• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.775-786
• /
• 2002

A Mixed Volume and Boundary Integral Equation Method is applied for the effective analysis of elastic wave scattering problems and plane elastostatic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions. It should be noted that this newly developed numerical method does not require the Green's function for anisotropic inclusions to solve this class of problems since only Green's function for the unbounded isotropic matrix is involved in their formulation for the analysis. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of anisotropic inclusions and voids or isotropic inclusions. In the formulation of this method, the continuity condition at each interface is automatically satisfied, and in contrast to finite element methods, where the full domain needs to be discretized, this method requires discretization of the inclusions only. Finally, this method takes full advantage of the pre- and post-processing capabilities developed in FEM and BIEM. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with orthotropic inclusions and voids or isotropic inclusions, and the analysis of plane wave scattering problems in unbounded isotropic matrix with isotropic inclusions and voids, it will be established that this new method is very accurate and effective for solving plane wave scattering problems and plane elastic problems in unbounded solids containing general anisotropic inclusions and voids/cracks or isotropic inclusions.

• 한국강구조학회 논문집
• /
• 제12권2호통권45호
• /
• pp.187-196
• /
• 2000

본 연구의 목적은 비등방성 원통형 쉘이 원통길이방향으로 압축하중을 받는 경우 면외방향 거동의 안정성에 대한 해석이다. 복합재료로 이루어진 비등방성 원통형 쉘의 안정성 해석은 해석적인 방법으로는 해를 얻을 수 없으므로 수치해석 기법중의 하나인 유한차분법을 사용하였다. 원통형 쉘은 기하학적 특성상 원통길이방향의 압축하중을 원주 방향의 면내거동으로 저항하는 구조형식이므로 원주방향 강성변화에 중점을 두고 연구를 수행하였다. 또한 비등방성 원통형 쉘이 원통길이방향으로 압축하중을 받는 경우에 발생하는 거동에 대한 예측이 힘들기 때문에 화이버 보강각도 변화, 곡률변화, 중심각 변화, 형상비 변화에 따른 안정성 문제를 연구하였다. 본 연구의 결과에 의하면 원통길이방향으로 압축하중을 받는 비등방성 원통형 쉘은 원주방향 강성에 의하여 안정성에 큰 변화가 있다는 것을 알 수 있었다. 그러므로 압축하중을 받는 비등방성 원통형 쉘은 원주방향에 대하여 보강하는 것이 쉘 구조의 안정성을 높일 수 있을 것으로 예측된다.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.621-628
• /
• 2004

본 연구에서는 보강판의 좌굴방지를 위해 기존에 주로 사용되는 보강재를 복합재료를 사용하여 대체하는 새로운 개념을 소개한다. 강재 보강재를 복합재료로 대체함으로써 용접의 불편함과 피로 등에 의한 손상 및 부식을 원천적으로 제거할 수 있다. 강판에 접착되는 복합재료는 강판이 좌굴할 때까지 완전히 접착된 것으로 가정하였다. 이렇게 구성되는 판은 길이와 폭 방향으로 변단면의 형태를 가지며 비등방성의 재료특성을 나타낸다. 이러한 비등방성 변단면 판의 좌굴해석을 위해 범용 유한요소 프로그램인 LUSAS를 사용하였으며 여러 가지 매개변수 변화 해석을 통해 비등방성 변단면 판의 좌굴거동 특성을 살펴보았다.

• Steel and Composite Structures
• /
• 제25권3호
• /
• pp.361-374
• /
• 2017

In this study, the influences of triaxial magnetic field on the wave propagation behavior of anisotropic nanoplates are studied. In order to include small scale effects, nonlocal strain gradient theory has been implemented. To study the nanoplate as a continuum model, the three-dimensional elasticity theory is adopted in Cartesian coordinate. In our study, all the elastic constants are considered and assumed to be the functions of (x, y, z), so all kind of anisotropic structures such as hexagonal and trigonal materials can be modeled, too. Moreover, all types of functionally graded structures can be investigated. eigenvalue method is employed and analytical solutions for the wave propagation are obtained. To justify our methodology, our results for the wave propagation of isotropic nanoplates are compared with the results available in the literature and great agreement is achieved. Five different types of anisotropic structures are investigated in present paper and then the influences of wave number, material properties, nonlocal and gradient parameter and uniaxial, biaxial and triaxial magnetic field on the wave propagation analysis of anisotropic nanoplates are presented. From the best knowledge of authors, it is the first time that three-dimensional elasticity theory and nonlocal strain gradient theory are used together with no approximation to derive the governing equations. Moreover, up to now, the effects of triaxial magnetic field have not been studied with considering size effects in nanoplates. According to the lack of any common approximations in the displacement field or in elastic constant, present theory has the potential to be used as a bench mark for future works.

• 응용통계연구
• /
• 제27권5호
• /
• pp.755-771
• /
• 2014

등방성(isotropy)은 공분산 모형(covariance model)에 기반으로 공간 예측(spatial prediction)이라 불리우는 크리깅(kriging) 을 용이하게 수행하기 위한 주요 가정 중의 하나로 알려져있다. 공간 과정에서 등방성이 충족되지 않는 경우에는, 보다 신뢰성 예측을 생성하기 위해 비등방성 공분산 모형(covariance model)과 관련된 모수들(각도 및 비율)를 추정해야 한다. 본 논문에서는 여러 방향의 기하학적 비등방성 모형(geometrically anisotropic covariance models)의 가중 평균으로 표현되는 확장된 형태의 기하학적 비등방성(geometrically extended anisotropic) 공분산모형을 제안한다. 연구에 관심이 되는 모수를 추정하기 위해 최대우도추정법(maximum likelihood estimation method)을 이용하였다. 제안한 모형의 성능을 평가하기 위해 등방성 공분산모형과 기하학적 비등방성 모형을 고려한 모의실험을 수행하였다. 또한 확장된 기하학적 비등방성 모형을 적용한 미세먼지 농도자료 분석을 실시하였다.

• Composites Research
• /
• 제13권1호
• /
• pp.61-68
• /
• 2000

이방성 적층 복합재 판의 과도적인 파동 해석을 위한 새로운 방법을 제시하였다. Gabor wavelet을 사용하는 wavelet 변환을 분산성 굽힘파의 시간-주파수 해석에 적용하였다. 시간-주파수 영역에서 wavelet 변환의 크기의 최대값은 군속도의 도달시간을 나타냄을 보였다. 음향방출원으로서 연필심 파단을 사용하여 준등방성 판과 일방향 보강 적층판에서 실험을 수행하였다. 굽힘파의 분산 예측을 위하여 Mindlin 판이론을 사용하였으며,주파수의 함수로 몇 개의 방향에 대해 측정한 군속도 실험 결과와 잘 일치하였다. 굽힘파의 주파수 의존 도달 시간과 같은 파의군속도 방향의존성을 이용하여 이방성 판에서의 파손 위치를 결정하였으며, 그 결과를 제시하였다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권4호
• /
• pp.211-226
• /
• 2015

Membrane type Mark III cargo containment system (CCS) is considered in this study to investigate its strength capability under applied loads due to liquefied natural gas (LNG) cargo. A rectangular plated structure supported by inner hull structure is exemplified from Mark III CCS according to classification society's guidance and it is assumed as multi-layered structure by stacking plywood, triplex, reinforced polyurethane (PU) foam and series of mastic upon inner hull structure. Commercially available general purpose finite element analysis package is used to have reliable FE models of Mark III CCS plate. The FE models and anisotropic failure criteria such as maximum stress, Hoffman, Hill, Tsai-Wu and Hashin taking into account the direction dependent material properties of Mark III CCS plate components and their material properties considering a wide variation of temperature due to the nature of LNG together form the strength analysis procedure of Mark III CCS plate. Strength capability of Mark III CCS plate is understood by its initial failure and post-initial failure states. Results are represented in terms of failure loads and locations when initial failure and post-initial failures are occurred respectively. From the results the basic design information of Mark III CCS plate is given.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.639-646
• /
• 1995

The objective of this study is to minimize the weight of a damped anisotropic roto-bearing system considering whirl natural frequency and stability. The system is modeled as an assemblage of rigid disks, flexible shafts and discrete bearings. The system design variables are the crosssectional areas of shaft elements and the properties of bearings. To analyze the system, the polynomial method which is derived by rearranging the calculations performed by a transfer matrix method is adopted. For the optimization, the optimization software IDOL (Integrated Design Optimization Library) which is based on the Augmented Lagrange Multiplier (ALM) method is employed. Also, an analytical design sensitivity analysis of the system is used for high accuracy and efficiency. To demonstrate the usefulness of the proposed optimal design program incorporating analysis, design sensitivity analysis, and optimization modules, a damped anisotropic rotor-bearing system is optimized to obtain 34$ weight reduction.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.248-258
• /
• 1992

Three-dimensional rigid-plastic finite element formulation based on the membrane theory was described and a computer program for large deformation analysis was developed. In the formulation, normal and planar anisotropy of sheet material and rotation of the principal axes of anisotropy was taken into consideration. Sheet metal was assumed to be rigid-plastic material obeying Hill's quadratic yield criterion and its associated flow rule. Deep drawing process, as a preliminary test, for normal anisotropic material was analyzed in order to examine the validity of developed finite element program. The results were consistent with the existing finite element solutions or experimental data. The present study was mainly concerned with the influence of planar anisotropy on deformation behaviour. Finite element analysis and experiment were carried out for the whole process of deep drawing of planar anisotropic material. The computational and experimental results on the shape of ear, strain distribution and punch load were in good agreement.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.15-30
• /
• 2020

The probabilistic bearing capacity of a strip footing placed on the edge of a purely cohesive reinforced soil slope is computed by combining lower bound finite element limit analysis technique with random field method and Monte Carlo simulation technique. To simulate actual field condition, anisotropic random field model of undrained soil shear strength is generated by using the Cholesky-Decomposition method. With the inclusion of a single layer of reinforcement, dimensionless bearing capacity factor, N always increases in both deterministic and probabilistic analysis. As the coefficient of variation of the undrained soil shear strength increases, the mean N value in both unreinforced and reinforced slopes reduces for particular values of correlation length in horizontal and vertical directions. For smaller correlation lengths, the mean N value of unreinforced and reinforced slopes is always lower than the deterministic solutions. However, with the increment in the correlation lengths, this difference reduces and at a higher correlation length, both the deterministic and probabilistic mean values become almost equal. Providing reinforcement under footing subjected to eccentric load is found to be an efficient solution. However, both the deterministic and probabilistic bearing capacity for unreinforced and reinforced slopes reduces with the consideration of loading eccentricity.