• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2315-2326
• /
• 2016

This paper discusses the elimination of DC voltage deviation and the enhancement of load current sharing accuracy in multi-terminal high voltage direct current (MT-HVDC) systems. In order to minimize the power line losses in different parallel network topologies and to insure the stable operation of systems, a decentralized control method based on a modified droop control is presented in this paper. Averaging the DC output voltage and averaging the output current of two neighboring converters are employed to reduce the congestion of the communication network in a control system, and the decentralized control method is implemented. By minimizing the power loss of the cable, the optimal load current sharing proportion is derived in order to achieve rational current sharing among different converters. The validity of the proposed method using a low bandwidth communication (LBC) network for different topologies is verified. The influence of the parameters of the power cable on the control system stability is analyzed in detail. Finally, transient response simulations and experiments are performed to demonstrate the feasibility of the proposed control strategy for a MT-HVDC system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.18-27
• /
• 2002

Aerodynamic shape optimization of two-dimensional airfoils in inviscid compressible flows is performed using a continuous adjoint formulation on unstructured meshes. Accurate evaluation of the gradient is achieved by using a reconstruction scheme based on the Laplacian averaging. A least-square method with extended stencil is used for flow gradient calculations. Proper convergence criterion is studied on Euler and adjoint equations for efficient design. The present method has been applied to RAE2822 and NACA0012 airfoils such that wave drag can be minimized by removing the shock wave. An inverse design is also performed to recover the shock wave on the designed RAE2822 airfoil.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.109-117
• /
• 2015

In this paper, we proposed error-reducing method to source or measure a current or voltage for LED in the I-V characteristic analysis system using a digital signal processor (DSP). this method has the advantage of reducing a non-linear circuit error and random error. random error can be reduced using recursive averaging technique and non-linear circuit error can be reduced using 2rd polynomial regression calibration parameters fitting with measured sample data. it corrects measured error of IR, VR, VF1, VF2, VF3 of LED using calibration parameters. experimental results show that can be performed with about 0.017~0.043% accuracy.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.612-617
• /
• 2009

In a DCT coding, degradations called block artifact and mosquito noise are appeared in reconstructed pictures. They should be reduced in post processing after decoding without superabundant processing. However, an estimation of mosquito noise is rare because of its difficulty. To realize an estimation of mosquito noise level, we extract a block that mosquito noise will be easy to occur. Mosquito noise level is calculated at a selected side of the block. In this processing, only the sides of high probability block are used. Then, a block value is taken by averaging. Finally, the picture value is calculated by averaging of this. Estimation method is evaluated by using the MPEG-4 decoded pictures. Quantization scale of coding and the estimated mosquito noise level are compared. As the results, we recognize the proposed method gives almost reasonable mosquito block and absolute level. Father, adaptive filter is controlled by the estimated mosquito noise level. It is recognized that the high quality of decoded picture is kept and the mosquito noise is reduced effectively at the picture with degradation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.116-123
• /
• 1999

of a block if the method uses the quantization parameter depending on the bitrate control, and consequently it influence the image quality of video. In this paper, we propose a new method using the following three steps : calculating an averaging (Average of Sum, AS) value in each pixel's block of images, earning an average value of differences between each pixels and As (Differential Averaging Block Pixels, DABP), and finally achieving an improved coefficient values by the DABP and DCT coefficients. Simulation results show that the quality of moving picture could be improved by the proposed method.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.377-382
• /
• 2009

modelling of the buck converter in photovoltaic power conditioning system is not a possibility of doing with input-output relationship from existing procedures. Because the input current and voltage of the buck converter in fluctuate at any time. The controller which design with the method which has like this error cannot have a good efficiency. In this paper, firstly, in order to design accurate controller of buck converter, new model is proposed. The modeling used a state-space averaging method and came to accomplish. Secondly, the process which design the controller is described. Finally, the simulation results are analyzed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.2
• /
• pp.73-81
• /
• 1997

The main purpose of this study was to develop a new method for evaluation of stream naturalness in order to appraise and prescribe for streams effectively in the process of ecological restoration of stream corridors. The results are as follows : 1) For this purpose six factors were selected on considering the spatial axes of stream corridor variation and total 20 descriptors about the physical structure were selected. 2) The calculation of S.N.I. for each segment was consisted of three steps, such as calculation of S.N.I.s of the individual descriptors, averaging all the descriptors's for each factor, and finally averaging the factors's for the Total S.N.I. 3) The evaluation unit was decided to be 100m size. The score system ranging 1~5 was adopted. Weighting parameters of factors were unified with each other. 4) A GIS model was adopted for classification, calculation, querying, analysing, and presenting S.N.I. information. And the format of S.N.I. maps including statistical graphs and other spatial watershed information was designed for the GIS odel. The naturalness of stream corridor was was investigated by the naturalness of habitat, and assessed by the descriptors focused on physical structure, therefore the S.N.I. can manifest prescriptions for restoration of the stream corridor. On the other hand because some evaluation factors such as water quality, water volume, fauna, flora, functions of stream exosystem has been excluded, S.N.I. could have some limits on representing the full aspects of stream naturalness. This evaluation method is hypothetical one, so it would be investigated through iterative applicatons.

• Journal of information and communication convergence engineering
• /
• v.21 no.1
• /
• pp.90-97
• /
• 2023

Digital holographic microscopy (DHM) is a three-dimensional (3D) imaging technique that uses the phase information of coherent light. In the reconstruction process of DHM, a narrow region around the positive or negative sideband from the Fourier domain is windowed to avoid noise due to the DC spectrum of the hologram spectrum. However, the limited size of the window also degrades the high-frequency information of the 3D object profile. Although a large window can have more detailed information of the 3D object shape, the noise is increased. To solve this trade-off, we propose phase difference averaging (PDA). The proposed method yields high-frequency information of the specimen while reducing the DC noise. In this paper, we explain the reconstruction algorithm for this method and compare it to various conventional filtering methods including Gaussian, Wiener, average, median, and bilateral filtering methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.6
• /
• pp.123-134
• /
• 2013

Strengthening vehicle emission regulation is one of important policies to improve air quality in urban area. Due to the limitation of specified driving cycles for certification test to reflect real driving conditions, additional off-cycle emission regulations have been adopted in US and being developed in Europe. The driving cycles of US or Europe have been used in emission certification for Korean light-duty vehicles, but it has not been known how well the driving cycles reflect various real driving patterns in Korea. In that point of view, it is required to estimate vehicle emission based on real road driving conditions to raise the effectiveness of vehicle emission regulation in Korea. In this study, real driving emission measurements have been conducted for three Korean light-duty vehicles with PEMS. The driving routes consisted of urban, rural and motorway in Seoul and Incheon. The data have been analyzed with various averaging methods including moving averaging windows method and compared to emission limits set with emission certification modes applied to tested vehicles. The results have shown that the real driving pollutant emissions of a gasoline and a LPG vehicles have been ranged quite lower than those of emission limits on CVS-75 driving cycle. But real driving NOx of a light duty diesel vehicle has been considerably higher than emission limit of NEDC driving cycle. The higher than expected NOx emission of a diesel vehicle might be caused by different strategy to control EGR in real driving condition from NEDC driving.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.166-176
• /
• 2007

Measurement uncertainty assessment is very important in measurement and calibration. RRL provides antenna calibration services for EMI test. Reliability of EMI test depends on accurate antenna calibration. Antenna calibration results have to be accompanied with measurement uncertainty for its better reliability. In the late of 2005, CISPR issued the CISPR/A/644/C which describes the antenna calibration and measurement uncertainty. In this paper, on the basis of CISPR/A/644/C, we provide the measurement uncertainty values for dipole antenna calibration at the Calibration Test Site(CALTS) of Icheon. The antenna calibration method is 3-antenna height-scanning-averaging method, which measures the free-space antenna factor. We also considered all uncertainty sources that can affect measurement results during calibration.