• Journal of dental hygiene science
• /
• v.22 no.1
• /
• pp.57-66
• /
• 2022

Background: This study aimed to investigate the effect of selecting commercially available blending teas and applying them to bovine teeth on color change over time. Methods: After selecting healthy bovine teeth, using a cutting-disc, 105 specimens with a dimension of 5×5×3 mm were prepared, and 15 specimens were distributed to each group. Black tea was used as a positive control, water was used as a negative control, and blended tea of five types was used as an experimental group. First, pH and buffering capacity were measured with a pH meter, and tooth color was determined using a spectrophotometer before immersion in the blending tea solution and 1, 5, 7, 14, and 21 days after immersion. Thereafter, the shape change of the enamel surface was observed using a scanning electron microscope, and SPSS ver.26 was used to analyze the color change. Results: The average pH of the five blending teas in the experimental group was 3.78, and the pH of group 3 (strawberry rhubarb) was the lowest at 3.22. The pH levels of black tea and water were 5.19 and 7.30, respectively. The buffering capacity was the highest in group 3 at both pH levels of 5.5 and 7.0. The L^*a^*b^* color change according to immersion time was the largest in group 4 (rooibos yellow flower), and the amount of color change was large in black tea and group 4. As a result of observing the enamel surface of bovine teeth, changes in the surface shape were noted in all groups immersed in the experimental solution for 21 days, except for water. Conclusion: There was a significant difference between the experimental groups in terms of color change according to the immersion time, and color and enamel surface changes were observed in black tea and all experimental groups, except for water.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.469-477
• /
• 2016

To evaluate the $CO_2$ storage capacity for the reservoir rock, the laboratory scale technique to measure the amount of $scCO_2$, replacing pore water of the reservior rock after the $CO_2$ injection was developed in this study. Laboratory experiments were performed to measure the $scCO_2$ displacement efficiency of the conglomerate and the sandstone in Janggi basin, which are classified as available $CO_2$ storage rocks in Korea. The high pressurized stainless steel cell containing two different walls was designed and undisturbed rock cores acquired from the deep drilling site around Janggi basin were used for the experiments. From the lab experiments, the average $scCO_2$ displacement efficiency of the conglomerate and the sandstone in Janggi basin was measured at 31.2% and 14.4%, respectively, which can be used to evaluate the feasibility of the Janggi basin as a $scCO_2$ storage site in Korea. Assuming that the effective radius of the $CO_2$ storage formations is 250 m and the average thickness of the conglomerate and the sandstone formation under 800 m in depth is 50 m each (from data of the drilling profile and the geophysical survey), the $scCO_2$ storage capacity of the reservoir rocks around the probable $scCO_2$ injection site in Janggi basin was calculated at 264,592 metric ton, demonstrating that the conglomerate and the sandstone formations in Janggi basin have a great potential for use as a pilot scale test site for the $CO_2$ storage in Korea.

• Korean Journal of Environment and Ecology
• /
• v.26 no.2
• /
• pp.210-218
• /
• 2012

This study was carried out to analyze the vegetation properties, soil characteristics and ordination of Bletilla striata population in South Korea. The $Bletilla$ $striata$ population was classified into $Juniperus$ $rigida$ dominant population, $Rhododendron$ $yedoense$ var. $poukhanense$ dominant population, $Rhus$ $javanica$ dominant population, $Bletilla$ $striata$ typical population. $Bletilla$ $striata$ were mainly distributed along the coast of south-western regions of the Korean penninsula and it's population was located at an elevation of 4m to 40m. In the study sites, soil organic matter, total nitrogen, available phosphate, exchangeable potassium, exchangeable calcium, exchangeable magnesium, cation exchange capacity and soil pH were 2.38-6.70%, 0.09-0.27%, 1.81-6.85mg/kg, 1.08-1.72$cmol^+/kg$, 3.56-7.71$cmol^+/kg$, 1.52-3.21$cmol^+/kg$, 5.28-16.95$cmol^+/kg$ and 4.60-6.01 respectively. $Rhododendron$ $yedoense$ var. $poukhanense$ dominant population was found in the steep sloped area that has high percentage of organic matter, total nitrogen, cation exchange capacity and pH than other populations. $Rhus$ $javanica$ dominant population was found in the gentle sloped area that has less percentage of organic matter, total nitrogen, cation exchange capacity and pH. $Juniperus$ $rigida$ dominant population and $Bletilla$ $striata$ typical population were found in the medium sloped area that has medium percentage of organic matter, total nitrogen, cation exchange capacity and pH. Current status of $Bletilla$ $striata$ habitats is very vulnerable with local development constantly threatening the species' survival. Thus, concrete conservation plans to protect natural habitats should be set up as soon as possible.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.23-32
• /
• 2020

Geological CO₂ sequestration is a global warming response technology to limit atmospheric emissions by injecting CO₂ captured on a large scale into deep geological formations. The presented results concern mineralogical and hydrogeological investigations (FE-SEM, XRD, XRF, and MICP) of mudstone samples from drilling cores of the Pohang basin, which is the research area for the first demonstration-scale CO₂ storage project in Korea. They aim to identify the mineral properties of the mudstone constituting the caprock and to quantitatively evaluate the hydrogeologic sealing capacity that directly affects the stability and reliability of geological CO₂ storage. Mineralogical analysis showed that the mudstone samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, clay minerals, etc. Mercury intrusion capillary pressure analysis also showed that the samples generally had uniform particle configurations and pore distribution and there was no distinct correlation between the estimated porosity and air permeability. The allowable CO₂ column heights based on the estimated pore-entry pressures and breakthrough pressures were found to be significantly higher than the thickness of the targeting CO₂ injection layer. These results showed that the mudstone layers in the Yeongil group, Pohang basin, Korea have sufficient sealing capacity to suppress the leakage of CO₂ injected during the demonstration-scale CO₂ storage project. It should be noticed, however, that the applicability of results and analyses in this study is limited by the lack of available samples. For rigorous assessment of the sealing efficiency for geological CO₂ storage operations, significant efforts on collection and multi-aspect evaluation for core samples over entire caprock formations should be accompanied.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.2
• /
• pp.125-132
• /
• 2009

This study was carried out to investigate the distribution of native Asparagus cochinchinensis and ecological characteristic in South Korea. Natural vegetative areas were investigated at 5 areas; Taean, Buan, Geoje, Namhae and Jindo. In this study, the $5m{\times}5m$ quadrat was established for recording coverage and appearance species by phytosociological method. The flora of the studied area in native habitats were listed as 130 species. The native habitats was classified into Pinus thunbergii community and typical community. Two communities were located in a coastal cliff and have been destroyed. Therefore Asparagus cochinchinensis native habitats must be protected by regulation. In the studied sites, soil pH, organic matter, nitrogen, available phosphorus, exchangeable K, exchangeable Ca, exchangeable Mg and cation exchange capacity were ranged from $5.1{\sim}5.7%$, $1.77{\sim}3.59%$, $0.19{\sim}0.54%$, $5.4{\sim}18.7$ (mg/kg), $0.24{\sim}0.48$ (cmol+/kg) $0.76{\sim}2.83$ (cmol+/kg), $3.11{\sim}6.22$ (cmol+/kg) and $8.7{\sim}24.5$(cmol+/kg), respectively.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.307-316
• /
• 2005

This study analyzed the characteristics of four kinds of bridge rubber pads and suggested a method of determining the stiffness and the damping ratio of the pads.The stiffness of rubber pads can be estimated by a direct static test and a dynamic test indirectly.This study used both methods to determine the pad's stiffness.The damping ratio of pads can be obtained using the dynamic test and the damping ratio of polyurethane rubber pads was estimated to aproximate that of natural and chloroprene rubber pads.The polyurethane rubber pads are harder than natural and chloroprene rubber pads and thus carry larger load bearing capacity.In addition, they showed higher stiffness with the same shape factor than the others and thus are more available for bridge bearings.Although natural and chloroprene rubber pads are elongated to large deformation in the horizontal direction due to vertical loads, polyurethane rubber pads almost do not generate horizontal deformation due to vertical loads regardless of the thickness and hardness of the pads.Therefore, they do not need reinforced plate to restrict horizontal deformation.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.59-69
• /
• 2006

This paper presents test results on reduced beam section (RBS)program addressed panel zone (PZ) strength as the key variables. PZ strength has been much debated issue for several decades. A desirable range of PZ strength has not yet been proposed despite the fact that a significant amount of RBS test data is available. Test results from this study and by others showed that panel zones could easily develop a plastic rotation of 0.01 radian without causing distress to the beam flange groove welds. At this deformation level, the amount of beam distortion (i.e., buckling) was about one half that developed in strong PZ specimens. A criterion for a balanced PZ strength that improves the plastic rotation capacity while reducing the amount of beam buckling is proposed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.5
• /
• pp.329-335
• /
• 2008

Recently, super high-speed motor drives have been available due to the development of power electronics technology And they are used in various fields of industry because of their advantages. This paper describes the control algorithm for a permanent magnet synchronous motor(PMSM) drive at the speed of 118,000r/min using DSP and IGBT inverter. Hall sensors are implemented to measure the rotor position and speed, and a speed observer is used to reduce the performance deterioration caused by the low resolution of hall sensors. To enhance the output power capacity in the high-speed operating region, a flux weakening controller which also can work as an anti-wind up controller is used. Computer simulations and experiments are peformed to validate the proposed method.

• Geotechnical Engineering
• /
• v.11 no.3
• /
• pp.91-112
• /
• 1995

Drilled shafts are used increasingly as the foundations for many types of structures. However, very little knowledge of drilled shaft behavior under inclined load is available. In this study, a systematic experimental testing program was conducted to understand the undrained behavior of drilled shaft foundations under inclined loads. A semi-theoretical method of predicting the inclined capacity was developed through a parametric study of the variables such as shaft geometry and load inclination. Test parameters were chosen to be representative of those most frequently used in the electric utility industry. Short, rigid shafts with varying depth/diameter(D/B) ratios were addressed, and loading modes were investigated that includes exial uplift, inclined uplift, and inclined compression loads. Capacities were evaluated using the structural interaction formula and an equation developed from this experimental study. This new equation models the laboratory data well and is applicable for the limites field data.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.10a
• /
• pp.205-212
• /
• 1999

It is certain that EC(Electronic Commerce) applying the internet will be activated in the knowledge society of 21 century based on IT(Information Technology). Though this change of social environment helps the useful information resource available to expand, it looks like that the rapid inclease in lots of information to gather makes colleges, reseach laboratories and public institutions to spend more man power and money on work of book purchases than before and now. Therefore the most urgent part for the business process reengineering in work of information service center is the business of book purchases. The business of book purchases is the core part in organizations and facilities. It should construct the books which the organigation and facility need in the most economical and efficient way within the range of physically receptive capacity with the limited budget. These organigations and facilities have to establish the policy of the book stock which they should possess and also librarians should endeavour to configure the kernel book stock constantly. I assert that they need to ensure a specialty with the improvement of business process accompanying choosing and purchasing the books. Especially, in a case of purchasing foreign books by request of members like professors, students, researcher and so on they have to replace the business of book purchase using agency with direct dealing using EC. This Business Process Reengineering will cut down on expenses, offer the transparency of book purchases and also give the users confidence. Moreover the Business Process Reengineering make it possible to build well constructed main books and information resource. The people in charge are enabled to acquire the knowledge of subjects with contiuous search for books of a spcial area and self-study. These experts in work will raise the quality of information service. Information service center will be the core in the 21c knowledge industry. To streng then value of it, efficiently run it and control it the existing business of book purchasing should be replace with direct dealing using EC applying the internet.