• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.400-405
• /
• 2011

ZnO nanotube arrays were synthesized by a two-step process: electrodeposition and selective dissolution. In the first step, ZnO nanorod arrays were grown on an Au/Si substrate by using a homemade electrodeposition system. ZnO nanorod arrays were then selectively dissolved in an etching solution composed of 0.125 M NaOH, resulting in hollow ZnO nanotube arrays. It is suggested that the formation mechanism of the ZnO nanotube arrays might be attributed to the preferred surface adsorption of hydroxide ion ($OH^{-1}$) on a positive polar surface followed by selective dissolution of the metastable Zn-terminated ZnO (0001) polar surface caused by the difference in the surface energy per unit area between the ZnO nanorod and nanotube.

• 한국표면공학회지
• /
• 제45권5호
• /
• pp.193-197
• /
• 2012

The influence of annealing process in an $O_2$ atmosphere on the photoluminescence (PL) spectra properties of ZnS nanowires has been investigated. ZnS nanowires with the diameters approximately 100 nm and the lengths a few tens micrometers were synthesized by evaporating ZnS powders on Si substrates while using an Au thin film as a catalyst. ZnS nanowires had an NBE emission band at 430 nm in the violet region. The emission intensity was improved drastically by a process in which ZnS nanowires were heat-treated at $500^{\circ}C$ in an $O_2$ atmosphere for 45 minutes.

• 한국표면공학회지
• /
• 제41권1호
• /
• pp.12-15
• /
• 2008

The zinc oxide(ZnO) nanowires were deposited on Si(001) substrates by thermal chemical vapour deposition without any catalysts. SEM data suggested that the grown nanostructures were the well-aligned ZnO single crystals with preferential orientation. Back-gate ZnO nanowire field effect transistors(FET) were successfully fabricated using a photolithography process. The fabricated nanowire FET exhibits good contact between the ZnO nonowire and Au metal electrodes. Based on I-V characteristics it was found out that the ZnO nanowire revealed a characteristic of n-type field effect transistor. The drain current increases with increasing drain voltage, and the slopes of the $I_{ds}-V_{ds}$ curves are dependent on the gate voltage.

• 자원환경지질
• /
• 제44권5호
• /
• pp.359-372
• /
• 2011

통가열도의 남단에 위치하는 TA26 해저산은 열수활동이 가장 활발한 것으로 알려진 해저산으로 열수플룸이 광범위하게 존재하며 열수광석 및 열수변질암이 채취된 지역이다. 이 지역에서 채취한 암석들은 현무암내지 현무암질 안산암이다. 열수용액에 의한 변질암석시료에서는 사장석, 휘석류, 황철석, 티탄철석, 비결정질 살리카, 중정석, 녹점토, iron sulfates, Fe-Si sulfates 및 Fe silicates 등이 산출된다. 모암변질시 열수작용에 의한 변질 암석의 주원소, 미량원소 및 희토류원소 이득 및 손실을 계산하면, $K_2O$(+0.04~+0.45 g), $SiO_2$(-6.52~+10.56 g), $H_2O$(-0.03~+6.04 g), $SO_4$(-0.46~+17.54 g), S(-0.46~+13.45 g) 및 총 S(-0.51~+16.93 g)들이 모암변질시 이득되었다. 또한 미량원소들 중 특히 Ba(-7.60~+185078.62 g), Sr(-36.18~+3033.08 g), Ag(+54.83 g), Au(+1467.49 g), As(-5.80~+1030.80 g), Cd(+249.78 g), Cu(-100.57~+1357.85 g), Pb(+4.91~+532.65 g), Sb(-0.32~+66.59 g), V(-113.58~+102.94 g), 및 Zn(-49.56~+14989.92 g)들이 모암변질시 이득되었다. 따라서 이득된 주원소 및 미량원소의 종류 및 함량($K_2O$, $H_2O$, $SO_4$, S, 총 S, Ba, Sr, Ag, Au, As, Cd, Cu, Pb, Sb, V, Zn) 등을 지시원소로서 활용하면 통가열도 심해저 열수광상 탐사시 유용하게 이용될 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.197.2-197.2
• /
• 2015

Low-cost, high efficiency solar cells are tremendous interests for the realization of a renewable and clean energy source. ZnTe based solar cells have a possibility of high efficiency with formation of an intermediated energy band structure by impurity doping. In this work, the ZnTe:O/CdS/ZnO structure was fabricated by pulsed laser deposition (PLD) technique. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnTe target, whose density of laser energy was 4.5 J/cm2. The base pressure of the chamber was kept at a pressure of approximately $4{\times}10-7Torr$. ZnO thin film with thickness of 100 nm was grown on to ITO/glass, and then CdS and ZnTe:O thin film were grown on ZnO thin film. Thickness of CdS and ZnTe:O were 50 nm and 500 nm, respectively. During deposition of ZnTe:O films, O2 gas was introduced from 1 to 20 mTorr. For fabricating ZnTe:O/CdS/ZnO solar cells, Au metal was deposited on the ITO film and ZnTe:O by thermal evaporation method. From the fabricated ZnTe:O/CdS/ZnO solar cell, current-voltage characteristics was measured by using HP 4156-a semiconductor parameter analyzer. Finally, solar cell performance was measured using an Air Mass 1.5 Global (AM 1.5 G) solar simulator with an irradiation intensity of 100 mW cm-2.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.250-250
• /
• 2011

Zinc oxide (ZnO) structures have great potential in many applications. Currently, the most commonly used method to grow ZnO nanostructres are the vapor transport method (VPT). The morphology of the ZnO structures largely related to the growth conditions, including growth temperature, distance between the substrate and source, and gas ambient. Previously ZnO nanosturecutres with high crystallinity were obtained at the growth temperature of 800$^{\circ}C$, in the argon and oxygen gas ambient. In this study, we report the properties of the ZnO nanostructures, which were synthesized on Au-catalyzed Si substrate by VPT, using a mixture of ZnO and graphite powders as source material under the different condition, including gas ratio of argon/oxygen and distance between substrate and source at the growth temperature of 800$^{\circ}C$. The structural and optical properties of the ZnO nanostructures were investigated by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and photoluminescence (PL).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.338.2-338.2
• /
• 2014

투명반도체산화물은 우수한 광학적, 전기적 특성을 가지고 있기 때문에 차세대 박막트랜지스터의 채널층으로 각광을 받고 있다. 특히, 그 중에서도 a-IGZO를 이용한 TFT는 높은 가시광선 투과율(>80%)과 큰 전하이동도(>10 cm2/Vs) 를 갖는 등 좋은 광학적, 전기적 특성을 갖기 때문에 많은 연구가 이루어졌다. 여러 연구들에 의하면, a-IGZO TFT는 소스/드레인의 전극으로 어떤 물질을 사용하는지에 따라서 동작특성에 큰 영향을 미치는 것으로 알려져 있다. 일반적으로, a-IGZO 박막은 n형 반도체로써 일함수가 작은 금속과는 ohmic contact를 형성하고, 일함수가 큰 금속과는 Schottky barrier를 형성한다고 알려져 있다. 이와 관련된 대부분의 이전의 연구들에서는 각각의 전극물질에 따라 전기적인 특성변화에 초점을 맞춰서 연구하였다. 본 연구에서는 일함수가 작은 Ag와 일함수가 큰 Au를 a-IGZO의 박막 위에 얇게 증착하면서 이에 따른 고분해능 광전자분광(high-resolution x-ray photoelectron spectroscopy) 정보의 변화를 분석함으로써, 금속의 증착에 따른 금속층과 a-IGZO 표면 및 계면에서의 화학적 상태의 변화를 연구하였다. Au 4f, Ag 3d는 metallic property를 나타내기 이전까지는 lower binding energy(BE) 쪽으로 shift하였으며, In 3d 또한 lower BE 성분이 크게 증가하였다. O 1s, Ga 3d, Zn 3d들은 상대적으로 적은 변화를 나타내었는데, 이는 Ag, Au가 In과 상대적으로 더 많이 상호작용한다는 것을 의미한다. 본 발표에서는 이들 core level의 정보들과, 가전자대의 분광정보, 그리고 band bending의 정보가 제시될 것이며, 이 정보들은 metal 증착에 따른 contact 특성을 이해하는데 기여할 것으로 기대한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.415-415
• /
• 2012

ZnO nanostructures were synthesized by a vapor phase transport process in a single-zone furnace within a horizontal quartz tube with an inner diameter of 38 mm and a length of 485 mm. The ZnO nanostructures were grown on Au-catalyzed Si(100) substrates by using a mixture of zinc oxide and graphite powders. The growth of ZnO nanostructures was conducted at $800^{\circ}C$ for 30 min. High-purity Ar and $O_2$ gases were pushed through the quartz tube during the process at a flow rate of 100 and 10 sccm, respectively. The sequence of ON/OFF cycles of the Ar gas flow was repeated, while the $O_2$ flow is kept constant during the growth time. The Ar gas flow was ON for 1 min/cycle and that was OFF for 2 min/cycle. The structure and optical properties of the ZnO nanostructures were investigated by field-emission scanning electron microscope, X-ray diffraction, temperature-dependent photoluminescence. The preferred orientation of the ZnO nanostructures was along c-axis with hexagonal wurtzite structure.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.247.1-247.1
• /
• 2016

Low-cost, high efficiency solar cells are tremendous interests for the realization of a renewable and clean energy source. ZnTe based solar cells have a possibility of high efficiency with formation of an intermediated energy band structure by impurity doping. In this work, ZnO/ZnTe:Cr and ZnO/i-ZnTe structures were fabricated by pulsed laser deposition (PLD) technique. A pulsed (10 Hz) Nd:YAG laser operating at a wavelength of 266 nm was used to produce a plasma plume from an ablated a ZnTe target, whose density of laser energy was 10 J/cm2. The base pressure of the chamber was kept at approximately $4{\times}10-7Torr$. ZnTe:Cr and i-ZnTe thin films with thickness of 210 nm were grown on p-Si substrate, respectively, and then ZnO thin films with thickness of 150 nm were grown on ZnTe:Cr layer under oxygen partial pressure of 3 mTorr. Growth temperature of all the films was set to $250^{\circ}C$. For fabricating ZnO/i-ZnTe and ZnO/ZnTe:Cr solar cells, indium metal and Ti/Au grid patterns were deposited on back and front side of the solar cells by using thermal evaporator, respectively. From the fabricated ZnO/ZnTe:Cr and ZnO/i-ZnTe solar cell, dark currents were measured by using Keithley 2600. Solar cell parameters were obtained under Air Mass 1.5 Global solar simulator with an irradiation intensity of 100 mW/cm2, and then the photoelectric conversion efficiency values of ZnO/ZnTe:Cr and ZnO/i-ZnTe solar cells were measured at 1.5 % and 0.3 %, respectively.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.406-410
• /
• 2011

ZnO nanorods were prepared by the electrodeposition route on conductive Au/Si substrates. The effects of deposition time on the microstructural evolution and optical properties of ZnO nanorods were investigated. With increasing deposition time from 1 h to 20 h, the diameter and length of the ZnO nanorods increased gradually to about 328 nm and 6.55${\mu}m$, respectively. The ZnO nanorods were dense and vertically well-aligned. The photoluminescence (PL) peaks corresponding to the near band edge of ZnO were observed. With increasing deposition time, the intensity of PL peaks increased with nanorod growth up to 4 h and then decreased. This might be due to the degradation of crystal quality caused by merging of nanorods.