• 전자공학회논문지D
• /
• 제36D권11호
• /
• pp.71-81
• /
• 1999

본 논문에서는 새로운 직접 접근 방법과 이진 영상처리를 통해 컬러 영상을 저장하고 재생할 수 있는 디지털 홀로그래픽 정보 저장 시스템을 구현하였다. 직접 접근 방법을 통해 영상 처리를 수행한 결과, raw 파일을 이용하여 영상처리를 수행하는 것보다 광메모리에 저장되는 페이지 수르르 줄일 수 있었으며, 압축된 $128{\times}80{\times}256$ (6.6KB) 해상도의 컬러 영상을 재생할 수 있었다. 또한 문자 파일이나 동영상 파일등과 같이 파일의 종류에 관계없이 입력 데이터가 디지털 홀로그램으로 변환될 수 있음을 보여주었다.

• 한국항공우주학회지
• /
• 제35권9호
• /
• pp.826-835
• /
• 2007

발사체 열환경 설계를 위해서 여러 종류의 태양열 모델을 비교 검토하였으며, 측정된 태양열과 잘 일치하는 태양열 모델을 개발하였다. 기존의 태양열 모델은 태양 직사광 예측은 정확하지만 산란광에 대해서는 오차가 포함되어 있었다. 이에 반하여 새롭게 개발된 산란광 모델은 등방성, 이방성 산란을 고려하였으며 기존의 어느 모델보다 관측값과 잘 일치하였다. 우주 센터의 태양광 측정 데이터가 매우 적기 때문에 본 모델은 발사체 열하중 설계에 필요한 설계 데이터를 제공할 수 있었다. 또한 본 모델은 위도, 경도, 날짜, 고도에 대한 제한이 없는 일반적인 모델이기 때문에 추후 태양열에 민감한 반응을 보이는 비행기구 등의 개발에 효과적인 열환경 예측 수단을 제공할 수 있다.

• Korea-Australia Rheology Journal
• /
• 제18권1호
• /
• pp.15-24
• /
• 2006

The first international inter-laboratory study, involving six laboratories, has been conducted to examine issues associated with yield stress measurements in suspensions. The initial focus of the project was to evaluate the reliability and reproducibility of several common yield stress measuring techniques employed in different laboratories and with different instruments. Aqueous suspensions of colloidal $TiO_2$ at concentrations of 40-70 wt% solids were used as the test fluids. A wide range of instruments and techniques employing both direct and indirect methods were used to determine the yield stress of the samples prepared according to a prescribed procedure. The results obtained indicated that although variations of results existed among different techniques, direct yield stress measurements using static methods produced more reliable and repeatable results than other methods. Variability of the yield stress measured using different techniques within any laboratory however was less significant than variability of the results among different laboratories. The nature and condition of the test suspensions was identified as the most likely factor responsible for the poor reproducibility of yield stress measurements from different laboratories.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.558-561
• /
• 2001

SIP(Soil cement Injected Precast pile) that inserts a precast pile after injecting a cement paste into a boring has been applied rapidly through the change of construction circumstances. But there isnt any logical equation of a bearing capacity fitted to SIP yet. So Meyerhof equation has mainly been used to predict a bearing capacity in a design stage instead. But it has shortcomings such as lack of confidence because it has derived not from a theory but from an experience obtained from the result of SPT (Standard Penetration Test) and because a penetration depth tends to be deeper by an excessive design that depends on an end bearing capacity of a pile more than a skin frictional resistance. In this study, thereupon, a direct shear test in the laboratory was performed to both SM and SC soils in variable conditions to verify skin friction properties for the purpose of presenting some reasons capable of reducing penetration depths. Through the tests, soil to soil of SM in cohesion, rough panel to soil of SM in friction angle and soil to soil of SM in shear strength tended to be high. And a shear strength increased as its total unit weight increased in all cases.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.531-540
• /
• 2019

Spectral Amplitude Coding Optical Code Division Multiple Access (SAC OCDMA) is an advanced technique in asynchronous environments. This paper proposes design and implementation of a novel quantum logic gate (QLG) code, with code construction algorithm generated without following any code mapping procedures for SAC system. The proposed code has a unitary matrices property with maximum overlap of one chip for various clients and no overlaps in spectra for the rest of the subscribers. Results indicate that a single algorithm produces the same length increment for codes with weight greater than two and follows the same signal to noise ratio (SNR) and bit error rate (BER) calculations for a higher number of users. This paper further examines the performance of a QLG code based SAC-OCDMA system with NAND and direct detection techniques. BER analysis was carried out for the proposed code and results were compared with existing MDW, RD and GMP codes. We demonstrate that the QLG code based system performs better in terms of cardinality, which is followed by improved BER. Numerical analysis reveals that for error free transmission (10^-9), the suggested code supports approximately 170 users with code weight 4. Our results also conclude that the proposed code provides improvement in the code construction, cross-correlation and minimization of noises.

• 대한전자공학회논문지
• /
• 제26권2호
• /
• pp.112-117
• /
• 1989

본 논문은 패턴의 모양에 따라서 패턴 데이타 포멥변환시 분할되는 각종 矩形패턴을 크기에 구애됨이 없이 전자선 직접묘사 시간이 일정한 矩形단위로 전자선 직접묘사하는 방법을 제안하였다. 본 실험에서는 SEM을 사용하였으며 矩形의 크기에 따라 일정시간에 요구되는 전자선 전류를 변화시키기 위하여 집속렌즈의 공급전류를 BITMAP-IV CAD 시스템으로 제어하였다. 본방법에서는 패턴 데이타 포맵변환시 밀집된 패턴에 대한 resizing과정이 불필요하며 묘사시간에 근거한 through-put은 unit scan방식에 비하여 172배가 향상되었다.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.68-79
• /
• 1996

To investigate the efficiency of a fibrous collagen membrane(FCM) composed of bovine skin type I atelocollagen as a carrier for BMP, partially purified bovine BMP/FCM($0.3mg/10{\times}5{\times}1mm$) composites were implanted into the dorsal subcutaneous tissue of rats. FCM alone was also implanted as a control. The implants were harvested at 1, 2, 3, and 10 weeks after implantation, then prepared for routine light microscopic observation. The FCM alone did not induce osteogenesis and revealed no specific foreign body reaction nor was there any definite resorptive evidence for 10 weeks after implantation, while the BMP/FCM composites induced favorable bone formation in a process that resembled an endochondral and direct ossification mode. At 10 weeks, the well formed bone confined to embedded collagen fibers revealed hematopoietic marrow between bony trabeculae without evidence of resorptive or degenerative changes . These findings support the suggestion that BMP may induce undifferentiated mesenchymal cells into either chondroblasts or osteoblasts or both independantly according to the chemico- physical characteristics of the carrier, which develops the endochondral and/or direct bone formation process, and suggest that the FCM may be a favorable carrier for BMP.

• 유통과학연구
• /
• 제10권9호
• /
• pp.37-45
• /
• 2012

Purpose - The objective of the paper is to examine display techniques and tools at traditional clothing stores to improve the traditional market. Since most research has been done theoretical and model based approaches, changing business environments requires more holistic and detailed facts to apply or develop a retail business strategy. Research design / data / methodology - The study employs qualitative research such as direct observation as well as direct interview and telephone interview from May 7 to Jun 2, 2012. The paper examines lighting, various display techniques and tools. The analysis of 80 store pictures for them had been done three examiners with agreement. Results - Sample garments are displayed on the walls; the racks of hangers are attached on the upper part of the walls; there is indirect lighting only. Furthermore, the merchandises are displayed, without any consistency, on various sizes and shapes of hangers, only on the owners' arbitrariness. When considering that the Korean traditional fabrics (Juddan) have a little pattern and colors as their important elements for displaying. Conclusions - The findings of this study show that the retailers in the traditional market need to have lessons on colors and to learn how to use the specific lighting and to display merchandise.

• 한국항해항만학회지
• /
• 제30권2호
• /
• pp.137-143
• /
• 2006

The optimum grillage design belongs to nonlinear constrained optimization problem. The determination of beam scantlings for the grillage structure is a very crucial matter out of whole structural design process. The performance of optimization methods, based on penalty functions, is highly problem-dependent and many methods require additional tuning of some variables. This additional tuning is the influences of penalty coefficient, which depend strongly on the degree of constraint violation. Moreover, Binary-coded Genetic Algorithm (BGA) meets certain difficulties when dealing with continuous and/or discrete search spaces with large dimensions. With the above reasons, Real-coded Micro-Genetic Algorithm ($R{\mu}GA$) is proposed to find the optimum beam scantlings of the grillage structure without handling any of penalty functions. $R{\mu}GA$ can help in avoiding the premature convergence and search for global solution-spaces, because of its wide spread applicability, global perspective and inherent parallelism. Direct stiffness method is used as a numerical tool for the grillage analysis. In optimization study to find minimum weight, sensitivity study is carried out with varying beam configurations. From the simulation results, it has been concluded that the proposed $R{\mu}GA$ is an effective optimization tool for solving continuous and/or discrete nonlinear real-world optimization problems.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.199-204
• /
• 1999

As the engine design change to get high efficiency and performance of commercial diesel engine, surface wear of the cam follower becomes an important issues as applied load increasing at the contact face between cam follower and cam. Purpose of this study is the developing of the ceramic cam follower made of silicon nitride ceramic which is more wear resistant than the cast iron and sintered cam follower. Ceramic cam follower was made by direct brazing of thin ceramic disk to steel can follower body using active bracing alloy. Effect of joining condition on the interfacial phases and joining strength wer examined at bvarious joining temperatures, times, and cooling rates. Crowning resulted from the difference of thermal expansion coefficient after direct brazing without using any stress-relieving inter layer was measured. Interfacial phases are mainly titanium silicide and titanium nitride which are the products between active metal(Ti) in brazing alloy and silicon nitiride. Maximum joining strength of the ceramic metal joint, measured by DBS method, was 334MPa. Crowning(R) of the prototype ceramic cam follower was 1595mm. As machining for crowning is not necessary, production cost can be reduced.