• Proceedings of the Korean Geotechical Society Conference
• /
• 1989.10a
• /
• pp.1.3-25
• /
• 1989

This paper describes procedures and the results of mineralogical, fabric and pore sixte analyses perforied on four shales to understand time-dependent deforiation behav iour of swell ins shales better. Mineralogical compositions of theme shales are eBtablished froi the results of X-ray diffraction snalysis and chemical analyses. The importance of the fabric in the understanding of swelling behaviour of shales is demonstrated using Scanning Electron Microscope (SRI). The change in pore sixte distribution during the process of swelling is investigated by measuring pore size distribution before and after free swell test. The results Of the Present study imply that the swelling of Shales studied is not attributed to minerals like pyritei anhydrite or swelling clay minerals. The anisotropic swelling behaviour of shales studied ray be explained by fabrics of theme shales and the difference in them. The swelling of theme shales is found to be accoipanied by increase in the volute of pores.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.599-609
• /
• 1999

Talc durg has been used at Oriental Medical Hospital of Kyung San University, and was analysed for mineralogical and geochemical studies. It consists mainly of talc with small amount of tremolite, dolomite and bursite, and its chemical compositions of MgO 31.65% and $SiO_2$ 61.0%, and cotain less inpurtities. Moreover, talc from the Dong Yang Talc mine is associated with calcite, gypsum and anhydrite, which belong to more soluble mineral drugs than talc, and contains Ca and Fe. These elements may give at least medical medical to talc durg as in the case of actinolite. Therfore, talc of high quality from the Dong Yang Tacl Mine may be used instead of imported expensive talc durg. Diagrams of log $a_{Mg^{2+}}$-pH and log $a_{Mg^{2+}}/a{\array{2\\H^+} $-log $a_{H_4SiO_4}$- may be used as basic data to predict and examine soluble contents of durg for medical experiments.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.2
• /
• pp.53-66
• /
• 2008

There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

• Resources Recycling
• /
• v.7 no.5
• /
• pp.33-40
• /
• 1998

The formation reation of anhydrite (CaSO$_{4}$) depends upon the amount and velocity of the SO$_{3}$(g) and CaO(s) produced in the process of the thermal decomposition of alunite[K$_{2}SO_{4}{\cdot}Al_{2}(SO_{4})_{3}{\cdot}4Al(OH)_{3}$] and limestone (CaCO$_{3}$) respectively. Therefore, this study had carried out to investigate the amount and velocity of SO$_{3}$(g) produced by roasting alunite and pyrolytic materials. In air, alunite was transfouned into KAl(SO$_{4})_{2}$ and Al$_{2}O_{3}$ by dehydration at 500~580$^{\circ}C$. The dehydration velocity of alunite was found to be kt=(1-(1-${\alpha})^{1/3})^{2}$, the activation energy, 73.01 kcal/mol. SO$_{3}$(g) ware slowly produced by the thermal decomposition of KAl(SO$_{2})_{2}$, at 580~700$^{\circ}C$, rapidly, at 700~780$^{\circ}C$, The pyrolysis velocity of KAl(SO$_{4})_{2}$ was found to be kt=1-(1-${\alpha})^{1/1}$; activation energy, 66.84kcal/mol. The SiO$_{2}$ and kaolinite in alunite ore scarcely affected the temperature and velocity in which SO$_{3}$(g) were produced.

• The Korean Journal of Petroleum Geology
• /
• v.3 no.1 s.4
• /
• pp.16-27
• /
• 1995

The Early Miocene Temblor Formation forms an important sandstone reservoir at Kettleman North Dome oil field, California. Sandstones are mostly arkosic in composition except deepest sandstones containing much volcanic rock fragments. Arranged in paragenetic sequence prior to feldspar alteration, the Temblor sandstones contain cements of early calcite, dolomite, quartz, albite, mixed-layer ohloriteismectite (C/S) and smectite, and anhydrite. Diagenetic changes associated with feldspar are albitization of plagioclase, late calcite and laumontite cementation and grain replacement, plagioclase dissolution, and kaolinite cementation. Plagioclase albitization and late calcite and laumontite cementation in Temblor sandstones occurred at the time of maximum burial with temperatures up to $130^{\circ}C$. Volcanic plagioclases were selectively albitized. Most diagenetic changes are interpreted to have occurred before the maior uplift which occurred within the last one million years ago. Since then to the time of hydrocarbon emplacement plagioclase dissolution and kaolinite cementation occurred. This reaction occurred in relatively closed system due to the occurrence of kaolinite next to the site of plagioclase dissolution. Unaltered part of volcanic plagioclase and plutonic plagioclase which escaped albitization during maximum burial were preferentially dissolved to make plagioclase porosity. Secondary porosity resulting from dissolution of plagioclase and carbonate and anhydrite cements was mainly produced by formation waters containing organic acids released during atagenesis of organic matter.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.2
• /
• pp.115-125
• /
• 2020

This study was aimed to examine inorganic fouling and fouling reduction method in direct contact membrane distillation(DCMD) process. Synthetic seawater of NaCl solution with CaCO₃ and CaSO₄ was used for this purpose. It was found in this study that both CaCO₃ and CaSO₄ precipitates formed at the membrane surface. More fouling was observed with CaSO₄(anhydrite) and CaSO₄·0.5H₂O(bassanite) than CaSO₄·2H₂O(gypsum). CaCO₃ and gypsum were detected at the membrane surface when concentrates of SWRO(seawater reverse osmosis) were treated by the DCMD process, while gypsum was found with MED(multi effect distillation) concentrates. Air backwash(inside to out) was found more effective in fouling reduction than air scouring.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.193-200
• /
• 2008

We tried to evaporate and dry the moisture contained Flue gas desulfurization gypsum and phosphogypsum by using the microwave directly. In the result of the heating to the Flue gas desulfurization gypsum and phosphogypsum using 2.45 GHz microwave which was created by magnetron 700 W, 1,000 W and 1,700 W, respectively. According to the increasing the microwave output intensity from 700 W to 1,700 W, the evaporate time of moisture was shortened from 10 to 3 minutes. Gypsum were changed to calcium sulfate hemihydrate. However, ${\beta}$-calcium sulfate hemi-hydrate were not changed to anhydrite.

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.450-457
• /
• 2017

Waste Isolation Pilot Plant repository releases are evaluated through the application of modified parameters to simulate accelerated creep closure, include capillary pressure effects on relative permeability, and increase brine and gas saturation in the operations and experimental (OPS/EXP) areas. The modifications to the repository model result in increased pressures and decreased brine saturations in waste areas and increased pressures and brine saturations in the OPS/EXP areas. Brine flows up the borehole during a hypothetical drilling intrusion are nearly identical and brine flows up the shaft are decreased. The modified parameters essentially halt the flow of gas from the southern waste areas to the northern nonwaste areas, except as transported through the marker beds and anhydrite layers. The combination of slightly increased waste region pressures and very slightly decreased brine saturations result in a modest increase in spallings and no significant effect on direct brine releases, with total releases from the Culebra and cutting and caving releases unaffected. Overall, the effects on total high-probability mean releases from the repository are insignificant, with total low-probability mean releases minimally increased. It is concluded that the modified OPS/EXP area parameters have an insignificant effect on the prediction of total releases.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.59-66
• /
• 2012

Autoclaved Lightweight Concrete(ALC) features such as a high performance insulation, the fire resistance, the advantage of easy handing construction, and lightweight panels applied the curtain wall system. ALC materials are certified as non-toxic environmental and eco-friendly productions. But ALC external panels mixed with blast furnace slag pounder and silica fume have to be coated with a stucco compound or plaster because of resisting the ambient environment. This study is that mixing tests to evaluate a performance analysis of exterior paints to be make-up pigments(organic or inorganic) coated with panel surface. Testing compared by KS F 2476; flow test, KS F 2426; compression strength test, KS F 2762; bond strength test. In results, the case of the inorganic binder, ratio of alumina cement : anhydrite is 90:10 to 80:20 at the highest level of intensity. In the case of the organic binder, adhesive strength rating at surface of ALC, the pullout strength is below 0.5 $N/mm^2$ but the normal concrete is over 2.0$N/mm^2$. A contents ratio of EVA resin is more than 3% and then bond strength is effectively.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.402-411
• /
• 2017

Combined LIBS-Raman spectroscopy has been widely studied, due to its complementary capabilities as an elemental analyzer that can acquire signals of atoms, ions, and molecules. In this study, the classification of polymorphs was performed by laser-induced breakdown spectroscopy (LIBS) to overcome the limitation in molecular analysis; the results were verified by Raman spectroscopy. LIBS signals of the $CaCO_3$ polymorphs calcite and aragonite, and $CaSO_4{\cdot}2H_2O$ (gypsum) and $CaSO_4$ (anhydrite), were acquired using a Nd:YAG laser (532 nm, 6 ns). While the molecular study was performed using Raman spectroscopy, LIBS could also provide sufficient key data for classifying samples containing different molecular densities and structures, using the peculiar signal ratio of $5s{\rightarrow}4p$ for the orbital transition of two polymorphs that contain Ca. The basic principle was analyzed by electronic motion in plasma and electronic transition in atoms or ions. The key factors for the classification of polymorphs were the different electron quantities in the unit-cell volume of each sample, and the selection rule in electric-dipole transitions. The present work has extended the capabilities of LIBS in molecular analysis, as well as in atomic and ionic analysis.