• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권3호
• /
• pp.111-114
• /
• 2002

Using the plasma that we developed to generate a low-temperature plasma at atmospheric pressure, we have investigated the etching possibility of an air-exposed zinc oxide(ZnO) thin films. Hydrogen and methane radicals generated from the plasma were observed and their intensity was found to be dependent on the isomer of butyl acetate by an analysis with optical emission spectrosxopy. The etching ability of this plasma was evaluated by an emission intensity, etching time, rf power.

• 한국환경과학회지
• /
• 제21권9호
• /
• pp.1097-1113
• /
• 2012

Ozone is the secondary photochemical pollutant formed from ozone precursor such as nitrogen dioxide and non-methane volatile organic compounds(VOCs). The ambient concentration of ozone depends on several factors: sunshine intensity, atmospheric convection, the height of the thermal inversion layer, concentrations of nitrogen oxides and VOCs. Busan is located in the southeast coastal area of Korea so the ozone concentration of Busan is mainly affected from the meteorological variables related to the sea such as sea breeze. In this study the ozone concentrations of Busan in 2008~2010 were used to analyse the cause of the regional ozone difference in eastern area of Busan. The average ozone concentration of Youngsuri was highest in Busan however the average ozone concentration of Gijang was equal to the average ozone concentration of Busan in 2008~2010. The two sites are located in eastern area of Busan but the distance of two sites is only 9km. To find the reason for the difference of ozone concentration between Youngsuri and Gijang, the meteorological variables in two sites were analyzed. For the analysis of meteorological variables the atmospheric numerical model WRF(Weather Research and Forecasting) was used at the day of the maximum and minimum difference in the ozone concentration at the two sites. As a result of analysis, when the boundary layer height was lower and the sea breeze was weaker in Youngsuri, the ozone concentration of Youngsuri was high. Furthermore when the sea breeze blew from the south in the eastern area of Busan, the sea breeze at Youngsuri turned into the southeast and the intensity of sea breeze was weaker because of the mountain in the southern region of Youngsuri. In that case, the difference of ozone concentration between Youngsuri and Gijang was considerable.

• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.979-987
• /
• 2005

Numerical simulations were performed at atmospheric pressure in order to understand the effect of additives on flame speed, flame temperature, radical concentrations, $NO_x$ formation, and heat flux in freely propagating $CH_4-Air$ flames. The additives were both carbon dioxide and hydrogen chloride which had a combination of physical and chemical behavior on hydrocarbon flame. In the flame established with the same mole of methane and additive, hydrogen chloride significantly contributed toward the reduction of flame speed, flame temperature, $NO_x$ formation and heat flux by the chemical effect, whereas carbon dioxide mainly did so by the physical effect. The impact of hydrogen chloride on the decrease of the radical concentration was about $1.4\~3.0$ times as large as that of carbon dioxide. Hydrogen chloride had higher effect on the reduction of $EI_{NO}$ than carbon dioxide because of the chemical effect of hydrogen chloride. The reaction, $OH+HCl{\rightarrow}Cl+H_2O$, played an important role in the heat flux from flames added by hydrogen chloride instead of the reaction, $OH+H_2{\rightarrow}H+H_2O$ which was an important reaction in hydrocarbon flames.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권9호
• /
• pp.1229-1235
• /
• 2010

With the increase of human activities since the Industrial Revolution, atmospheric greenhouse gas (GHG) concentration has increased, which is believed the cause of climate change. Methane ($CH_4$) fluxes were measured at two commercial swine barns (Jarvis and Guelph) with a four tower micrometeorological mass balance method. Two and three separate measurements were conducted at Jarvis and at Guelph, respectively. In the Jarvis experiments from May to July, mean $CH_4$ flux ($490.4{\mu}g/m^2/s$) during daytime was lower than that during nighttime ($678.0{\mu}g/m^2/s$) (p<0.05), which would be caused by break of slurry temperature stratification. In the Guelph experiment from January to April, mean $CH_4$ flux ($62.9{\mu}g/m^2/s$) during daytime was higher than that during nighttime ($39.0{\mu}g/m^2/s$) (p<0.05), which would be generated by high slurry temperature at 3 cm depth after April 6. Slurry temperature stratification in the Guelph experiment would happen from January to March.

• 에너지공학
• /
• 제12권2호
• /
• pp.145-153
• /
• 2003

석탄이용 무공해 발전공정의 핵심기술인 탄화공정을 개발하기 위하여, 본 공정의 주반응인 메탄 수증기 개질에 대한 특성을 조사하였다. 개질촉매를 이용한 메탄수증기 개질에서는 공간속도, 수증기/탄소-비, 압력에 대한 영향을 조사하였다. 공간속도 7,000$hr^{-1}$ 이하에서 평형 전화율을 얻었다. 혼성반응으로 구성된 탄화공정 중 메탄 수증기 개질 반응조건인 700~80$0^{\circ}C$, 수증기/탄소-비 2.5~3에서 생성물 조성분포는 상압에서 수소 75~78%, 이산화탄소 8~10%, 1~30기압에서 수소 60~78%, 이산화탄소 9~11%를 얻었다.

• 환경영향평가
• /
• 제13권4호
• /
• pp.187-196
• /
• 2004

매립지에서 배출되는 메탄가스는 이산화탄소에 이어 두 번째로 많이 배출되는 지구온난화 가스이지만 열을 흡수하는 능력에 있어서는 이산화탄소 보다 25에서 35배 정도 더 크기 때문에 지구 온난화 현상에 대한 메탄가스의 영향은 중요하다고 할 수 있다. 매립지로부터 배출되는 메탄가스는 호기성 상태의 매립지 복토층을 통과 할 때 산화될 수 있으므로 매립지 복토층은 메탄가스의 배출을 저감시키는 바이오필터의 역할을 할 수 있다. 본 연구에서는 batch 실험을 통하여 매립지 복토층에서의 메탄산화속도에 대한 토양수분과 온도의 영향을 연구하였다. 최대 산화속도는 토양수분 15%(w/w), 배양온도 $35^{\circ}C$의 환경조건에서 $1.03{\mu}mol\;CH_4g^{-1}soil\;h^{-1}$으로 나타났다. 이러한 실험결과를 이용하여 토양수분과 온도를 함수로 하는 회귀모형을 개발하였다. 또한 전국에 4 군데 지역을 선발하여 각 지역의 토양수분과 온도 데이타를 수집하고 개발된 모형을 이용하여 각 지역에 위치하고 있는 매립장에서의 월 평균 메탄산화량을 예측하였다. 예측 결과 환경조건이 양호한 지역의 매립지 복토는 메탄의 배출량을 저감시킬 수 있는 효율적인 바이오필터의 효과를 가지지만 환경조건이 불리한 지역의 매립지 복토에서는 바이오필터의 효과가 크지 않는다고 할 수 있다.

• 대한안전경영과학회지
• /
• 제25권1호
• /
• pp.51-58
• /
• 2023

Determination of explosion reference pressure is important in designing and testing flameproof enclosures (Ex d). Although relative humidity affects to explosion pressure, its effect is not well investigated for the gas group IIB, IIA, and I. This study tested explosion pressure for Ethylene (8 vol.%), Propane (4.6 vol.%), and Methane (9.8 vol.%), which are the representative gas of the gas group IIB, IIA, and I, at ambient temperature and atmospheric pressure (1 atm) under different relative humidity (0% ~ 80%). Ethylene- and Propane-air mixed gases generally tended to decrease as the relative humidity increased; however, explosion pressure was largely dropped at 20% of relative humidity compared to 0% and 10% of relative humidity. On the other hand, Methane-air mixture gas showed similar pressures at 0% and 10% of relative humidity; but no explosion occurred at more than 20%. The results of this study can be used in setting a testing protocol of explosion reference pressure for designing and testing a flameproof enclosure.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4204-4212
• /
• 2023

Background: Storage reservoirs of radioactive waste could be the source of atmospheric pollution due to the efflux of aqueous aerosol from their water areas. The main mechanism of formation of aqueous aerosols is the collapse of gas bubbles at the water surface. In this paper, we discuss the potential influence of biological factors on gas ebullition in the water areas of the radioactively contaminated industrial reservoirs R-9 (Lake Karachay) and R-4 (Metlinsky pond) of the Mayak PA. The emission of the released non-dissolved gases captured with gas traps in reservoir R-9 was (88-290) ml/m² per day (2015) and in reservoir R-4 (270-460) ml/m² per day (2016). The analysis of gas composition in reservoir R-4 (60% methane, 35% nitrogen, 2.4% oxygen, 1.5% carbon dioxide) confirms their biological origin. It is associated with the processes of organic matter destruction in bottom sediments. The major source of organic matter in bottom sediments is the dying phytoplankton developing in these reservoirs. Conclusion: The obtained results form the basis to set a task to quantify the relationship between the phytoplankton development, gases ebullition and radioactive atmosphere contamination.

• 공업화학
• /
• 제18권1호
• /
• pp.94-97
• /
• 2007

대기압 조건에서 고정층 상압 유통식 반응기를 사용하여 Pd(5)/SPK 촉매상에서 산소의 몰 비 변화에 따른 메탄의 열분해 반응으로부터 탄소 나노튜브 및 탄소 나노선을 제조하였으며, SEM과 TEM을 이용하여 분석하였다. $CH_4/O_2$의 몰 비가 1인 경우, 촉매층 지지대 표면상에 탄소가 거의 침적되지 않았으나, $CH_4/O_2$의 몰 비가 2인 경우에는 촉매층 지지대 표면상에 반응기를 봉쇄할 정도로 다량의 탄소가 침적되었다. 침적된 탄소를 SEM과 TEM을 통하여 분석한 결과 많은 수의 단일 벽 탄소 나노튜브와 탄소 나노선들이 만들어졌음을 확인할 수 있었다. 촉매 표면상에 침적된 탄소 나노튜브의 생성 메카니즘은 첨단성장방식이었고, 촉매 지지대 표면상에 만들어진 탄소 나노튜브 및 나노선들의 생성은 일정한 탄소 성장속도 벡터와 탄소 나노선의 링구조의 핵형성이 중요한 역할을 하였다. SPK 촉매 담체는 열 안정성이 우수하였으며, $N_2$ 흡착등온선은 중기공 세공이 잘 발달된 IV형이었다.

• 한국추진공학회지
• /
• 제26권2호
• /
• pp.60-71
• /
• 2022

최근 발사체 시장의 저비용·재사용 발사체 개발 움직임은 여러 방향으로 세분화되고 있으며, 그중 하나는 가변추력 엔진 개발이다. 또한, 우주 선진국들은 그 청정성 때문에 차세대 우주발사체 추진제로 메탄을 선택하여 연구개발을 진행하고 있다. 본 연구에서는 이에 기체메탄과 액체산소를 추진제로 사용하는 가변추력 핀틀 분사기를 개발했고, 고압 수류시험과 고압 연소시험을 통해 분무 및 연소 특성을 분석했다. 개발된 가변추력 핀틀 분사기는 이중 슬리브 구조를 가졌으며, 반복적인 상압수류, 고압수류 및 연소시험에서 기밀성과 작동성 등에 문제없음을 확인할 수 있었다. 그러나 목표했던 추력 조절 범위는 연소시험에서 달성치 못하는 등 설계상의 문제점이 발견되어 보완이 필요하다.