• Journal of Korea Water Resources Association
• /
• v.34 no.4
• /
• pp.365-379
• /
• 2001

This paper presents an echo-hydraulic experimental approach to assessment of ascending capacity of migratory fish in a baffled fishway. Sweetfish, Plecoglossus altivelis, trout, Oncorhynchus mykiss, are used in these experiments. Ascending environment of the migratory fish in rivers is analyzed through the results of taco-hydraulic experiments. Important factors affecting the ascending capacity of migratory fish in baffled fishways are the discharge and slope of fishways and the fall height between the fishway entrance and the river bed. In these fishways the migratory capacity of sweetfish for a given fishway discharge is mainly affected by fishway slope, whereas the ascending capacity of trout for a given fishway slope was influenced by the change of fishway discharge. Loss of ascending properties of landlocked salmon, Oncorhynchus masou var ishikawai, was confirmed by these experiments. An ascending hydraulic criteria of the baffled fishway is defined by means of dimensionless factor F$_{f}$ and falling head H$_{f}$. Ascending capacity of migratory fish in existing baffled fishways in river of eastern coastal region is poor because the slope of fishways is verb steep.eep.

• Journal of Korea Water Resources Association
• /
• v.34 no.4
• /
• pp.381-390
• /
• 2001

This is to evaluate the ascending capacity of migratory fish in the pool and weir type fishways. Ascending environment of the migratory fish in rivers is analyzed through eco-hydraulic experiments using sweetfish, Plecoglossus altivelis, trout, Oncorhnchus mykiss, and surveying the fall height of existing pool and weir type fishways. When the fall height is less than 16.0cm, the ascending capacity of sweetfish in the pool and weir type fishways is greater than trout. On the other hand when the fall height is over 20.0 cm, the ascending capacity of trout is greater than sweetfish. A sweetfish may prefer to jump for upward moving than trout. And its endurance after upward jumping over wear is greater than that of sweetfish. Because of high fall height of existing pool and weir type fishways the migratory environment in rivers is so poor. When the pool and weir type fishways are designed and constructed in river the fall height of weir must be considered for the variety of migratory fish living in river and the fall height of weir less than 20.0cm is suggested.

• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.541-552
• /
• 2004

In this paper, ascending functions of the pool-and-weir fishway which has been established for the upstream migration of migratory fish at Jamsil Weir in the lower part of the Han River was assessed by applying tile Existing Fishway Measurement Method, and measures to improve these functions were suggested. The primary fish which ascended the fishway during the period of measurement was Erythroculter erythropterus Basilewsky, greater than 29cm in the body length. A total of 361 individual fish were collected with traps established at the exit of the fishway The maximum ascending capacity for the fish was 2.53${\times}$10^{-3}$ fish/hr/g. The fishway of Jamsil Weir does not satisfy the various fish species inhabiting in the river. Especially, small fishes of lower swimming ability may not ascend the fishway because the difference in water levels between upper and lower pools in the fishway was too large at the exit and there was too much discharge flowing into the fishway. This fishway does not have a roll in the ascending function for other species except Erythroculter erythropterus Basilewsky and Hemibarbus labeo Pallas, for which swimming ability is great. In order to improve the ascending function of the fishway, the structures of the fishway need to be changed so that various species in the river can easily ascend and the fishway function be taken into consideration in operation of the gates of the weir. Additional construction of fishways on both sides of the lower flow channel are needed to correct a decline in the fishway effectiveness due to continuous flow over the fixed part of the weir.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.6
• /
• pp.525-529
• /
• 2016

In the case of a motor system that converts electrical energy into mechanical energy, the region of the motor and that of the generator coexists. In the case of an escalator, the ascending escalator is operated by the motor, whereas the descending escalator is operated by the generator according to the load. To evaluate the proposed method, this study reduces the power of the ascending escalator up to approximately 35% by sharing the regeneration power of the descending escalator. The loss of transfer power nearly exists in the case of the proposed method. Furthermore, the lifetime of the DC link condenser can be extended because it is connected in parallel, thus leading to a twofold increase in capacity.

• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.99-109
• /
• 2022

This study was intended to suggest the applicability of stepped boulder fishway using the concept of traditional boulder weir, focusing on the problems of existing concrete pool-and-weir fishways installed in mountain streams. To achieve this purpose, a stepped boulder fishway was designed and constructed as a pilot project in consideration of ascending capacity of the selected target fishes. Under the given discharge conditions, the hydraulic characteristics of the fishway were investigated in the field, and the characteristics and ascending capacity of the fishes were compared and analyzed. The fishway had a short length and steep slope, but the mean drops between each baffle were the range of 0.15 to 0.29 m, and this range satisfied the limit condition of about 0.40 m, which was in the limit of the drop that target fishes can ascend. The mean velocities of each baffle and pool were 0.82 to 0.87 m/sec and 0.13 to 0.24 m/sec. This result satisfied the conditions of burst speed (10 to 30 times of body length) and mean velocity of the resting pool (7 to 25% of burst speed) for target fishes. Since the bottom surface of the pool formed of boulders had a gentle reverse slope and rotational flow did not occur, the efficiency of fishway can be increased, and it will also be possible to solve the maintenance problem by flushing bed materials.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.1
• /
• pp.59-64
• /
• 2016

This paper suggests heuristic algorithm with O(mn) polynomial time complexity using Excel for partially survivable networks optimization problem of cellular telecommunication systems with m cells and n hubs. This problem only can be get the solution using linear programming or LINGO software package. The proposed algorithm connects the cell to hubs in ring network with minimum cost as the connection diversity of each cell. If the traffic of ring network (T) is T>2K for ring capacity (K), we adjust the maximum cost hub to MTSO that has a ascending order of (D/DC)/${\Delta}^+$ cell with each cell traffic demand (D) and ${\Delta}^+$=(MTSO cost-maximum cost hub) than we get the $T{\leq}2K$. Finally, we adjust MTSO to the removed maximum cost hub for the cell with 2K-$T{\geq}$(D/DC) and $_{max}{\Delta}^-$. While we using like this simple method, the proposed algorithm can be get the same optimal solution for experimental data as linear programing and LINGO software package.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.73-79
• /
• 1968

The resolving capacities of xanthophyll pigments on thin-layers of Silica Gel, Hyflo super-Cel, and Micro-Cel C with varying concentrations of acetone in petroleum ether as the developing solvent were compared. The results showed that the resolving capacity of Micro-Cel C thin-layer was superior to others and satisfactory for the separation of leaf carotenoids in clearly separated six bands; carotenes, lutein-zeaxanthin, antheraxanthin, violaxanthin, an unidentified band, and neoxanthin, when it was developed with $13\%$ acetone-petroleum ether solution for 15 to 20minutes in an unsaturated chamber. Adhension of Micro-Cel C to glass was adequate without binder. Calcium sulfate used as a binder appeared to inactivate the resolving capacity of Micro-Cel C. Removing an about 0.2cm-wide layer on bo side of thin-layer slide helped to prevent 'edge effect' which gave tailing and faster solvent ascending along the side than the center. An adequate thickness of thin-layer was obtained when a 3 ml aliquot of the suspension in which l0g powdered Micro-Cel C was suspended in 75 ml distilled water was coated on a $2\times20cm$ glass slide.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.1
• /
• pp.34-39
• /
• 2002

Most X-ray generator had been used do rectifier type transformer high tension generator which is supplied in a clinical diagnosis. But it is difficult to miniaturize and become light weight. Also, because the ripple rate of tube voltage is high, X-ray generating efficiency is very low. Therefore, it is supplied gradually from abroad being developed high tension generator for inverter type X-ray generator which use semi-conductor switching element for electric power that have high speed switching ability to solved these problem. But, semi-conductor element of big capacity are used by X-ray tube's big consumption power and diffusion is difficult in the small size hospital because production cost is ascending by doing digital control through DSP and product price becomes expensive. Therefore, in this paper, design and manufactured CR type voltage divider for feedback control of tube voltage of high frequency resonance type inverter and high tension transformer for high frequency to apply economical diffusion type X-ray generator which have wide output voltage and load extent. It is Proved do X-ray generator and stability of X-ray tube's output characteristics through an experiment.

• Journal of the Korean Society of Food Culture
• /
• v.31 no.3
• /
• pp.226-234
• /
• 2016

In this study Muffins adding each 0, 1, 3, 5 7% of Acai Berry powder, which has very high anti-oxidant constituent, have been made, and its quality characteristics have been surveyed. From the volume and specific volume measurement, it has been decreased for MA1, 1% of Acai Berry powder added muffin, but the tendency thereafter has shown increasing (p<0.001). From texture characteristics gumminess and chewiness of MA0, reference group, was the highest by 885.86 g/ cm and 6645.71 g, and has shown decreasing tendency as per the adding rate of Acai Berry powder increased (0.001). The electronics scavenging activity of MA7, 7% added muffin, was the highest by 68.91%, and the ascending order was MA1 < Reference Group < MA3 < MA5 < MA7. From the preference test of Acai Berry powder added muffin, MA3, 3% added muffin, was the most preferable one from color, taste as well as total preference. As the added volume of Acai Berry powder is 5% or more, the typical taste and flavor of Acai Berry gives influence to the taste and flavor of muffin, so the preference level has been decreased. Thus the added volume of Acai Berry powder 5% or more is not recommendable.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.705-717
• /
• 2018

This paper presents a numerical investigation on the mechanical performance of concrete-filled dual steel tubular columns of circular section subjected to concentric axial load. A three-dimensional numerical model is developed and validated against a series of experimental tests. A good agreement is obtained between the experimental and numerical results, both in the peak load value and in the ascending and descending branches of the load-displacement curves. By means of the numerical model, a parametric study is carried out to investigate the influence of the main parameters that determine the axial capacity of double-tube columns, such as the member slenderness, inner and outer steel tube thicknesses and the concrete grade - of both the outer concrete ring and inner core -, including ultra-high strength concrete. A total number of 163 numerical simulations are carried out, by combining the different parameters. Specific indexes are defined (Strength Index, Concrete-Steel Contribution Ratio, Inner Concrete Contribution Ratio) to help rating the relative mechanical performance of dual steel tubular columns as compared to conventional concrete-filled steel tubular columns, and practical design recommendations are subsequently given.