• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.247-251
• /
• 2013

The objective of present study was to develop a simultaneous determination method of 5 medical compounds, including beclomethasone, dexamethasone, prednisolone, ketoprofen, phenylbutazone in foods, using LC-MS/MS. To optimize MS analytical condition of 5 compounds, each parameter was established by MRM mode. The chromatographic separation was achieved on a C18 column successfully, with a mobile phase made up of A (0.1% formic acid) and B (0.1% formic acid in acetonitrile), at a flow rate of 0.3 mL/min for 17 min with a gradient elution. LOD and LOQ of 5 compounds were in the range of 0.40~4.60 ng/mL and 0.81~11.46 ng/mL, respectively. As a result of analyzing the three concentrations of the standard mixture added to blank samples, the results showed that the mean recovery rate of 5 compounds was in the range of 81.52~103.83%, and RSD (%) of Intra- and Inter-day assay were 0.52-10.45. Since relatively fine selectivity, accuracy and reproducibility were shown in this qualified experimental method, it could be utilized efficiently to investigating those 5 compounds to see if it is added to food products illegally.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1361-1370
• /
• 2011

Antioxidant and anti-inflammatory activities of eugenol and its derivatives from clove (Eugenia caryophyllata Thunb.) were evaluated using in vitro assay systems by measuring 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical, cyclooxygenase-2 (COX-2), and 15-lipoxygenase (15-LOX). Among eight different crude medicinal drugs tested, volatile extracts of clove extracted by steam distillation extraction (SDE) showed potent DPPH radical scavenging activity ($IC_{50}$=8.85 ${\mu}g/mL$) as well as strong inhibitory activity against COX-2 (58.15%) and 15-LOX (86.15%) at 10 ${\mu}g/mL$ and 25 ${\mu}g/mL$, respectively. Major volatile components of clove were identified as eugenol, trans-caryophyllene, and acetyleugenol by GC-MS analysis. Out of three eugenol derivatives, eugenol, methyl eugenol, and acetyl eugenol, eugenol showed the strongest DPPH radical scavenging activity and COX-2 inhibitory activity, whereas methyl eugenol exhibited the strongest 15-LOX inhibitory activity. Finally, the contents of the three eugenol derivatives in clove were quantified by analytical HPLC. Contents of eugenol and acetyl eugenol in clove were 6.95% and 1.85% per dry weight, respectively. These results suggest that eugenol and its derivatives in steam distilled extract of clove may be useful as potential antioxidant and anti-inflammatory agents.

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.244-252
• /
• 2005

This study was performed far development of new analytical method of beet red in foods. In this study, analysis of beet red in foods has been carried out by detection of betanine and isobetanine, the main color component of beet red as indicator compounds. The qualitative analysis technique consisted of clean-up of the colors with a $C_{18}$ cartridge, separation of the colors by cellulose TLC plate using acetone:3-methyl-1-butanol:distilled water (7:7:6) as a solvent system. Also, the quantitative analysis was performed using X-terra RP at wavelength 538 nm and $0.1\%$ phosphoric acid : methanol (90:10) as a solvent. The quantitative results of beet .ed were as follows:900.22$\∼$27701.60 $\mu$g/g for 60 item in nutrient supplement food, $21.95\∼713.40{\mu}g/g$ for 30 items and N.D. for 18 items in cindy, and $155.85{\∼}505.37{\mu}g/g$ for 12 items in ice creams, $43.52\∼64.75{\mu}g/g$ for 18 items and N.D. for 54 item in sauce, N.D. for 12 items in retort food.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.1
• /
• pp.62-79
• /
• 1994

The quanttative and structural analysis of the binary standard mixtures of albite and quartz, and microcline and albite were carried out using the Rietveld refinement method in order to investigate the accuracy and precision of the method. The quantitative analysis using the Rietveld method results in a standard deviation of 4 wt % for the albite-quartz standard mixtures and 1 wt % for the microcline-albite standard mixtures, suggesting that its accuracy is far better than that of the conventional XRD method in which only a few selected peaks are utilized. Furthermore, the unit-cell parameters of component minerals in mixtures were also estimated accurately during the analysis. It was observed that the refined weight fractions deviate systematically from their measured values when the method is applied to the mixtures that contain minerals with different degrees of preferred orientation, such as albite-quartz mixtures. The preferred orientation parameters and R-values suggest that the systematic deviation is caused as a result of the preferred orientation effect of feldspar crystallites. It is evident that the preferred orientation corrections are of help for the accurate determination of unit-cell parameters, although they may not improve the result of quantitative analysis significantly. The refined weight fraction of the mineral with higher degree of preferred orientation in mixture is greater than the measured one. This is apparently caused by the effect of geometry of feldspar crystallites in the surface of the mounted sample. The Rietveld refinement method minimizes the problems inherent in the traditional XRD methods, such as the line overlap, primary extinction, and preferred orientation effect, by fitting every data point in a whole pattern explicitly. Furthermore, accurate unit-cell parameters as well as scale factors that can be obtained from the Rietveld refinement are used for the quqantification. The present stdudy demonstrates that the Rietveld method yields far more accurate analytical result than the conventional XRD quantitative analysis method does.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.167-176
• /
• 2018

It is necessary to consider various geological parameters such as lithology, geological structure, earthquake, hydraulic geology, geochemistry, geological engineering, and geothermal in order to select potential sites for HLW(high-level radioactive waste) geological disposal. In particular, the geological lineament reflects the characteristics of various geological parameters and can be used as an important criterion for site selecting such as nuclear power plants and HLW repositories. In this paper, the Finnish lineament classification method for HLW disposal site selection through the lineament analysis was applied to the lineament data in the Korean peninsula. For this purpose, we used previous lineament data from the KIGAM(Korea Institute of Geoscience and Mineral Resources) and obtained new lineament data from the field geologists such as structural geologist, paleoseismologist, and geomorphologist. To ensure the reliability of the new lineament analysis data, we used high-resolution satellite images and hill-shade relief maps which were constructed by a digital elevation model. In the prevailing direction analysis from the acquired lineament data, the NNE-SSW direction was the most dominant, but the ENE-WSW and NNW-SSE directions also showed highly frequency depending on the experts. Applying the Finnish classification method, the geometrical development characteristics of the lineament corresponding to the Class 1 and 2 used for the wide-wide candidate site were compared. As a result of direction analysis for Class 1, the NNE-SSW direction was the most dominant and the WNW-ESE direction also showed a high frequency. In the case of Class 2, the NNE-SSW is the most prevalent and WNW-ESE or ENE-WSW direction also had highly frequency depending on the experts. Different lineament analysis results based on the same data are interpreted as a result of subjective experience and analytical criteria from the every experts. Therefore, it is necessary to establish integrated criteria and consider geophysical data for the publication of reliable nation-wide lineament map.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.351-360
• /
• 2004

An orbit propagation software for the Mars orbiting spacecraft has been developed and verified in preparations for the future Korean Mars missions. Dynamic model for Mars orbiting spacecraft has been studied, and Mars centered coordinate systems are utilized to express spacecraft state vectors. Coordinate corrections to the Mars centered coordinate system have been made to adjust the effects caused by Mars precession and nutation. After spacecraft enters Sphere of Influence (SOI) of the Mars, the spacecraft experiences various perturbation effects as it approaches to Mars. Every possible perturbation effect is considered during integrations of spacecraft state vectors. The Mars50c gravity field model and the Mars-GRAM 2001 model are used to compute perturbation effects due to Mars gravity field and Mars atmospheric drag, respectively. To compute exact locations of other planets, JPL's DE405 ephemerides are used. Phobos and Deimos's ephemeris are computed using analytical method because their informations are not released with DE405. Mars Global Surveyor's mapping orbital data are used to verify the developed propagator performances. After one Martian day propagation (12 orbital periods), the results show about maximum ${\pm}5$ meter errors, in every position state components(radial, cross-track and along-track), when compared to these from the Astrogator propagation in the Satellite Tool Kit. This result shows high reliability of the developed software which can be used to design near Mars missions for Korea, in future.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.35-42
• /
• 2015

This study was performed for both evaluating the safety of other processed products and providing basic information for making the general standard for contaminants in the category of other processed products. We analyzed the contents of three heavy metals, thirty six anti-impotence drugs and their analogues, three anti-obesity drugs and their analogues, twenty eight steroid drugs and their analogues, collecting in Incheon Metropolitan City. Any illegal compound was not detected in those products. However the contents of lead, cadmium and mercury of those products were at the range of 0.001-13.390 mg/kg, 0.03-1.231 mg/kg and 0.001-0.650 mg/kg respectively. Because there are no standards of heavy metals against other processed products, we compared the analytical results with relevant standards of both S. Korea and foreign countries. As a result, two products exceeded the relevant standards of lead, and other two products exceeded the relevant standards of mercury. The relative hazards compared to PTWI of FAO/WHO (Codex), Seafoods-pajeonmix, Perilla seed powder exceeded PTWI standards 0.214. The compulsory standards of each food product are determined by the category of the products. Because there is no standard of heavy metals in the category of other processed products in S. Korea, any food products registered as other processed product by manufacturer are free with those standards. Abusing similar problems on the categorization of food products could cause consumers' health problem. To prevent these problems, detail regulations on the categorization of food products have to be introduced.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.375-388
• /
• 2017

In order to solve the traffic congest and environmental issues, small-cross section tunnel for small car only is increasing, but there is not standard for installation of disaster prevention facility. In this study, in order to investigate the behavioral characteristics of thermal environment and smoke in a small cross section tunnels with a large port exhaust ventilation system, the A86, the U-Smartway and the Seobu moterawy tunnel, Temperature and CO concentration in case of fire according to cross sectional area, heat release rate and exhaust air flow rate were analyzed by numerical analysis and the results were as follows. As the cross-sectional area of the tunnel decreases, the temperature of the fire zone increases and the rate of temperature rise is not significantly affected by heat release rate. However, there is a difference depending on the change of the exhaust air flow rate. In the case of applying the exhaust air flow rate $Q_3+2.5Ar$ of the large port exhaust ventilation system, the temperature of the fire zone was 7.1 times for A86 ($Ar=25.3m^2$) and 5.4 time for U-smartway ($Ar=37.32m^2$) by Seobu moterway tunnel ($Ar=46.67m^2$). The CO concentration of fire zone also showed the same tendency. The A86 tunnels were 10.7 times and the U-Smartways were 9.5 times more than the Seobu moterway. Therefore, in the case of a small section tunnel, the thermal environment and noxious gas concentration due to the reduction of the cross-sectional area are expected to increase significantly more than the cross-sectional reduction rate.

• Journal of Animal Science and Technology
• /
• v.44 no.4
• /
• pp.453-458
• /
• 2002

In order to search for reliable rapid methods of estimating bacterial counts in pork, this study was tried to measure resazurin reduction time which is simple in experimental method, low in analytical cost, able to estimate bacterial count within short time. The results were summarized as follows; Correlation coefficient between initial bacterial log count(25$^{\circ}C$/72hr, Y) and resazurin reduction time(X) from blue color to pink color during incubation at 25$^{\circ}C$ and 30$^{\circ}C$ was higher than other conditions as -0.95 and -0.94, respectively. Considering correlation coefficient and reduction time, incubation temperature was compatible at 30$^{\circ}C$, and regression equation(RE) was Y = -0.4386X + 7.7870. At a bacterial load of $10^2$cfu/$cm^2$, $10^3$cfu/$cm^2$ and $10^4$cfu/$cm^2$ in pork, reduction time was 13.2hr, 10.9hr and 8.6hr, respectively. Correlation coefficient between initial bacterial log count(30$^{\circ}C$/72hr, Y) and resazurin reduction time(X) from blue color to pink color during incubation at 30$^{\circ}C$ was highest among other conditions as -0.93, and RE was Y = -0.4171X + 7.5540. At a bacterial load of $10^2$cfu/$cm^2$, $10^3cfu/$cm^2$ and $10^4cfu/$cm^2$ in pork, reduction time was 13.3hr, 10.9hr and 8.5hr, respectively. Correlation coefficient between initial bacterial log count(35$^{\circ}C$/72hr, Y) and resazurin reduction time(X) from blue color to pink color during incubation at 30$^{\circ}C$ was highest among other conditions as -0.93, and RE was Y = -0.3514X + 6.7513. At a bacterial load of $10^2$cfu/$cm^2$, $10^3$cfu/$cm^2$ and $10^4$cfu/$cm^2$ in pork, reduction time was 13.5hr, 10.7hr and 7.8hr, respectively.

• Journal of Distribution Science
• /
• v.16 no.5
• /
• pp.83-90
• /
• 2018

Purpose - Journals of Korea Distribution Science Association (KODISA) made great efforts in responding to the constant shifts in academic paradigms and in producing synergetic effects among KODISA journals to achieve the goal of maintaining their status in the world's reputable scholarly journals. The aim of this study is to analyze the current practice and performance of KODISA journals and develop strategies that will continuously meet and respond to the changes and success in the future. Research design, data, and methodology - This is a case study, an analytical approach, which focuses on analyzing current and previous strategies, practices, and performances of the four major journals of KODISA and the association. The organizational structure, including election and terms of KODISA officers, new membership, and members of editorial board, is discussed and analyzed. The citation, submission, publication, and rejection rates of all four journals are examined, and the progress, including the status of indexing of each journal, is discussed. Results - The analysis indicates that KODISA has significantly invested its resources into improving its journals and attracting new members. The analysis also shows the strategy of the organizational structure, which includes election and terms of officers and editorial board members that implemented over the years, was successful. Both Journal of Distribution Science (JDS) and Journal of Finance, Economics, and Business (JAFEB) are indexed in SCOPUS, with East Asian Journal of Business Management (EAJBM) in the final stage of the SCOPUS indexing evaluation, and International Journal of Industrial Distribution and Business (IJIDB) will complete and submit their indexing evaluation materials to SCOPUS this summer. Conclusions - The success and progress of KODISA and its journals clearly support the need for continuous development, analysis, revision, and implementation of strategies. Based on the analysis, conducting the annual performance reviews of the association and its journals and planning and strategizing based on the reviews since 2011 have greatly contributed to the overall success. In terms of meeting the short term strategy, KODISA has to continue developing relationships with relevant and appropriate scholarly/academic associations to expand the scope of its business, establishing independence of each journal and its respective procedures and practices and improving the quality of the journals and their publications through KODISA's international conferences.