• Korean Journal of Veterinary Research
• /
• v.42 no.1
• /
• pp.89-100
• /
• 2002

The nonstructural glycoprotein NSP4, encoded by the 10th gene of rotavirus, has been known to play important roles in viral assembly and pathogenesis. The NSP4 genes of human rotavirus Korean isolates, designated as CBNU/HR-1, CBNU/HR-2, CBNU/HR-3, and CBNU/HR-4, were cloned, sequenced and characterized. Also, the NSP4 gene of the CBNU/HR-1 was expressed in a baculovirus-insect cell system. The sequence data indicated that the NSP4 genes of human rotavirus Korean isolates were 750 or 751 bases in length and encoded one open reading frame of 175 amino acids. Two glycosylation sites were recognized in the NSP4 gene of human rotavirus isolates tested. The NSP4 of CBNU/HR-1, CBNU/HR-3, and CBNU/HR-4 exhibited a high degree of amino acid sequence homology with that of NSP4 genotype B viruses, but a low degree of amino acid sequence homology with that of NSP4 genotype A viruses. However, the NSP4 of CBNU/HR-2 exhibited a high degree of amino acid sequence homology with that of NSP4 genotype A viruses, but a low degree of amino acid sequence homology with that of NSP4 genotype B viruses. The Sf9 cells infected with recombinant baculovirus, inserted with NSP4 gene of CBNU/HR-1, produced specific cytopathic effects and the expressed NSP4 was detected by immunofluorescence staining using NSP4-specific monoclonal antibody(MAb). The expressed NSP4 migrated at 16-26 kDa on SDS-PAGE and reacted with NSP4-specific MAb by Western blotting.

• Korean Journal of Materials Research
• /
• v.22 no.7
• /
• pp.379-383
• /
• 2012

$TiO_2$ thin films consisting of positively charged poly(diallyldimethylammonium chloride)(PDDA) and negatively charged titanium(IV) bis(ammonium lactato) dihydroxide(TALH) were successfully fabricated on glass beads by a layer-by-layer(LBL) self-assembly method. The glass beads used here showed a positive charge in an acid range and negative charge in an alkaline range. The glass beads coated with the coating sequence of(PDDA/TALH)n showed a change in the surface morphology as a function of the number of bilayers. When the number of bilayers(n) of the(PDDA/TALH) thin film was 20, Ti element was observed on the surface of the coated glass beads. The thin films coated onto the glass beads had a main peak of the (101) crystal face and were highly crystallized with XRD diffraction peaks of anatase-type $TiO_2$ according to an XRD analysis. In addition, the $TiO_2$ thin films showed photocatalytic properties such that they could decompose a methyl orange solution under illumination with UV light. As the number of bilayers of the(PDDA/TALH) thin film increased, the photocatalytic property of the $TiO_2$-coated glass beads increased with the increase in the thin film thickness. The surface morphologies and optical properties of glass beads coated with $TiO_2$ thin films with different coating numbers were measured by field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD) and by UV-Vis spectrophotometry(UV-vis).

• Journal of Oriental Neuropsychiatry
• /
• v.25 no.4
• /
• pp.333-350
• /
• 2014

Objectives: The purpose of this study was to research learning based on brain science and the learning methodology of Korean Medicine according to disparity of age. Through this, the study aimed to provide a guideline to related Korean Medicine treatments as well as the common nurturing/educational institutions. Methods: All journals and dissertations on brain science based learning methods studied in Korea to date that could be found in the National Assembly Library and the RISS were implemented in the analysis. The terminology used for search was as follows: 1st search, 'Brain'; 2nd search, 'Learning', 'Education'; 3rd search, 'Baby, 'Infant', 'Child'. For the learning methodology of Korean Medicine according to disparity of age, the related contents were extracted from Donguibogam and Liuyi, Sasang constitutional medicine. Results: A total of 30 studies, were collected as data. In the baby stage, the development and myelination of brain neurons are accelerated by experience and learning, highly influenced by social, cognitive and emotional movement. In infancy, the frontal lobe actively develops, so education for development of the prefrontal cortex is suggested. The brain of the infant at this stage can be developed by arts and physical education. In the child stage, the parietal and temporal lobe develop actively. Thus, programs to stimulate brain activity including brain respiration would be helpful in enhancing learning ability, concentration, etc. As evidence for learning and nurturing methodology according to disparity of age from Korean Medicine prospective, the following are listed: Location and time for sexual intercourse before pregnancy, stabilization during pregnancy, baby nurturing methods for nurturing from Donguibogam. Also Liuyi and Sasanag constitutional medicine can be the learning methodology according to disparity of age. And there are acupuncture points on each head section according to age in Donguibogam. Conclusions: Studies on 'brain-science based learning' are continuously being conducted. Based on these studies, diverse new brain-science based learning will be developed in the future. There is also a need to develop the learning methodology of Korean Medicine according to disparity of age in a more systematic and diverse way.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.4
• /
• pp.459-468
• /
• 2000

Objectives : To investigate the association between BMI and Mortality. Methods : This study was based on the analysis and assembly of the 'Kangwha Cohort Study', previously conducted by the Department of Preventive Medicine, Yonsei University. A total of 2,696 males and 3,595 females were followed for almost ten years and ten months from March 1985 to January 1996, a total of whom 2,420 died during this period. The Cox's proportional hazards regression model was used to analyze this data. Results : We found a U-shaped relationship between BMI and mortality among the aged men in the Kangwha cohort. The hazard ratio of dying was adjusted for age, marital status, occupation, self cognitive health level, chronic disease, smoking, and alcohol frequency, then sorted by body mass index into the following groups; less than 10.5, 18.5 to less than 21.0, 21.0 to less than 23.5, 23.5 to less than 26.0 and greater than or equal to 26. The corresponding ratios for men were 1.81(1.50-2.19, 95%CI), 1.31(1.14-1.51, 95%CI), 1.0(referent), 1.05(0.87-1.26, 95%CI) and 1.39(1.09-1.76, 95%CI), respectively. And for women, 1.46(1.19-1.78), 1.12(0.95-1.31, 95%CI), 1.0(referent), 1.00(0.84-1.20, 95%CI) and 1.09(0.89-1.34, 95%CI), respectively. Conclusions : The risk of death among aged men in Kangwha increased in the under and overweight groups. The relationship between BMl and mortality has been well studied in Western populations, but little is known about the association between BMI and mortality in our country. So, on the basis of this study, it is apparent that more studies of the relationship between BMI and mortality will be needed for future work.

• Journal of Climate Change Research
• /
• v.9 no.2
• /
• pp.181-195
• /
• 2018

On December 12, 2015, the Conference of the Parties to the United Nations Framework Convention on Climate Change (UNFCCC) adopted the Paris Agreement, in which several developed and developing countries all committed to participating in the reduction of greenhouse-gas (GHG) emissions. South Korea has submitted an intended nationally determined contribution (INDC) proposal with a target to cut down 37% greenhouse gas business as usual (BAU) until 2030 in preparation for the 2030 GHG BAU. Under the post-2020 regime, which will be launched from 2021 as the agreement entered into force early, it is expected that efforts to support GHG reduction and adaptation to climate change in developing countries will be accelerated with the utilization of technologies and financial resources of developed countries. South Korea has established the Basic Plan for Climate Change Response and the Basic National Roadmap for Greenhouse Gas Reductions by 2030 to promote the response to climate change at the government level. The Ministry of Science and ICT, as the National Designated Entity designated by the UNFCCC, has come up with middle and long-term strategies for climate technology cooperation. South-Korea has an abundance of energy-consuming industries to support its export-oriented industrial structure; it is thus expected that achieving the GHG reduction target will incur a considerable cost. Moreover, in order to meet the reduction target (11.3%) of the intended nationally determined contribution proposed by South Korea, it is necessary for South Korea to actively promote projects that can achieve GHG reduction achievements, and financial resources are needed as leverage to reduce risks that can occur in the early stages of projects and attract private sector investment. This paper summarizes the theoretical discussions on climate finance and conducted a comparative analysis on the status of the funds related to climate change response in the UK, Germany, Japan and Denmark. Through this, we proposed the legal and policy tasks that should be carried forward to raise public funds that can be used for creation of new industries related to climate change as well as to reduce GHG emissions in South Korea. The Climate Change Countermeasures Act, which has been proposed by the National Assembly of South-Korea, stipulates the establishment of funds but there is no additional funding except for general account. In this regard, it is also possible to take measures such as the introduction of carbon tax or the collection and use of royalties through technology research and development projects for climate change, such as Industrial Technology Innovation Promotion Act. In addition, since funds are used in various fields such as domestic greenhouse gas reduction, technology development, and overseas projects, it is necessary to establish a system in which various ministries cooperate with the operation of the fund.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.81-87
• /
• 2011

In this study, UV curing and crosslinking process was introduced for synthesis of acrylic foam tape that can be applied to the the automotive assembly process. Polymerized adhesive are laminated to baseform and varying the thickness of specimens were prepared. To measure basic mechanical properties, stainless steel was used. And in the test peel, dynamic shear and t-block were used. The acrylform adhesive show better results compare with typical adhesive and the properties depand on external factors - thick, wetting time -. To analysis functions of acrylic foam adhesive used to automobile production, evaluate the adhesive properties on the various plastic substrate. In PP and PE are categorized low surface energy materials, their properties have not been expressed. But dynamic shear tests show that some properties could be expressed by the difference break mechanism.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.613-620
• /
• 2021

A flow channel shape of PEMFC has an influence on the internal flow uniformity. If the reactant distribution in a flow path is not uniform during operation, both catalyst deactivation and mechanical damage of membrane could occur resulting in decreasing the membrane electrode assembly (MEA) durability. Numerous studies concerning flow design have been conducted to make smooth supply and uniform distribution of reactants in fuel cells. The baffle of flow path could improve fuel cell performance through the forced convection effect. A sub-channel, as an additional air flow path, could increase the reactant concentration and reduce the mass transfer loss via a smooth water discharge. In this study, computational fluid dynamics (CFD) was used to analyze the effect of blocks and sub-channels on the current density and oxygen concentration of the fuel cell. As a result, the limit current density and oxygen concentration at a rear block increased when using blocks and sub-channels in a flow channel. In particular, the current density increased significantly when the sub-channel was placed between two blocks. Also, the sub-channel position was optimized by analyzing the oxygen concentration, and the oxygen concentration was recovered at a rear block in the fuel cell.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.446-457
• /
• 2021

The aim of this study was to grasp the seriousness of depression problems in medical students by examining the research trends among them and to present desirable direction of the future study. A selective search has been conducted for literature published in Nurimedia (DBPIA), Korean studies Information Service System (KISS), Research Information Sharing Service (RISS), National Assembly Library (NANET) and National Digital Science Library (NDSL) databases. 18 papers have been selected for the final analysis. The results showed that studies on depression problems were published in very small proportion which researchers with diverse majors including psychiatry participated. Second, most of depression assessment tools usually measured depression only while some did various psychological symptoms. Third, independent t test was the most frequent analytic method. Last but not least, there was no research dealing with intervention about depression in medical students. To sum up, though numerous researchers with diverse specialties participated in the depression study and analyzed the data using various analyses and variables, there is a lack of intervention for depression of the medical students. Therefore, it is necessary to emphasize the necessity of practical intervention based on the evidence-based practice.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1834-1845
• /
• 2021

Liquid lead-bismuth cooled fast reactor is one of the most promising reactor types among the fourth-generation nuclear energy systems. The flow and heat transfer characteristics of lead-bismuth eutectic (LBE) are completely different from ordinary fluids due to its special thermal properties, causing that the traditional Reynolds analogy is no longer recommended and appropriate. More accurate turbulence flow and heat transfer model for the liquid metal lead-bismuth should be developed and applied in CFD simulation. In this paper, a specific CFD solver for simulating the flow and heat transfer of liquid lead-bismuth based on the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model was developed based on the open source platform OpenFOAM. Then the advantage of proposed model was demonstrated and validated against a set of experimental data. Finally, the simulation of LBE turbulent flow and heat transfer in a 7-pin wire-wrapped rod bundle with the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model was carried out. The influence of wire on the flow and heat transfer characteristics and the three-dimensional distribution of key thermal hydraulic parameters such as temperature, cross-flow velocity and Nusselt number were studied and presented. Compared with the traditional SED model with a constant Pr_t = 1.5 or 2.0, the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model is more accurate on predicting the turbulence flow and heat transfer of liquid lead-bismuth. The average relative error of the k - 𝜀 - k_𝜃 - 𝜀_𝜃 model is reduced by 11.1% at most under the simulation conditions in this paper. This work is meaningful for the thermal hydraulic analysis and structure design of fuel assembly in the liquid lead-bismuth cooled fast reactor.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.31-43
• /
• 2019

In this study, polymer elastic bumps were fabricated for the flexible electronic package flip chip bonding and the viscoelastic and viscoplastic behavior of the polymer elastic bumps according to the temperature and load were analyzed using FEM and experiments. The polymer elastic bump is easy to deform by the bonding load, and it is confirmed that the bump height flatness problem is easily compensated and the stress concentration on thin chip is reduced remarkably. We also develop a spiral cap type and spoke cap type polymer elastic bump of $200{\mu}m$ diameter to complement Au metal cap crack phenomenon caused by excessive deformation of polymer elastic bump. The proposed polymer elastic bumps could reduce stress of metal wiring during bump deformation compared to metal cap bump, which is completely covered with metal wiring because the metal wiring on these bumps is partially patterned and easily deformable pattern. The spoke cap bump shows the lowest stress concentration in the metal wiring while maintaining the low contact resistance because the contact area between bump and pad was wider than that of the spiral cap bump.