• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.82-91
• /
• 1997

The major objective of this study is to establish analytical technique in order to analyze the behaviour of semi-solid material considering induction heating of the billet. Induction heating process is analyzed by using commerical finite element software. ANSYS. The finite element program, SFAC2D, for the simulation of deformation in semi-solid state is developed in the present study. The semi-solid behaviour is described by a viscoplastic model for the solid phase, and by the Darcy's law for the liquid flow. Simple compression and closed-die compression process considering induction heating are analyzed, and also it is found that the distribution of initial solid fraction of the billet has an important effect on deformation behaviour of semi-solid material. In order to verify the effectiveness of proposed analytical technique the simulation result is compared with experimental result.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.948-951
• /
• 2000

This paper presents the analytical and experimental methodology for the prediction of aerosol concentration and size distribution due to cutting fluid atomization mechanism in turnining operation. The established analytical model which is based on atomization theory analyzes the cutting fluid motion and aerosol generation in machining process. The impinging and evaporation experiments were performed to know the particle size and evaporation rate of cutting fluid. The predictive models can be used as a basis for environmental impact analysis on the shop floor. It can be also facilitate the optimization of cutting fluid usage in achieving a balanced consideration of productivity and environmental consciousness.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.163-164
• /
• 2006

In this paper, an analytical laser ablation model with Maxwell equation will be addressed by considering relationship between laser ablation and material. The Maxwell equation consists of four equations: two Gauss laws for electric and magnetic fields, Faraday's law, and Ampere's law. This analytical model will be calculated by employing Finite Difference Time Domain (FDTD). This method also makes it possible to simulate the laser beam propagation in a wide range of materials, such as metals, semiconductors, and dielectrics. Therefore, in this study, a numerical model for short pulse laser interaction with materials is developed, focusing on the accurate description of laser beam propagation and ablation process into the material with each pulse.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.113-114
• /
• 2006

Vibration of a non-linear system under random excitations was evaluated by probabilistic methods. The non-linear characteristic terms of a system structure were quasi-linearized and excitation terms were remained as they were. An analytical method where the square mean of error was minimized was used. An alternative method was an energy method where the damping energy and restoring energy of the linearized system were equalized to those of the original non-linear system. The numerical results were compared with those obtained by Monte Carlo simulation. The comparison showed the results obtained by Monte Carlo simulation located between those by the analytical method and those by the energy method.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.102-110
• /
• 2001

In this paper, methods to analyze wire sweep and paddle shift during the semiconductor ship-encapsulation process have been studied. The analysis of wire sweep includes flow-field analysis in a complicated geometry, drag-force calculation for given flow of fluid, and wire-deformation calculation for given loads. The paddle-shift analysis is used to analyze the deformation of the paddle due to the pressure difference in two cavities. the analysis is done using either analytical solutions or numerical simulation. The analytical solution is used for rough but fast calculation of wire sweep. The numerical solution is used for more accurate calculation of wire-sweep. The numerical results of wire sweep show good agreements with the experimental ones.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.153-158
• /
• 1998

In this paper, a theoretical analysis is presented on the mechanics of the grinding by hemispheric type electroplated CBN wheel. The grinding forces acting on a single grain were calculated from its geometry by assuming the abrasive grain is spherical. Then. the total grinding forces were obtained by estimating the number of acting abrasive grains and the area of contact. The model includes the grinding variables such as wheel speed. feed speed. depth of cut, and grinding wheel positions. Experiments were also carried out to compare with the analytical results. The experimental results were found to be in good agreement with the analytical ones.

• 분석과학
• /
• 제34권4호
• /
• pp.180-190
• /
• 2021

This study compared the efficacy of chiral GC and chiral HPLC for the analysis of nicotine. To develop a suitable dispersive liquid-liquid microextraction (DLLME) method, the following parameters were optimized: pH, extraction solvent, dispersive solvent, type and quantity of salt, and laboratory temperature. The validation of the method was carried out by the established HPLC method. The LODs were 0.11 ㎍/mL and 0.17 ㎍/mL for the (S)- and (R)- enantiomers, respectively. The LOQs were 0.30 ㎍/mL and 0.44 ㎍/mL, respectively. The optimal calibration range was between 0.30-18 ㎍/mL and 0.44-4.40 ㎍/mL, respectively, and the correlation coefficient (r²) was 0.9978-0.9996. The intra-day accuracy was 79.9-110.6 %, and the intra-day precision was 1.3-12.0 %. The inter-day accuracy was 87.8-108.0 %, and the inter-day precision was 4.0-12.8 %. E-liquid and biological fluids (urine and saliva) were analyzed using the established method.

• 한국측량학회지
• /
• 제1권2호
• /
• pp.23-29
• /
• 1983

Degradation of image caused by relative motion between the object and the imaging system (like a camera with its platform) is detrimental to precision photogrammetry. Principal modes of relative motion are identified. The discussion is, however, concentrated on the systematic motions, translatory and rotatory. Various analogical approaches of compensating for the image motion are cited. An analytical-computational approach is presented. This one considers the relationship of transformation bet ween the image and the object, known as the collinearity condition. The standard forms of collinearity condition equations are presented. Augmentation of these equations with regard to both translatory and rotatory motions are expounded. With ever increasing use of high speed computers (as well as analytical plotters in the realm of photogrammetry), this approach seems to be more costeffective and seems to yield better precision in the long run than other approaches that concentrate on analogical corrections to the image itself.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.102-112
• /
• 1995

Temperature distribution on the rake face and flank face in orthogonal turning with cutting tool of high speed steel is studied by using a finite element method and experiments. Experiments are carried out to verify the validity of the temperature measurement by using a thermoelectric couple junction imbedded in a cutting tool of high speed steel. Good agreement is obtained between the analytical results and the experimental ones for the temperature distributions on both the rake face and flank face of cutting tool with high speed steel. The analytical results show that the temperature on the top flank face of a tool is higher than it on the top rake face of the tool because of the difference of the friction velocity on each face of the tool.

• 분석과학
• /
• 제30권3호
• /
• pp.154-158
• /
• 2017

The Korean Pharmacopoeia (KP XI), British Pharmacopoeia (BP 2013) and Japanese Pharmacopoeia contain monographs for the quality control of raw fusidate sodium and its formulations using high performance liquid chromatography (HPLC). However, the assay method for the determination of fusidate sodium in commercial tablets is titration which is less specific than HPLC. In this study, we present an alternative HPLC method for quantitation of fusidate sodium in tablets. Method validation was performed to determine linearity, precision, accuracy, system suitability, and robustness. The linearity of calibration curves in the desired concentration range was high ($r^2=0.9999$), while the RSDs for intra- and inter-day precision were 0.25-0.37 % and 0.11-0.60 %, respectively. Accuracies ranged from 99.46-100.85 %. Since the system suitability, intermediate-precision and robustness of the assay were satisfactory, this method will be a valuable addition to the Korean Pharmacopoeia (KP XI).