• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1226-1228
• /
• 2002

Permanent magnet is applied to the mover of eddy current braking system for high speed. On the analytical 2D field solutions considering end effect, this paper deals with the magnetic field, and forces according to the secondary magnet array. Comparisons between analytical results and experimental results are also presented.

• 전기의세계
• /
• 제14권6호
• /
• pp.1-7
• /
• 1965

This paper provides the analysis of the differential amplifier using the insulated gate, metala-oxide-semiconductor type field-effect-transistor(MOS FET), for its active element and the power drift of the amplifer. From these analytical considerations some design standardsn were found for the MOS FET differential amplifier available for the measurement of the very small current (pico-ampare range). A differential amplifier was designed and built in the view of above considerations. Its equivalent input gate voltages of the thermal drift and the power drift were 0.57mV/.deg. C in the range 25.deg. C-60.deg. C and 8.8mV/V in the range of 20% drift of its orginal value, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.792-793
• /
• 2015

This paper present a general computation taking into account the slotting effect on the magnetic field due to permanent magnet in surface mounted permanent magnet machine. The analytical method is based on the solution of Laplace's and Poisson's equations (by the separation of variables technique) for each subdomain, i.e., magnets, air gap, and slots. The general solution is obtained using boundary and continuity conditions. The analytical results are in very good agreement with those obtained by the FEA, considering both amplitude and waveform.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.102-110
• /
• 2001

In this paper, methods to analyze wire sweep and paddle shift during the semiconductor ship-encapsulation process have been studied. The analysis of wire sweep includes flow-field analysis in a complicated geometry, drag-force calculation for given flow of fluid, and wire-deformation calculation for given loads. The paddle-shift analysis is used to analyze the deformation of the paddle due to the pressure difference in two cavities. the analysis is done using either analytical solutions or numerical simulation. The analytical solution is used for rough but fast calculation of wire sweep. The numerical solution is used for more accurate calculation of wire-sweep. The numerical results of wire sweep show good agreements with the experimental ones.

• 대한공업교육학회지
• /
• 제40권1호
• /
• pp.142-162
• /
• 2015

본 연구는 전기공사 현장대리인의 역할 및 역량을 도출하고, 현업에 있는 현장대리인의 교육 요구도를 확인하여 향후 국내기업에서 현장대리인이 성공적인 역할을 수행하기 위한 기초자료와 시사점을 제공하는데 그 목적이 있다. 연구목적을 달성하기 위해 (1) 전기공사 현장대리인의 역할 분석, (2) 전기공사 현장대리인의 역량 분석, (3) 전기공사 현장대리인의 역량에 대한 교육 요구분석의 3단계로 연구절차를 설정하였다. 연구방법은 전기공사 현장대리인 전문가 10명에 대한 포커스그룹 인터뷰를 수행하였고, 현업에 종사하고 있는 현장대리인을 대상으로 설문조사를 실시하였다. 요구분석은 현장대리인의 종요도와 현재 수준 간의 차이를 t 검정으로 분석하고, 역량 중요도와 현재수준에 대한 인식차이를 Borich 공식을 활용하여 도출하였으며, The Locus for Focus 모델을 통해 역량 중요도가 높고 불일치수준이 높은 역량을 확인하여 우선순위를 결정하였다. 본 연구의 결과는 다음과 같다. 첫째, 전기공사 현장대리인의 역할은 현장조사자, 서류작성자, 대관업무자 등 13개가 도출되었다. 둘째, 전기공사 현장대리인의 역량은 의사소통능력, 협력적 태도 등 총 16개 역량이 필요한 것으로 도출되었다. 현장대리인의 중요도 인식순위는 의사결정력, 의사소통능력, 실천력, 시간관리능력, 분석적사고 순으로 높게 나타났다. 셋째, 16개의 역량에 대한 현재수준과 중요도의 차이를 분석한 결과 통계적으로 모두 유의미한 차이를 보이고 있고, Borich 요구도 분석 결과 1순위로 요구되는 역량은 '의사소통능력'이었고, '실천력', '갈등관리능력', '분석적사고', '시간관리능력' 순이었다. 또한, The Locus for Focus 모델 분석 결과 제 1사분면(HH)에 포함된 역량은 '의사소통능력', '분석적사고', '의사결정력', '전문성', '시간관리능력', '실천력', '업무추진력'으로 7개 역량에 요구가 높은 것으로 나타났다. 이에 최우선 순위군은 Borich 요구도와 The Locus for Focus 모델에서 공통적으로 나타난 '의사소통능력', '분석적사고', '시간관리능력', '실천력', '업무추진력' 5개 항목이었고, '의사결정력', '전문성', '갈등관리능력', '부하육성' 4개 항목은 차순위 군으로 분석되었다.

• 방송공학회논문지
• /
• 제16권5호
• /
• pp.824-833
• /
• 2011

In this paper, using the Rec. ITU-R P.1546 explaining a propagation prediction model in the VHF and UHF bands, we propose the analytical methodology for calculating the service distance and field strength for analogue and digital TV receivers. From the derived formulation of the receiver field strength, some computation results are presented and discussed in terms of the equivalent level of service caused by analogue to digital TV conversion. The suggested method is also applicable to the analysis of frequency coordination or compatibility from unwanted signal in VHF and UHF bands.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.139-144
• /
• 1999

There have been many studies for heat transfer enhancement. Particularly, the study of flow in heat exchangers which have fin device has been main theme in heat transfer area. Practically, the circular tube which has internal fins is widely used for developing heat transfer rate. In this study, flow and heat transfer analysis of the circular tube with fins are investigated. The height and the number of fins are arbitrary. The flow field is assumed to be laminar. The conformal mapping is used for analytic solution of the laminar flow field. Discretization of governing equation, namely, FDM was used for numerical analysis. The velocity field, flow rate and shear stress are calculated for some numbers of fins in circular tube and for some heights of fin. Temperature fields are plotted along the tube length. It can be shown that the numerical solution agrees with the analytical solution.

• Structural Engineering and Mechanics
• /
• 제31권5호
• /
• pp.507-526
• /
• 2009

Based on numerical and experimental methods, a systematic structural evaluation of a steel natatorium in service was carried out in detail in this paper. Planning of inspection tasks was proposed firstly according to some national codes in China in order to obtain the economic and reliable results. The field visual inspections and static computation were conducted in turn under in-service environmental conditions. Further a three-dimensional finite element model was developed according to its factual geometry properties obtained from the field inspection. An analytical modal analysis was performed to provide the analytical modal properties. The field vibration tests on the natatorium were conducted and then two different system identification methods were used to obtain the dynamic characteristics of the natatorium. A good correlation was achieved in results obtained from the two system identification methods and the finite element method (FEM). The numerical and experimental results demonstrated that the main structure of the natatorium in its present status is safe and it still satisfies the demand of the national codes in China. But the roof system such as purlines and skeletons must be removed and rebuilt completely. Moreover the system identification results showed that field vibration test is sufficient to identify the reliable dynamic properties of the natatorium. The constructive suggestion on structural evaluation of the natatorium is that periodic assessment work must be maintained to ensure the natatorium's safety in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.312-314
• /
• 2000

The electric wave propagation characteristics of electromagnetic field by induction current shows a nonlinear distinction in the metal but linear on air. This paper is written about the magnetic transmission distinction in the metalic tube, which wrapped the center axis by the same direction. The electromagnetic field made by the transmission signal is transferred from the transmission coil area toward the receiving coil by the magnetic diffusion. So, it is different magnetic flux around the coil with one in the remote field area. Analyzing such a complex magnetic characteristic, we verified this theory by the vector analysis and presented eddy current mechanism and analytical model about magnetic distribution in the remote field area. This magnetic distribution rate in metal body will be very useful in the nondestructive inspection of the eddy current in remote field which is recently rising as a new technology.

• 전기의세계
• /
• 제29권9호
• /
• pp.594-598
• /
• 1980

This paper describes an analytical method on the starting torque of hysteresis motor, taking account of penetration effects of magnetic-field and eddy-current into the rotor, to the elliptical approximation method of hysteresis-loop. By the above method, it have obtained the torque of rotor ring with non-magnetic and non-conductive material arbor, and the results are concerned and compared with that of computed by aid of callibration factor, k=1+exp(-2t$_{r}$/.delta.).)