• 한국의학물리학회지:의학물리
• /
• 제26권4호
• /
• pp.201-207
• /
• 2015

세기조절방사선치료의 선량정확도에 대한 품질보증 과정에서 측정된 데이터를 기반으로 실제 치료 환자 신체 내의 치료 선량분포를 재계산하여 치료계획 시 계산된 선량분포와 비교, 분석을 수행할 수 있는 프로그램들이 개발되어 임상에 사용 중에 있다. 본 연구에서는 아크첵(ArcCHECK)을 사용하여 품질보증 과정에서 측정한 토모테라피 선량 데이터를 기반으로 환자 내 치료선량 분포를 재구성할 수 있는 3DVH 프로그램의 새로운 기능 및 선량정확도를 평가하고자 하였다. 이를 위한 가상의 환자로 이차원 다이오드 검출기 배열 장치인 MapCHECK 영상을 사용하여 토모테라피 치료계획을 수립하고, 아크첵으로 선량을 측정 후 다시 3DVH를 사용하여 MapCHECK 검출기 영역의 선량분포를 재계산한 후, 실제 MapCHECK에서 측정된 선량분포와 비교하여, 그 오차를 분석하였다. 분석 결과, 측정값과 3DVH 계산값 비교를 위한 감마평가에서 평균 합격률은 $92.6{\pm}3.5%$로 측정값과 토모치료계획에서 계산된 선량과의 감마평가 평균 합격률 $99.0{\pm}1.2%$보다 오차가 큼을 보였다. 래피드아크에서 비교한 3DVH 계산값과 측정값의 감마평가 평균 합격률 $99.3{\pm}0.9%$와 비교하였을 경우에도 더 큰 오차를 보여, 토모테라피에서 3DVH 선량 계산 기능을 임상에서 신뢰하고 사용하기에는 더 많은 측정 결과들의 분석과 오차 원인에 대한 분석이 수행되어야 할 것으로 생각된다.

• Journal of Welding and Joining
• /
• 제9권3호
• /
• pp.52-61
• /
• 1991

In the recent years the computer-numerical controlled cutting process such as a plasma arc cutting and a laser cutting is widely applied to reduce the time and cost expense for generating NC part program of the parts to be cut. In the present study, a CAD system(C-CAD) was developed to generate automatically the NC part programs with CLDAT(Cutter Location Data)for the CNC plasma arc cutting system. The NC part programs are composed of the 2-dimensional drawing of the parts to be cut and the technological data. The shape data of the parts drawn in the Auto-CAD can be also used in the C-CAD, since the data file generated by the C-CAD is compatible with that by the Auto-CAD. In order to check its applicability, the C-CAD and CAM system were applied to cut the parts, and which showed the satisfactory results.

• 아태비즈니스연구
• /
• 제9권2호
• /
• pp.1-13
• /
• 2018

Physics simulation is an important part of many interactive 2D applications and collision detection and response is key component of this simulation. While methods for reducing the number of collision tests that need to be performed has been well researched, methods for performing the final checks with collision primitives have seen little recent development. This paper presents a new collision primitive, the n-arc, constructed from piecewise circular curves or biarcs. An algorithm for performing a collision check between these primitives is presented and compared to a convex polygon primitive. The n-arc is shown to exhibit similar, though slightly slower, performance to a polygon when no collision occurs, but is considerably faster when a collision does occur. The goodness of fit of the new primitive is also compared to a polygon. While the n-arc often gives a looser fit in terms of area, the continuous tangents of the n-arcs makes them a good choice for organic, soft or curved surfaces.

• Journal of Welding and Joining
• /
• 제13권3호
• /
• pp.116-124
• /
• 1995

This paper presents an analytical solution to predict the transient temperature distribution in fillet arc welding including the effect of molten metal. The solution is obtained by solving a transient three-dimensional heat conduction equation with convection boundary conditions on the surfaces of a plate, and mapping the infinite plate onto the fillet weld geometry with energy equation. The electric heat input on the fillet weld and on the infinite plate is assumed to have a combination of two bivariate Gaussian distribution. To check the validity of the solution. FCA welding experiments were performed under various welding conditions. The actual isotherms of the weldment cross-sections at various distances from the arc start point are compared with those of simulation result.

• Journal of Welding and Joining
• /
• 제13권2호
• /
• pp.68-81
• /
• 1995

This paper presents an analytical solution to predict the transient temperature distribution in fillet arc welding. The analytical solution is obtained by solving a transient three -dimensional heat conduction equation with convection boundary conditions on the surfaces of an infinite plate with finite thicknesses, and mapping an infinite plate onto the fillet weld geometry with energy equation. The electric arc heat input on fillet weld and on infinite plate is assumed to have a traveling bivariate Gaussian distribution. To check the validity of the solution, GTA and FCA welding experiments were performed under various welding conditions. The actual isotherms of the weldment cross - sections at various distances from the arc start point are compared with those of simulation result. As the result shows a satisfactory accuracy, this analytical solution can be used to predict the transient temperature distribution in the fiIIet weld of finite thickness under a moving bivariate Gaussian distributed heat source. The simplicity and short calculation time of the analytical solution provides rationales to use the analytical solution for modeling the welding control systems or for an optimization tool of welding process parameters.

• 대한화학회지
• /
• 제4권1호
• /
• pp.7-9
• /
• 1957

On sparking carbon-arc in water we found that a inflammable gas was generated. The object of this experiment is to prepare sols of metals by applying the gas mentioned to a solution of metallic salts. As the result of this experiment we found that : 1) By this method we can prepare easily some kinds of Ag-sol from $AgNO_3$ solution in about 30 sec. by adjusting the temperature, the quantity of stabilizer and the concentration of metallic salt. 2) The appropriate concentration of $AgNO_3$ is about 0.01% by volume, that of the stabilizer, 0.9104 N-NaOH is 0.03-2 cc/100 cc of 0.01% $AgNO_3$ solution. And the lower the temperature, the more concentrated the Ag-sol. But to check the possibility of applying this method to metals other than Au and Ag, measurement of the particle size and properties of a sol prepared by this method, should be studied. Especially, we must study what kinds of gases are generated by sparking the carbon-arc in water.

• 대한원격탐사학회지
• /
• 제28권2호
• /
• pp.237-243
• /
• 2012

이 논문에서는 중심주파수 9.65 GHz의 X-밴드 안테나를 이용한 원형레일 기반의 지상 SAR(Arc-SAR) 시스템의 반복 실험을 통해 대기 효과를 정량적으로 분석하였다. 안정된 신호 획득을 위해 고정된 삼각삼면반사체 4개를 사용하였는데 이에 의한 신호는 약 43시간에 걸쳐 연속적으로 획득되었다. 분석 결과 반사체는 고정된 상태였지만 약 5 radian(12.4 mm)의 최대 오차를, 총 65회의 실험에 대한 RMSE는 1.62 radian(4 mm)을 보였다. 이러한 위상변화 양상은 온도, 습도, 그리고 기압을 통해 산출되는 대기굴절률의 변화 양상과 높은 상관관계를 보였다. 대기굴절률을 이용한 보정을 선택된 16시간에 대해 적용하였고 보정 결과 RMSE는 1.74 radian(4.3 mm)에서 0.10 radian(0.24 mm)으로 감소하여 보정이 효과적으로 이루어졌음을 확인하였다.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.2935-2944
• /
• 2000

Gas tungsten arc(GTA) welding is used to rrpiar the seat ring in swing type check valve in power plant because of its high weld quality. In order to automate the welding process, it is needed to analyze the process of inside pipe girth welding. In this study, the shapes of weld bead on pipe inside and outside were predicted and its validity was investigated. On the assumption that the welding arc had a bivariate gaussian distribution, analytical solution was derived to predict the temperature distribution in pipe weld using mapping under consideration of physical relationships. The size of weld bean could be predicted from this equation and its accuracy was verified by experiments.

• 천문학회지
• /
• 제37권2호
• /
• pp.87-90
• /
• 2004

Spectrophotometry of the night sky over Mount Bohyun is presented for the nearly entire visible wavelengths of $3600{\~}$8600{\AA}$. The data was obtained under moonless clear sky in February 2004 with the 1.8-m telescope and the long slit spectrograph. The sky spectrum shows a number of strong emission lines originated from light pollution, especially due to high pressure sodium lamps. When compared to the night sky of Kitt Peak, our sky continuum is 1 to 2 magnitude brighter at all wavelengths, the worst being around the broad emission region near 6000${\AA}$. The night sky spectrum presented here with almost complete line identifications is a useful reference for arc-independent wavelength calibrations to check the gravity flexure of the spectrograph and the wavelength shift between FeNeArHe arc frames and science frames.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1216-1220
• /
• 2012

The current collection between pantograph and contact wire is a more critical component for need to train speed up in electric railway. The basic purpose of this paper is to establish a measure of determining arc by developing an arc detector assessment system. The system was designed under conditions of EN 50317 and simulations were conducted using the developed device. According to the results, it was possible to conduct certification tests following regulations of international standards. To check the validity of our approach for the intended application, we analysis contact loss of catenary system using developed arcing measurement system in Korea. The proposed arcing measurement system is expected to enhance precision of current collection quality performance assessment methods at high-speed lines and conventional lines.