• 자동차안전학회지
• /
• 제9권1호
• /
• pp.6-12
• /
• 2017

Regulation for the testing and operation of automated vehicles on public roadways has been recently developed all over the world. For example, the licensing standards and the evaluation technology for automated vehicles have been proposed in California, Nevada and EU. But specific safety evaluation scenarios for automated vehicles have not been proposed yet. This paper presents safety evaluation scenarios for extraordinary service permission of automated vehicles on highways. A total of seven scenarios are selected in consideration of safety priority and real traffic situation. Six scenarios are relevant with lane keeping and one scenario is relevant with lane change. All scenarios are developed based on existing ADAS evaluation scenarios and repeated simulation of automated vehicle algorithm. Safety evaluation factors as well as scenarios are developed. The safety factors are based on existing ADAS ISO requirements, ADAS safety factors and current traffic regulations. For the scenarios, a hunter vehicle is needed in addition to automated vehicle evaluated. The hunter vehicle performs multiple roles like preceding vehicle, cut-in vehicle and so on. The hunter vehicle is also automated vehicle equipped with high performance GPS, radar and Lidar. All the scenarios can be implemented by driving a lap on a KATRI ITS test track. These scenarios and safety evaluation factors are investigated via both a computer simulation and an experimental vehicle test on the test track. The experimental vehicle test was conducted with two automated vehicles, which are the evaluated vehicle and the hunter vehicle.

• 한국산업융합학회 논문집
• /
• 제22권1호
• /
• pp.21-28
• /
• 2019

As the automated vehicle system evolves, electronic devices and control software installed in vehicles are increasing. Therefore, automated vehicle electrical and electronic system (E/E system) design for ensure system integration, software modularization, system reusability, and scalability at the design stage of the automated vehicle is actively studied. This paper introduces a design methodology for automated vehicle E/E systems that employs by using cyber-physical systems (CPS). An automated forklift system was designed to examine the effectiveness of the proposed methodology. This paper showed that the proposed CPS design methodology enables an effective development of automated E/E control systems. Compare to existing design methodologies, it provides higher reusability of individual modules and an easier way to integrate control system elements such as controllers, sensors, and actuators.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.114-122
• /
• 2021

In this paper, an automated vehicle intersection collision accident was analyzed through simulation. Recently, the more automated vehicles are distributed, the more accidents related to automated vehicles occur. Accidents may show different trends depending on the sensor characteristics of the automated vehicle and the performance of the accident prevention system. Based on NASS-CDS (National Automotive Sampling System-Crashworthiness Data System) and TAAS (Traffic Accident Analysis System), four scenarios are derived and simulations are performed. Automated vehicles are applied with a virtual system consisting of an autonomous emergency braking system and algorithms that predict the route and avoid collisions. The simulations are conducted by changing the sensor angle, vehicle speed, the range of the sensor and vehicle speed range. A range of variables considered vehicle collision were derived from the simulation.

• 자동차안전학회지
• /
• 제8권4호
• /
• pp.31-37
• /
• 2016

Since real road experiments have many restrictions, a multi-vehicle traffic simulator can be an effective tool to develop and evaluate fully automated driving systems. This paper presents multi-vehicle environment simulation tool to develop and evaluate motorway automated driving systems. The proposed simulation tool consists of following two main parts: surrounding vehicle model and environment sensor model. The surrounding vehicle model is designed to quickly generate rational complex traffic situations of motorway. The environment sensor model depicts uncertainty of environment sensor. As a result, various traffic situations with uncertainty of environment sensor can be proposed by the multi-vehicle environment simulation tool. An application to automated driving system has been conducted. A lane changing algorithm is evaluated by performance indexes from the multi-vehicle environment simulation tool.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.71-78
• /
• 2023

This study presents the direction of data triggers and elements to be recorded in automated vehicles in the future in relation to the event data recorder (EDR) and data storage system for automated driving (DSSAD). It does not distinguish between the EDR and DSSAD, but suggests data triggers and elements in preparation for overall automated vehicle accidents and dangerous situations. To propose, the current status of discussions on EDR/DSSAD internationally and the case of investigating accidents with automated vehicles under temporary driving licenses in Korea were analyzed. Based on the analysis, the direction of data triggers and elements of the EDR/DSSAD of automated vehicles were presented.

• 대한교통학회지
• /
• 제35권4호
• /
• pp.332-347
• /
• 2017

자율주행기술이 교통류에 미치는 영향을 분석하기 위해서는 자율차와 비자율차 간의 상호작용을 분석하는 것이 중요한 이슈이다. 특히 자율주행기술을 활용한 유용한 서비스 중의 하나인 군집주행은 주변의 비자율 차량의 주행행태에 영향을 미칠 수 있다. 본 연구의 목적은 군집주행 환경에서 비자율차의 차로변경행태 분석하는 것이며, 3단계의 실험 및 조사를 수행하였다. 1단계 영상기반 인지특성 분석을 통해 군집주행 환경에서 어떠한 반응행태를 보일 것인지를 조사하였으며, 2단계 주행시뮬레이션 실험을 통해 비자율차의 차로변경행태를 분석하였다. 차로변경행태를 분석하기 위해 차로변경시간과 교통류의 안전성을 나타낼 수 있는 지표인 가속소음을 이용하였으며, 자율차의 시스템 보급률(Market Penetration Rate, MPR)과 피실험자 인적요소에 따른 비자율차의 주행행태 차이를 비교 분석하였다. 마지막 단계인 NASA-TLX(NASA Task Load Index)를 통해 비자율차 운전자의 작업부하를 평가하였다. 분석결과 군집차량군 주변의 비자율차 운전자는 심리적인 부담감을 느끼며, MPR이 증가할수록 차로변경시간이 길어지고 30-40대 운전자 또는 여성 운전자의 경우 안전성이 낮아지는 것으로 나타났다. 본 연구에서 도출된 결과는 자율차와 비자율차의 상호작용을 반영한 보다 현실성 높은 교통시뮬레이션 실험 시 기초자료로 활용될 수 있고, 이를 기반으로 자율협력주행 환경에서 적용 가능한 교통운영관리전략 수립을 효과적으로 지원할 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1287-1296
• /
• 2014

This paper is about control of Automated Guided Vehicle for path following using fuzzy logic controller. The Automated Guided Vehicle is a tricycle wheeled mobile robot with three wheels, two fixed passive wheels and one steering driving wheel. First, kinematic and dynamic modeling for Automated Guided Vehicle is presented. Second, a controller that integrates two control loops, kinematic control loop and dynamic control loop, is designed for Automated Guided Vehicle to follow an unknown path. The kinematic control loop based on Fuzzy logic framework and the dynamic control loop based on two PID controllers are proposed. Simulation and experimental results are presented to show the effectiveness of the proposed controllers.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.317-323
• /
• 2006

본 시험의 목적은 컨테이너터미널의 생산성을 향상시키기 위해서 기술개발 추진 중인 컨테이너 자기하역차량(ALV:Automated Lifting Vehicle)의 핵심 기술개발 요소 중 하나인 주행구동장치 (Gantry Travel Mechanism) 시제품을 제작하여, 무부하 및 부하 조건에서 각종 Test와 한계하중 실험 과정을 통하여 설게 Data의 확인과 상세 제작도면의 오류를 사전에 발견하여 최종 제작도면에 수정 반영함으로써 보다 완벽한 장비를 개발하는 것을 목적으로 한다.

• 제어로봇시스템학회논문지
• /
• 제21권3호
• /
• pp.194-198
• /
• 2015

In this paper, a remote emergency stop system to improve the safety of an automated driving vehicle is proposed. One of the most serious problems of the previous wireless remote emergency system is that it does not work when the wireless channel is damaged in case of an emergency because it is composed of a single communication channel. Therefore, the proposed remote emergency stop system composed of a portable wireless remote system and a stationary wireless remote system is designed and the remote emergency stop system for automated driving vehicles is developed. By applying it to an automated driving vehicle to check it's performance, the wireless remote system is tested. Emergency stops using the portable wireless remote system is tested when the stationary wireless remote system is disconnected. Also, emergency stops using the stationary wireless remote system are tested when the portable wireless remote system is disconnected. The results of the emergency stop test show a satisfactory performance.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.61-69
• /
• 2020

As a sales volume of autonomous vehicle continually grows up, regulations on this new technology are being introduced around the world. For example, safety standards for the Level 3 automated driving system was promulgated in December 2019 by the Ministry of Land, Infrastructure and Transport of Korean government. In order to promote the development of autonomous vehicle technology and ensure its safety simultaneously, the regulations on the automated driving systems should be phased in to keep pace with technology progress and market expansion. However, according to SAE J3016, which is well known to classify the level of the autonomous vehicle technologies, the description for classification is rather abstract. Therefore it is necessary to describe the automated driving system in more detail in terms of the 'Level.' In this study, the functions and characteristics of automated driving system are carefully classified at each level based on the commentary in the Informal Working Group (IWG) of the UN WP29. In particular, regarding the Level 4, technical issues are characterized with respect to vehicle tasks, driver tasks, system performance and regulations. The important features of the autonomous vehicles to meet Level 4 are explored on the viewpoints of driver replacement, emergency response and connected driving performance.