• Journal of Environmental Impact Assessment
• /
• v.14 no.2
• /
• pp.75-81
• /
• 2005

The purpose of this study is to understand the appropriateness of land aptitude assessment system and to draw up the improvement of this method. The land aptitude assessment system is used to evaluate the effective demand of land development and land conservation. But, this assessment system has the technical problem of selection standards because the land development and the land conservation are against each other. In terms of the relation between development and conservation of land aptitude assessment system, development was increased rapidly as the economic pressure of local government. The application of the land aptitude assessment system using GIS methods was very useful for local plan. However, this system need to improve the selection standards of GIS parameters and statistical methods for the desirable land assessment system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.341-342
• /
• 2018

Waterproofing materials and construction methods have been developed and applied to various construction sites since the past. However, there many cases where the waterproofing performance is not satisfactory, leading to continuous water leakage. It has been observed that a key reason for this is because waterproofing method and material selection is not optimized in terms of the appropriate application area and environmental degradation factors. This paper proposes that future selection of waterproofing methods should consider the following evaluation criteria; 1) waterproof performance evaluation according to site conditions, 2) evaluation of construction method, 3) manufacturing and maintenance of waterproofing systems.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.226-235
• /
• 1999

The purpose of this study is to present models for evaluation and selection of Electronic Commerce systems suppliers. The Major concern of management is that almost all decision problems have multiple, usually conflicting, criteria. The fuzzified multi-objective programming models are given to accommodate the aspiration level and satisfaction level of decision makers. The proposed models are classified into three types, that is, min-operator. additive and pre-emptive priority. Numerical Examples illustrating each type of model are presented and the implications of these models are discussed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.193-196
• /
• 2002

Vehicle routing problem is known to be a NP-hard problem, and is traditionally solved by some heuristic approaches. This paper investigates the application of the computer method COMSOAL to the optimal vehicle routing selection problem. The COMSOAL (Computer Method of Sequencing Operations for Assembly Lines) is a computer heuristic originally developed to solve an assembly line balancing problem a few decades ago. The solution methodology of repeatedly running COMSOAL will result in many feasible solutions from which the best is chosen. This solution approach now becomes viable thanks to the significantly increased speed of recent computer technology. This paper discusses the adaptation of the COMSOAL approach to the known set of simple vehicle routing example problem. The results show that the COMSOAL can be a good possible approach to solve the vehicle routing problem.

• Journal of Information Technology Applications and Management
• /
• v.13 no.1
• /
• pp.77-94
• /
• 2006

Case-based Reasoning (CBR) is widely used in business and industry prediction. It is suitable to solve complex and unstructured business problems. Recently, the prediction accuracy of CBR has been enhanced by not only various machine learning algorithms such as genetic algorithms, relative weighting of Artificial Neural Network (ANN) input variable but also data mining technique such as feature selection, feature weighting, feature transformation, and instance selection As a result, CBR is even more widely used today in business area. In this study, we investigated the usefulness of the CBR method in forecasting success in implementing ERP systems. We used a CBR method based on the feature weighting technique to compare the performance of three different models : MDA (Multiple Discriminant Analysis), GECBR (GEneral CBR), FWCBR (CBR with Feature Weighting supported by Analytic Hierarchy Process). The study suggests that the FWCBR approach is a promising method for forecasting of successful ERP implementation in Small and Medium sized Enterprises.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1893-1896
• /
• 2002

Remediation Selection Expert System (RSES) is a rule-based expert system which is used far the selection of remediation techniques fur petroleum contaminated sites. In this paper, we describe a fuzzy logic-based sub-system: Site Characterization Sub-System (SCSS). It is an enhancement of the RSES, which is used to analyze the hydraulic properties of contaminated sites. This paper focuses on an explanation on how to apply fuzzy set theory for identification of soil types and hydraulic properties of a contaminated site. To illustrate application of fuzzy set theory to the problem, two sample cases are presented in detail.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1024-1026
• /
• 1998

In this paper we present a Neural network approach to select weighting matrices of Linear-Quadratic-Gaussian (LQG) controller for TCSC control. The selection of weighting matrices is usually carried out by trial and error. A weighting matrices of LQG control selected effectively using Neural network. It is shown that simulation results in application of this method to one machine infinite bus system are satisfactory.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.54-60
• /
• 2014

In industry, several casting process are widely used to manufacture complex and accurate blank part of hard materials such as aluminum, casting steels, bronze and magnesium alloys which are difficult to manufacture in a blank shape. Even if the casting process does not high accuracy superior surface characteristics other machining process, the casting process is widely used in manufacturing blank part. Furthermore, it is difficult to select appropriate casting process a part among several casting process. for effective selection different process, a careful decision given casting application is necessary. An appropriate casting for a given material and shape condition must be selected for novice engineers in industry. In this paper, an expert system based on an analytic network process(ANP) is suggested for best selection of casting considering a prior interdependency effect among various factors such as material, geometry, process capability, economy and equipment.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.333-339
• /
• 2010

Data mining is the process of finding and analyzing data from a big database and summarizing it into useful information for a decision-making. A variety of data mining techniques have been being used for wide range of industries. One application of those is especially so for gathering meaningful information from process data in manufacturing factories for quality improvement. The purpose of this paper is to provide a methodology to improve manufacturing quality of fuel tanks which are auto-parts. The methodology is to analyse influential attributes and establish a model for optimal manufacturing condition of fuel tanks to improve the quality using decision tree, association rule, and feature selection.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.1
• /
• pp.39-45
• /
• 2010

As wireless sensor network are being deployed in a wide variety of application areas, the number of sensor nodes in a sensor filed becomes larger and larger. In the past, ISP (In-System Programming) method have been generally used for code update but the large number of sensor nodes requires a new code update method called network reprogramming. There are many challenging issues for network reprogramming since it can make an impact on the network lifetime. In this paper, a new sender selection scheme for network reprogramming protocol is proposed to decrease energy consumption for code update by minimizing overlapped area between sender nodes and reducing data contention. Simulation results show that the proposed scheme can reduce the amount of message traffic and the overall data transmission time.