• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.142-144
• /
• 2003

3차원 apparel CAD system개발에 있어서 직물의 드레이프 모사가 걸림돌이 되어왔다. 최근 컴퓨터의 속도 개선으로 인해 정적 드레이프의 경우 데이블 보 문제와 같이 적절한 시간내에 드레이프 모사가 이루어지고 있다. 그러나 드레이프는 cloth와 body간의 충돌 검사에 많은 시간이 소요되므로 virtual fashion show와 같이 인체가 운동하는 동적 드레이프의 경우는 아직도 어려운 문제이다. (중략)

• The Research Journal of the Costume Culture
• /
• v.10 no.5
• /
• pp.542-554
• /
• 2002

The purposes of this study were to investigate, analyze, and consider the feature and practical situation of Apparel CAD education and distribution situation of CAD system so that CAD education can be effectively operated and managed in various kinds of relevant schools and universities. 32 colleges and universities that are performing CAD educational system are selected for the study. The author of the study has investigated and obtained the information through questionnaires to 32 professors who are in charge of CAD lectures and 301 students who are receiving CAD education. The result is as follows. 1. It showed that 62.5% of CAD educational systems have been practically introduced after 1995. Regarding the using system, YUKA occupies 46.9%, PAD 21.8%, and GERBER 18.8% and these three kinds of system have been chiefly supplied. 40.6% of them own only one system, 37.5% of them own 2～5 systems and 78% of them own less than 5 systems. 2. The most seriously pointed problems during the operation of CAD system were the lack of experimental materials and the frustration of manpower supply. Thus, the CAD education programs in schools and universities are practiced in inferior environments internally and externally. 3. Regarding the practical situation of CAD education, 28 among 32 schools and universities are performing CAD as one of the regular subjects for the curriculum. 4. Regarding satisfaction degree of the using system, professors showed higher satisfaction degree than students did. In conclusion, it showed that although the practical situations of CAD education in schools and universities have been changed and improved so much since 1995 owing to the increase of the positive recognition of the necessity of CAD, many students in the educational sites cannot study their favorite subjects related with CAD program with interest due to the lack of experimental facilities, the poor computer management systems, and the problems of manpower supply, etc.

• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.348-354
• /
• 2005

These days consumers' various demands are accelerating research on apparel manufacturing system including automatic measurement, pattern generation, and clothing simulation. Accordingly, methods of reconstructing human body from point-clouds measured using a three dimensional scanning device are required for apparel CAD system to support these functions. In particular, we present in this study a human body reconstruction method focused on two issues, which are the decision of the number of control point for each sectional curve with error bound and the local knot removal for reducing the unusual concentration of control points. The approximation of sectional curves with error bounds as an approximation criterion leads all sectional curves to their own particular shapes apart from the number of control points. In addition, the application of the local knot removal to construction of human body sectional curves reduces the unusual concentration of control points effectively. The results may be used to produce an apparel CAD system as an automatic pattern generation system and a clothing simulation system through the low level control of NUBS or NURBS.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.103-114
• /
• 2011

During a wearer's movement, the apparel fabric layers collide each other in a highly complicated manner. The collision involves cloth-cloth, and cloth-body collision. The diversity of the textile fabrics, including silk, wool, cotton, and other synthetic fibers, together with the complex details of the apparel construction, makes the collision and other calculation procedure involved in the 3-dimensional clothing software system much more complicated. Therefore, there is a need to measure the behavior of the fabrics during the fabric collision cycles. In this study, as a first step, static measurements pertinent to the factors governing the appearance of the apparel fabrics were implemented. The drape profile, stiffness(Sd and Sf), tensile properties, thickness, and the air permeability were measured. The correlation between the parameters were calculated and reviewed. It is found that there is a high correlation of 0.97 between the actual fabric drape parameters and the 3D virtual fabric drape parameters. The measured drape coefficients of the fabrics show relatively good correlation with the measured fabric stiffness.

• Journal of the Korean Society of Costume
• /
• v.59 no.8
• /
• pp.26-36
• /
• 2009

The aim of this study is to be the fundamental study for virtual clothing system of the future through a comparative analysis of the difference between a virtual frill skirt and a real frill skirt using a 3-dimensional Apparel cad system. Satin was selected as a comparative fabric of the real skirt and virtual skirt. And compared skirts are frilled 1.5widths, 2widths, and 2.5widths. In case of 1.5widths frilled, the real skirts and virtual skirts showed no significant difference except in shirring frill expression. However, in case of 2widths frilled, and 2.5widths frilled skirts, significant differences in the extent of frill flattening, the sectional diagram of the bottom hem, and the skirt shape. The virtual skirt showed that as its multiple proportion of frill increased, the sidelines of the skirt drooped and excessively extended, and collision detection that the belt was twisted and torn apart arose. Furthermore, not only the frill but also the shape of the skirt was transformed, and the bottom hems were widened back and forth, and the sectional diagram of the bottom hems were transformed into rounded shapes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.43-56
• /
• 1994

The Purpose of this study was to utilize of CAD System in pattern making process for women's apparel. The automation by the use of CAD System provides the higher accuracy and efficiency in pattern making process. AccuMark 300 System was used. for .this study. The results from this study were as follows . 1. New size spec chart and grading pitch chart were developed based on the data analysis and fitting tests for female college students. 2. New jacket block was developed based on the torso length sloper 3. Automatic grading of jacket block have been developed by creation and modification of grading rules of block pattern. 4. Pattern Design Systyem(P/D/S) were enabled to be constructed directly form a block pattern by modifications to existing styled pattern. 5. Original master pattern was generated by P/D/S menu option. 6. Production pattem added seam allowance, notchs was generated by P/D/S menu option. 7 Interative maker making process have enabled to save a wide range of time and space. 8. Measurement of garment by P/D/S measuring tools is to utilize in garment costing, quality control.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.391-406
• /
• 1993

The purpose of this study was to utilize of apparel CAD System by the classification of the basic pattern block in pattern making process. Gerber AM-300 CAD System was used for this study. The results form this study were as follows; 1. New shirts block were developed. 2. The sensory test was applied to evaluate the new shirts block for women by comparing it with Japanese Bunka shirts blouse pattern making method. According to a statistical analysis of the result of the 20 items on the questionnaire, the 19 items showed significant difference(${\alpha}{\leq}0.01$)between the two, with the new shirts block having higher scores. 3. A basic pattern block was selected by the design sketch. 4. P/D/S were enabled to be constructed directly from a block pattern. The drawing, deletion. duplication, and movement of all points and lines in the pattern might be made freely, and the split, pivot, and movement of the pattern, and the attachment of two patterns were possible. 5. Automatic grading of finished pattern have been developed by creation and modification of grading rules of block pattern.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06a
• /
• pp.26-26
• /
• 1993

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.739-743
• /
• 1993

• Proceedings of the Korean Fiber Society Conference
• /
• 1994.04a
• /
• pp.30-30
• /
• 1994