• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.266-269
• /
• 2003

This paper is concerned with a forming analysis of front side members and the application of the forming effect in crash analysis of auto-body. Drawbead restraining forces are calculated with ABAQUS/Strandard in order to identify the boundary condition in forming process. Forming analysis with equivalent drawbead is carried out with LS-DYNA3D. In order to demonstrate the validity of the forming analysis, quantitative comparison of the thickness variation between the real product and the numerical simulation result is carried out. Forming histories obtained from the forming analysis are utilized as the initial condition of the crash analysis for accurate assessment of the crashworthiness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.613-616
• /
• 1997

MDO(Multidisciplinary Design Optimization) methodology is an emerging new technology to solve a complicate structural analysis and design problem with a number of design variables and constraints. In this paper MDO methodology is adopted through the use of computer aided engineering(CAE) system. And this paper treats the structural design problem of RIROB(Reactor Inspection Robot) through the application of MDO methodology. In a MDO methodology application to the structural design of RIBOS, kinetodynamic analysis is done using a simple fluiddynamic analysis model for the warter flow over the sensor support surface instead of difficult fluid dynamic analysis. Simultaneously the structural static analysis is done to obtain the optimum structural condition. The minimum thickness (0.8cm) of the RIROB housing is obtained for the safe design of RIROB. The kinetodynamic analysis of RIROB. The kinetodynamic analysis of RIROB is done using ADAMS and the static structural analysis of RIROB is done using NISA.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.957-965
• /
• 2008

Recently, slope stability analysis in current design criteria is criticized for its unrealistic assumption of groundwater table and slope stability analysis incorporating seepage analysis considering rainfall is gaining a recognition as an alternative. However, a reasonable method for determining the rainfall used in the seepage analysis has not yet been established. Rainfall input for seepage analysis is a time series of rainfall and is similar to the hyetograph which is usually obtained from hydrology. In this paper a method to obtain the hyetograph from the intensity-duration-frequency is proposed. The resulting hyetograph can be used in the in the slope design stage. Also some considerations for practical application of slope stability analysis considering the rainfall is included.

• International Journal of Contents
• /
• v.10 no.4
• /
• pp.83-89
• /
• 2014

This study suggests an effective online guide for foreign teachers who want to teach English in Korean schools. When designing this guide for overseas applicants, there should be a consistent analysis to reflect the process of the system. Thus, this paper provides an analysis and results for an integrated online guide to increase the efficiency based on the pedagogical framework for analysis of the 'ADDIE' model (Analyze, Design, Development, Implementation, and Evaluation). The number of job applicants who wish to teach English in Korea is growing rapidly because Korea is one of the fastest growing economies in the world and the 'Korean Wave' has especially been experiencing significant changes with the development of social network services and digital technologies. As a result, overseas applicants' expectations regarding Korea when they are seeking information and applying is very high, but the aspects of the procedure provided by the government are somewhat disappointing. The paper presents customer needs and specific recommendation for each step of the application process to improve the guide's effectiveness.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.3
• /
• pp.79-87
• /
• 2006

This study aims to presents the applicability of apartment building for renewable energy systems using method of uncomplicated calculation and computer simulation. According to the weather conditions (NASA Surface meteorology and Solar Energy) analysis, it has been found that photovoltaic and wind power system can be applied to apartment buildings application. In case study considering layout and block plan, adaptation of solar water heating, photovoltaic and wind energy system to apartment buildings was proved to produce a profit. And the application strategies of renewable energy systems can be used not only for the investment decisions for economic analysis but also for the comparative analysis of uncomplicated calculation and computer simulation.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.190-192
• /
• 2008

GNSS(Global navigation Satellite system) is the system which determines the users' position using the navigation satellites. The position determination using GNSS has to be always Possible to appling GNSS to railway system widely. Especially, to apply GNSS to the safety-critical application, such as train control system, the satellite's visibility has to be always secured. This study describes the necessity of visibility analysis and the method. And also the visibility analysis of the stand-alone GNSS and the integration GNSS are performed and the applicability of GNSS for train control application is analysed.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.58-60
• /
• 2004

This paper presents a design and characteristics analysis of an SRM drive for EPS application. A rack mounted EPS system is considered in this paper. In the unrestricted design conditions, motor parameters are determined for sufficient torque and speed with some restrictions. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis, redesigned motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by redesigned motor drive tests.

• Journal of electromagnetic engineering and science
• /
• v.2 no.1
• /
• pp.5-10
• /
• 2002

We have analized the inverse class-F and class-F amplifiers using their waveforms. From the analytic equations derived from the analysis, we have calculated tole efficiencies, output powers, DC power dissipations, and optimum fundamental load impedances of the inverse class-F and class-F amplifiers. We also have compared them for various operation conditions, which include the same peak current, saute DC power dissipation, same fundamental RF output power, and same fundamental load impedance with different Ron(on-resistance). These analyses have clearly shown the performance limitations, advantages, and guide to the optimized design of the inverse class-F amplifiers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.679-682
• /
• 2004

GIS equipment has problems on confidence according to long-time usage, development of diagnosis technique has been importantly recognized accordingly. Therefore. measurement and analysis of PD has been generally used much equipment of GIS. But, in case of measurement of PD at field, real trouble signals are difficult to classify noise. Accordingly, a variety of trouble conditions for DS were simulated, and detected signals were analyzed by the application of electrical and mechanical methods. For this analysis, detected signals were accumulated according to phase-magnitude with the application of Induction sensor, and then we analyzed the characteristics. For the simulation experiment, we made DS for 170kV GIS and analyzed the characteristics of detected signals with the application of neural network algorithm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1207-1210
• /
• 2004

Recently, because GIS equipment has problems on confidence according to long-time usage, development of diagnosis technique has been importantly recognized. Therefore. measurement and analysis of PD has been generally used much equipment of GIS. But, in case of measurement of PD at field, real trouble signals are difficult to classify noise. Accordingly, a variety of trouble conditions for DS were simulated, and detected signals were analyzed by the application of electrical and mechanical methods. For this analysis, detected signals were accumulated according to phase-magnitude with the application of Induction sensor, and then we analyzed the characteristics. For the simulation experiment, we made DS for 170kV GIS and analyzed the characteristics of detected singals with the application of neural network algorithm