• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.337-340
• /
• 2003

This paper presented practical details about control-loop design and dynamic analysis for a peak current-mode controlled asymmetrical half-bridge(ASHB) do-to-dc converter, Graphical loop gain method is used to design the feedback compensation and analyze the closed-loop performance of ASHB converter. The results of the control design and closed-loop analysis are validated by experiments on a prototype converter.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.58-61
• /
• 2003

In this paper, resonant Characteristics of the soft switched asymmetrical half bridge converter is analysis. The operation principle for proposed converter is explained in steady state and its circuit is analyzed by means of equivalent circuit. Experimental results carried out on a system prototype are included in this paper.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1067-1070
• /
• 1992

Optimal Asymmetrical Pulse-width Modulated (APWM) technique for ac chopper is proposed which can improve the input power factor and eliminate the harmonics of output voltage up to a specified order, and also enables linear control of the fundamental component of the output voltage. The PWM switching patterns at the specified phase angle are obtained by Newton-Raphson method and theoretical comparisons are made with other PWM and APWM technique.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.131-133
• /
• 2006

A high efficiency half bridge converter for PDP in whole operation load range is proposed in this paper. The ZVS(Zero Voltage Switching) in whole load range and high efficiency in low load range is achieved because the proposed converter is switched by fixed frequency asymmetrical duty ratio and resonant operation.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.418-420
• /
• 1990

New asymmetrical PWM AC Chopper is proposed, which can improve the input power factor and can reduce harmonic contents at both its input and load sides. The switching scheme for the proposed technique is presented and the theoretical characteristics of AC voltage regulator controlled by APWM AC chopper are investigated through the digital simulation

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.1-6
• /
• 2003

We propose a mathematical model to analyze the performance of TD-CDMA/TDD systems in terms of call blocking probability and then find the optimum time-slot switching-point at the smallest call blocking probability considering asymmetrical traffic load distribution for various kinds of service applications.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1157-1159
• /
• 2003

In this paper, resonant characteristics of the asymmetrical soft switching half bridge converter is analyzed. The operation principle for proposed converter is explained in steady-state and its operation characteristics by switching frequency is presented with experimental result. Experimental results carried out on a system prototype are included in this paper.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1184-1186
• /
• 2003

In this paper, a charge controlled asymmetrical half-bridge (ASHB) dc-to-dc converter is presented. For ASHB do-to-dc converter, the peak current-mode control was found to be problematic primarily due to the oscillatory behavior of the current feedback signal. To resolve this problem, a charge control method is applied to the ASHB do-to-dc converter. A 50W prototype ASHB dc-to-dc converter was built, and successfully tested.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.510-513
• /
• 2001

In this paper, an application of asymmetrical duty control method to a boost input type active clamp DC-DC converter is discussed. In order to verify the discussed results, a 50W prototype converter is built and is tested. Through the experimental results an asymmetrical controlled boost input type active clamp converter is validated.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.700-702
• /
• 2004

모자이크는 설러 장의 영상을 하나의 큰 영상으로 만드는 것을 말한다. 본 논문은 asymmetrical closing이라고 불리는 모폴로지에 의한 closing operator를 사용한 영상 모자이크에 관한 연구이다. asymmetrical closing을 하기 위한 structuring element를 소개하고 이것을 이용한 코너 정 추출 방법 및 local maxima에 대해서도 소개한다. 여러 개의 코너 정들 중 조건을 만족하는 tie point들을 이용하여 Perspective 변환 파라미터를 추출하여 최종 모자이크 결과 영상을 생성하게 된다.