• 제목/요약/키워드: Analysis of density

검색결과 9,004건 처리시간 0.046초

Analysis of Interface Trap Density between Semiconductor-Gate insulator with C-V characteristics

  • Jeong, Seung-Hyeon;Kim, Se-Min;Song, Chung-Kun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.645-647
    • /
    • 2008
  • In this paper, we analyzed interface trap density between pentacene and PVP and SiO2 gate dielectric by using high-low C-V characteristics. The interface trap density was $10^{13}\;cm^{-2}eV^{-1}$.

  • PDF

점사상 밀도 분석을 위한 L-지표의 적용 (Applying the L-index for Analyzing the Density of Point Features)

  • 이병길
    • Spatial Information Research
    • /
    • 제16권2호
    • /
    • pp.237-247
    • /
    • 2008
  • 지도좌표를 가진 정보의 통계적 분석은 GIS 중요기능 중 하나로 인정되고 있다. 그 중 가장 기본적인 분석의 하나로 점사상에 대한 밀도분석이 이루어지고 있다. 밀도분석은 일반적으로 라스터 분석의 일부로 간주되고 있으며, 적합한 밀도분석을 위해서는 kernel 반경으로 알려진 검색반경의 결정이 중요한 것으로 알려져 있다. 본 연구에서는 기존 연구 결과에서 검색반경 설정에 유용한 것으로 알려진 L-지표를 이용하여, 비즈니스 GIS 분야에 축적된 점사상의 밀도 분석에 적합한 반경을 추정하고, 추정된 결과를 기반으로 점사상의 특성에 따른 L-지표의 거동을 고찰하였다. 연구결과 점사상이 대상지역의 일부 지역에서 크게 밀집되는 경우에는 L-지표가 대상지역의 크기와 무관하게 일정한 반경에서 극대값을 보이기 때문에 L-지표를 이용하여 검색반경을 설정하는 것이 유용함을 알 수 있었다. 반면, 점사상이 대상지역에 고루 분포하는 경우에는 L-지표의 극대값이 나타나는 반경이 대상지역의 크기에 따라 영향을 받기 때문에 L-지표를 이용하여 검색반경을 설정하는 것이 적합하지 않음을 알 수 있었다. 따라서 L-지표를 이용한 점사상 밀도의 검색반경 설정에는 점사상의 분포특성이 고려되어야 함을 알 수 있었다.

  • PDF

경부고속도로와 88고속도로에 대한 트럭수송시의 진동 특성 측정 및 분석 연구 (Measurements and Analysis of Truck Transport Vibration Characteristics on the Gyungbu and 88 Highway)

  • 박인식
    • 한국포장학회지
    • /
    • 제12권1호
    • /
    • pp.21-25
    • /
    • 2006
  • Measurements of accelerometer levels transmitted from the floor in commercials truck shipments were carried out transportation of 300 Kg-load from Gyungbu Highway(Waegouan-Seoul) to 88 Highway(Gwangju-Daegu). Different characteristics were observed the values measured the vibration levels with directions in the two Highway's as a function of road condition and truck speed. The results showed that the vibration levels of the Gyungbu Highway is much higher than those of the 88 Highway. A following analysis on the obtained values was used to get the acceleration spectral density (ASD) and power spectral density (PSD). For the entire transit route, the results showed that the level of vibration to vertical direction was significant effects for damaging the products carried compared to other directions such as longitudinal and transverse. This paper provides an updated history of measured characteristics of vibration levels for highways using mainly in domestic area.

  • PDF

A simple analysis on the abnormal behavior of the argon metastable density in an inductively coupled Ar plasma

  • 박민;유신재;김정형;성대진;신용현;장홍영
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.438-438
    • /
    • 2010
  • The abnormal behavior of the argon metastable density during the E-H mode transition in argon ICP discharge was investigated. Lots of investigations including global models expected that during and after the mode transition of ICP discharge, the density of metastable increases with applied rf power (i.e. electron density). However, recent direct measurement of metastable density revealed that the metastable density of argon decreases with the applied power during and after the mode transition. This result may not be explained by the previous global model which is based on the assumption of the Maxwellian electron energy distribution function (EEDF). In this paper, to explain this abnormal behavior with simple manners, a simple global model taking account of the effect of the non-Maxwellian EEDFs incorporating into a set of coupled rate equations is proposed. The result showed that the calculated metastable density taking account of non-Maxwellian EEDF and its evolution during the transition has an abnormal behavior with electron density and is in good agreement with the previous measurement results, indicating the close coupling of electron kinetics and the behavior of metastable density. The proposed simple model is expected to provide qualitative kinetic insight to understand the behavior of the metastable density in various plasma discharges which typically exhibit non-Maxwellian distribution.

  • PDF

고콜레스테롤혈증 치료 약물들에 대한 비용-효과 분석 (Cost-effectiveness Analysis of Pharmacologic Treatment in Hypercholesterolemia)

  • 정경래;문옥륜
    • 보건행정학회지
    • /
    • 제9권3호
    • /
    • pp.70-94
    • /
    • 1999
  • This paper was performed for a cost-effectiveness analysis of pharmacologic treatment of hypercholesterolemia. Agents modeled were cholestyramine, gemfibrozil. bezafibrate, lovastatin, pravastatin, simvastatin. Pharmacologic effectiveness was estimated by regression from reported clinical trials. Pharmacologic effects were expressed as the percent change of blood cholesterol level. Cost estimates included patients' travel expenses and time loss as well as resource consumption in the health care sector. Bezafibrate was the most efficient agent for reducing total cholesterol levels, having an cost over 1 year of ₩31.400 per percent reduction in total cholesterol. Simvastatin (10mg/d) was also efficient(₩33,100 per percent reduction). Chole styramine(8g/d) was least efficient at ₩90,200. For low-density lipoprotein cholesterol. simvastatin(10mg/d) was most efficient, at ₩23,200 per percent reduction, followed by lovastatin(20mg/d) at ₩28,000. Gemfibrozil was least efficient at ₩77,800 per percent reduction. For high-density lipoprotein cholesterol. bezafibrate(400mg/d) was most efficient at ₩39,300 per percent increase of high-density lipoprotein cholesterol. Cholestyramine was least efficient at ₩514,700. Analyses combining low-density lipoprotein cholesterol and high-density cholesterol effects suggest that bezafibrate(600mg/d) and simvastatin (10mg/d) were most efficient for reducing cardiovascular risk. The cost-effectiveness analysis results show that both simvastatin and bezafibrate could be efficient treatment. Simvastatin provide more effective treatment at higher cost, whereas bezafibrate is more cost-effective, as it may be less effective, at lower cost. Therefore, clinicians should choose reasonable treatment according to the patient's needs This pharmacoeconimc analysis will provide a guideline for efficient pharmacologic treatment and also be reference data for pricing new drugs.

  • PDF

RF 전자기장 생체 영향 실험에서 통계적 방법을 통한 전자기장 노출 불확실성 분석 (The analysis of RF dosimetric uncertainties by using statistical method at in-vivo and in-vitro experiments)

  • 최성호;김남
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.74-78
    • /
    • 2003
  • This paper shows the dosimetric uncertainties of electromagnetic field at in-vivo and in-vitro experiments. For more accurate consequences of these researches, we have tried to find out any correlations among output power, power density and specific absorption rate(SAR) with the results of in-vivo, in-vitro tests and SAR reports of cellular phone and PDA. In the case of in-vivo tests, the power density has close statistical correlations with SAR value and in the event of in-vitro tests, the output power has considerable statistical correlations with SAR containing duty factor. On the other hand, we found that both power density and output power don't have any close correlations with SAR. And, we obtained fitted regression form among frequency, power density and SAR containing duty factor through multiple linear regression analysis.

  • PDF

우리나라 상토의 물리적 표준분석법 설정 연구 1. 입자밀도 및 용적밀도 (Development of Standard Analysis Methods for Physical Properties on Korean bedsoil 1. Particle density and Bulk density)

  • 김이열;조희기
    • 한국토양비료학회지
    • /
    • 제35권6호
    • /
    • pp.327-334
    • /
    • 2002
  • 우리나라 유통상토에 대한 물리적 표준분석법을 설정하기 위한 연구를 실시하였다. 국내 시중에 유통되고 있는 53개 품목의 원예용 상토와 9개 품목의 수도용 상토를 대상으로 설정된 분석법을 적용하여 실험하였다. 입자밀도의 측정은 가스형 피크노메타 (Micromeritics Co. Model 1305)를 사용하면 속도와 정확성 면에서 매우 유리 하였다. 용적밀도는 구미에서 Sandbox법에 의한 용적밀도를 기본으로 하기 때문에 이와 유사한 성적을 얻을 수 있는 다양한 실험을 한 결과, 추다짐법 (Plunger compaction method)이 가장 유의성 있는 측정 방법으로 밝혀졌다. 한편 가스형 피크노메타법에 의한 우리나라 유통상토의 입자밀도는 원예용이 1.93, 수도용이 $2.43Mg\;m^{-3}$로 나타났으며, 추다짐법에 의한 용적밀도는 원예용이 0.22, 수도용이 $1.01Mg\;m^{-3}$로 각각 나타났다.

Performance Analysis of SOFC/MGT Hybrid System

  • Kim, Jae-Hwan;Suzuki, Kenjiro
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집D
    • /
    • pp.703-707
    • /
    • 2001
  • A performance analysis of a SOFC/MGT hybrid system has been carried out for concept design. Thermo-dynamic models for each component being able to describe electrochemical characteristics and heat and mate-rial balance are proposed. Estimated is the power capacity of a SOFC suitable for the hybrid operation with a 5kW class MGT. Effects of current density and operating pressure are also investigated. Electric efficiency showed weak dependence on operating pressure and current density. It is desirable that the SOFC operates at high current density in manufacturing cost's point of view though operating with high current density slightly decreases the electric efficiency find specific power.

  • PDF

DSMC Analysis of Pressure Effect on Low-Density Nozzle Flow

  • Chung, Chan-Hong;Kim, Kyung-Hoe
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제1권2호
    • /
    • pp.1-8
    • /
    • 2000
  • The flow in low-density plumes expanding into a region of finite pressure shows a quite different behavior from that observed in low-density plumes expanding into a vacuum. The flow structure in the plume varies depending on applied ambient and stagnation chamber conditions. In the present study, the direct simulation Monte-Carlo (DSMC) method based on molecular gas dynamics is employed in the analysis of low-density gas flows expanding through a small converging/diverging nozzle. Special attention has been paid to the effect of non-zero ambient and stagnation pressures on the flow structure which has rarely been studied using the DSMC method.

  • PDF

Low-energy interband transition effects on extended Drude model analysis of optical data of correlated electron system

  • Hwang, Jungseek
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제21권3호
    • /
    • pp.6-12
    • /
    • 2019
  • Extended Drude model has been used to obtain information of correlations from measured optical spectra of strongly correlated electron systems. The optical self-energy can be defined by the extended Drude model formalism. One can extract the optical self-energy and the electron-boson spectral density function from measured reflectance spectra using a well-developed usual process, which is consistent with several steps including the extended Drude model and generalized Allen's formulas. Here we used a reverse process of the usual process to investigate the extended Drude analysis when an additional low-energy interband transition is included. We considered two typical electron-boson spectral density model functions for two different (normal and d-wave superconducting) material states. Our results show that the low-energy interband transition might give significant effects on the electron-boson spectral density function obtained using the usual process. However, we expect that the low-energy interband transition can be removed from measured spectra in a proper way if the transition is well-defined or well-known.