donor age in human skin fibroblast culture. Material and Method : C1, C2, C3a, and C3b human skin fibroblast samples from three breast cancer patients were used as subjects. The C1, C2, and C3a donor were 44, 54, and 55 years old, respectively. C3a and C3b cells were isolated from the same person. Single cell suspension of skin fibroblasts was prepared with primary explant technique. One hundred cells are plated into 100m1 tissue culture flask and cultured for two weeks. The colony size was defined as colonies with 16 or more cells. The cultured cell was stained with crystal violet, and number of cells in each colony was determined with stereo microscope at $\times$10 magnification. Passage number of C1, C2, C3a and C3b skin fibroblast were 12th, 17th, and 14th, respectively. Results : Percentage of colonies with 16 or more cells of skin fibroblast samples decreased with increasing in vitro passage number. In contrast, cumulative population doublings of skin fibroblast sample increased with increasing in vitro passage number. Percentage of colonies with 16 or more cells also decreased with increasing population doublings in human skin fibroblast culture. There was strong correlation with percentage of colonies with 16 or more cells and population doublings En C3a skin fibroblast sampie. At the same point of population doublings, the percentage of colonies with 16 or more cells of the young C1 donor was higher level than the old C3a donor. Conclusion : The population doublings increased with increasing in vitro passage number but percentage of colonies with 16 or more cells decreased. The results of this study imply that percentage of colonies with 16 or more cell is useful as a indicator of in vitro human skin fibroblast aging and may estimate the in vivo donor age.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1035-1041
• /
• 2012

This paper examines the effects of fundamental variables on stock returns. Therefore, the major purpose of this study is to identify fundamental variables having a systematical effect on the stock return. The paper uses panel data analysis. We find that the results of regressions say that firm size, book-to-market ratio(B/M), earning-to-price ratio(E/P), cash flow-to-price ratio(C/P) can explain the differences in average returns across stocks.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.530-538
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+}$$\delta$/ (110 K phase) high $T_{C}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with 5~50 wt％ MgO were sintered at 820~86$0^{\circ}C$ for 24 h. The structural characteristics, critical temperature and grain size of the samples with different MgO contents were analyzed by XRD and SEM. As the MgO content increased, the intensity of MgO peaks and ratio of Bi-2212 phase in superconductors were intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.d.creased.d.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.235-238
• /
• 2002

Leuconostoc mesenteroides B-512FMCM, 742CB3, 1299C의 dextransucrase들의 glycosyl기 전이 특성을 수용체 반응과 transglycosylation반응을 통해 확인하였다. 수용체 반응의 경우 10% sucrose에 수용체로 4% maltose를 첨가하여 반응시켰고 transglycosylation반응은 다른 크기, 다른 농도 그리고 다른 종류의 가지 결합의 dextran 을 합성하는 효소들을 이용하여 수행하였다. 각각의 효소들은 maltose를 이용한 수용체 반응에서 유사한 종류의 수용체 산물들을 합성한 것에 비해 세 dextransucrase들 (512FMCM, 742CB3, 1299C) 을 일정 비율로 혼합하여 maltose를 이용한 수용체 반응 결과 512FMCM 효소의 활성 비율을 줄이고 742CB3, 1299C 효소의 활성 비율을 증가시켰을 경우에는 ${\alpha}-1{\rightarrow}$3 의 가지결합이 많은 dextran 을 합성하였다. 또한, 세 가지 다른 구조의 dextran(T40, 742CB, B1299)에 100mM maltose을 수용체로 첨가해 각각의 dextransucrase(512FMCM, 742CB3, 1299C)와 transgly cosylation을 수행한 결과 1299C 효소가 세 종류의 dextran(T40, 742CB, B1299) 에 모두 가지 결합이 많은 dextran을 합성함을 확인하였다. 또한 ${\alpha}-1{\rightarrow}$6 결합으로 주로 이루어진 2%, 5% dextran(T10, T40, T7O, T500, T2000)에 dextransucrase(512FMCM, 742CB3, 1299C)를 반응시켜 기존의 dextran 보다 가지 결합이 더 많이 형성된 transglycosylation 산물을 합성하였다. 이때 maltose를 첨가했을 경우 이 수용 체에 의해 많은 ${\alpha}-1{\rightarrow}$6 가지 결합의 dextran 을 합성함을 확인하였다.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1104-1109
• /
• 2001

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+}$$\delta$/ high $T_{c}$ superconductors containing As as an additive were fabricated by a solid-state reaction method. Samples with Ag of 10wt%, 30 wt% and 50 wt% each were sintered at 86$0^{\circ}C$~875$^{\circ}C$ for 24 hours. The structural characteristics, critical temperature and grain size with respect to Ag contents were analyzed by XRD(X-ray Diffraction) and SEM(Scanning Electron Microscope), respectively. As Ag contents increased, XRD peaks of g in Bi-2223 phase superconductors intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.increased.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.93-101
• /
• 2010

The demand for elastic pavement, providing comfort for pedestrians is expected to increase continuously but the lack of a standard for materials mixing ratio, that is, the optimal mixing ratio between ERDM chip and polyurethane binder, is still in a trial and error stage. This study aimed at recommending an optimal mixing ratio for elastic landscape pavement through a coherence and resilience test depending on ratio. The test result is outlined as follows. In a tensile strength test, samples B and C indicated a close positive relationship between the binder mixing ratio and tensile strength, indicating that the higher the mixing ratio the higher the tensile strength. In a hardness test, none of samples A, B or C indicated a statistical interrelationship between the binder mixing ratio and hardness. That is, the hardness of the elastic pavement material remained unchanged, irrespective of the binder mixing ratio. In a resilience lest, Samples A and B indicated a close negative interrelation between mixing ratio and resilience, indicating that the higher the mixing ratio, the lower the resilience. Upon analyzing the optimal mixing ratio based on test results, an increase in tensile strength began to slow at a 20% mixing ratio, while resilience began to reduce rapidly at 22%, Thus the optimal range for a mixing ration appeared to be 20~22%. The outcome of this study could to provide guidance for improving the elasticity and stability of elastic pavement.

• Journal of Elementary Mathematics Education in Korea
• /
• v.23 no.3
• /
• pp.273-288
• /
• 2019

This study focuses on understanding proportionality, in particular, what constitutes relational understanding of a:b=c:d, which is called proportional expression. The meanings of a:b=c:d are analyzed and some suggestions are offered for improving the teaching and learning of it. The equation a:b=c:d has three different meanings. First, it represents two different structures in one proportional situation. Second, it represents a common structure in two different proportional situations. Finally, it represents a number or a quantity underlying in different proportional situations. It is important to choose and use a unit flexibly to understand the first and the second meanings of a:b=c:d, Double strip diagram and double number line are useful to visualize the meanings of a:b=c:d. In addition, what a number or a quantity in the third meaning of a:b=c:d refers to in proportional situations should be emphasized in teaching and learning of a:b=c:d.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.271-278
• /
• 2009

This study was conducted to investigate the effect of the mixture ratio of the inorganic soil amendments on the soil physicochemical properties. In this experiment, three kinds of soil amendments which had similar pH, EC and particle size, the A, B and C, were tested. The mixture ratio of soil amendment were 0%, 3%, 5%, 7% and 10% (V/V) incorporated with sand which met to the USGA(United State of Golf Association) particle standard. To analyze the effects of amendment on chemical soil properties, pH, EC(electrical conductivity) and CEC(cation exchangeable capacity) were measured. The porosity, bulk density and hydraulic conductivity also measured to analyze the changes of physical properties. In the chemical properties, pH was significantly related to the mixture ratios of amendments, A and C(P<0.05), CEC and EC also related to the ratios of C(P<0.01). When the results were applied to the USGA standard of the soil physical properties, the optimum mixture ratios of each amendment were 3% in A and B, and 7~10% in C. To analyze the corelation of mixture ratio versus to physical character, volume of porosity was significantly related to the ratio of B (P<0.05), and showed similar corelation in porosity and hydraulic conductivity with ratio of C(P<0.05). These results indicate that types and mixture ratio of inorganic soil amendments should affect on soil physio-chemical properties of root zone on USGA sand green.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.943-954
• /
• 1997

Forces needed for orthodontic tooth movement are obtained from various appliances such as orthodontic wires or elastic rubber. Orthodontic elastic rubber is widely used clinically, but permanent deformation and force decay may occur from the environmental changes, time of clinical use and the extent of the stretch, making the Prediction of force being applied difficult. The Present study examined and compared the changes in residual force between three brands of elastomeric chains (Ormco Generation II Power Chains ; brand A, RMO : Energy-Chain ; brand B, Unitek : AlastiK ; brand C) under various environmental conditions, amount of initial force, types of elastomer and the rate of extension. The characteristic physical properies of the elastomeric chains were as follows. 1. In all three brands, the residual force ratio was largest when the chains were stored in air, with no difference between water and saliva. 2. In all three brands, after 24 hours, there was no statistical difference in residual force ratio according to the initial force level. 3. In Brand A and B, the presence of filament had no correlation with the residual force ratio. In Brand C force decay was more severe when the chain contained filament. 4. In each brand, rate of extension had no effect on residual force ratio. 5. Brand B showed relatively higher residual force ratio compared to other brands.