• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.59-68
• /
• 2015

Traditional structure analysis method is based on numerical matrix analysis to use the geometries consisting of the structure. The characteristics require a lot of computer memories and computational time. To avoid these weaknesses, new approach to analyze truss structure was suggested by adopting topological load redistribution method. The axial forces to be not structurely analyzed yet against outside loads were redistributed by using nodal equation of equilibrium randomly at each node without constructing global matrix. However, this method could not calculate the axial forces if structure is statically indeterminate due to degree of many indeterminacies. Therefore, to apply the method suggested in this research, all redundancies of truss structure were replaced by unit loads. Each unit load could make the deformation of a whole structure, and a superposition method was finally adopted to solve the simultaneous equations. The axial forces and deflections agreed with the result of commercial software within the relative error of 1 %, whereas in the case that the axial forces are relatively very smaller than others, the relative errors were increased to 2 %. However, as the values were small enough not to be considered, it was practically useful as a structural analysis model. This model will be used for structural analysis of truss type of large structure such as agricultural farming facility.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.405-412
• /
• 2005

In this study, a numerical method for soil-pile-structure interaction problems in multi-layered half-plane is developed. The total soil-pile-structure interaction system is divided into two parts namely, nonlinear structure part and linear soil-pile interaction parts. In the structure field, the general finite element method is introduced to solve the dynamic equation of motion for the structure. In the soil-pile structure interaction part, physical model consisting of lumped parameter, which is frequency dependent coefficient and determined by rigorous analysis method is introduced. Using proposed analysis procedure, the nonlinear behavior of structure considering soil-structure interaction can be efficiently determined in time domain and the analysis cost is dramatically reduced.

• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.64-67
• /
• 2017

This work dealt with structural safety analysis about sandwich composite structure of automotive floor board. In this work, structural design and analysis of sandwich composite structure for automobile floor board were performed. Firstly, structural design requirement of automobile floor board was investigated. After structural design, the structural analysis of the automobile floor board were performed by the finite element analysis method. It was performed that the stress and displacement analysis at the applied load condition. After structural test of target structure, structural test results were compared with analysis results. Through the structural analysis, it was confirmed that the designed floor board structure is safety.

• Journal of Power System Engineering
• /
• v.16 no.1
• /
• pp.78-83
• /
• 2012

The authors suggest the algorithm for the static analysis of a three dimensional solid structure by using the finite element-transfer stiffness coefficient method (FE-TSCM) and the hexahedral element of the finite element method (FEM). MATLAB codes were made by both FE-TSCM and FEM for the static analysis of three dimensional solid structure. They were applied to the static analyses of a very thick plate structure and a three dimensional solid structure. In this paper, as we compare the results of FE-TSCM with those of FEM, we confirm that FE-TSCM introducing the hexahedral element for the static analysis of a three dimensional solid structure is very effective from the viewpoint of the computational accuracy, speed, and storage.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.13-22
• /
• 2012

The spatial structure analysis using the existing space syntax has a weakness only to apply the road factor. Hence, it is necessary to perform a new spatial structure analysis considering the regional characteristics factor as well as the road factor. The purpose of this study is to propose a modified spatial structure analysis which adopts road and regional characteristics factors using the existing space syntax and GIS and then to apply it to the spatial structure analysis of the urbanized areas in Hapdeok town. For the new analysis, the experts' survey has been conducted to derive the spatial structure factors of the area and their relative weights. Specifically, it drew the road factor as well as the regional characteristics factors such as road, district, land value, and building density. This study shows that the existing spatial structure analysis considering only the road factor does not reflect the actual spatial structure but the modified spatial structure analysis considering the road factor and the regional characteristics factors more accurately analyzes the spatial structure of Hapdeok town. Hapdeok is not an area where road networks were developed along main development axis and its centrality was changed, but an area where road networks were developed by effectiveness and equity and its centrality was changed by downtown decline. The towns like Hapdeok is more suitable for applying the modified spatial structure analysis method considering the regional characteristics factors. Further research is required for selecting characteristics factors and appropriate parameters in the modified spatial structure analysis. Further case studies await in other cities for conducting its verification.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1354-1369
• /
• 2004

This paper presents a logical structure analysis method which transforms Web documents into XML ones. The proposed method consists of three phases: visual grouping, element identification, and logical grouping. To produce a logical structure more accurately, the proposed method defines a document model that is able to describe logical structure information of topic-specific document class. Since the proposed method is based on a visual structure from the visual grouping phase as well as a document model that describes logical structure information of a document type, it supports sophisticated structure analysis. Experimental results with HTML documents from the Web show that the method has performed logical structure analysis successfully compared with previous works. Particularly, the method generates XML documents as the result of structure analysis, so that it enhances the reusability of documents.

• Steel and Composite Structures
• /
• v.29 no.3
• /
• pp.287-299
• /
• 2018

The purpose of this study is to investigate the effectiveness of damped cable systems (DCS) to mitigate the earthquake-induced responses of a building frame structure. The seismic performance of the DCS is investigated using the fragility analysis and life cycle cost evaluation of an existing building retrofitted with the DCS, and the results are compared with the structure retrofitted with conventional fluid viscous dampers. The comparison of the analysis results reveals that, due to the self-centering capability of the DCS, residual displacement approximately reaches to zero for the structure retrofitted with the DCS. The fragility analysis shows that the structure retrofitted with the DCS has the least probability of reaching the specific limit states compared to the bare structure and the structure with the conventional fluid viscous damper (VD), especially under the severe ground motions. It is also observed that both the initial and the life cycle costs of the DCS seismic retrofitting technique is lesser compare to the structure retrofitted with the VD.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.19-25
• /
• 1998

This paper discuss to structure analysis of manufactured goods with DNC. DNC procedure is using CAD, CAM software and CNC machining center. CAM software is purpose of G-code generation for CNC programming. For structure analysis used to result from FEM code and the object of analysis is thincylinder.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.45-50
• /
• 1999

The object of this study is structure analysis of vehicle air compressor. Structure analysis is compose to nodal solution and element solution using ANSYS code. Then analysis is partition to head part, cylinder and piston part of vehicle air compressor. Stress and strain results are satisfy to Von Mises yield criterion.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.130-135
• /
• 2003

This paper presents the method for structure borne noise analysis of a flexible body in multibody system. The proposed method is the superposition method using flexible muitibody dynamic analysis and finite element one. This method is executed in 3 steps. In the la step, time dependent quantities such as dynamic loads, modal coordinates ana gross body motion of the flexible body are calculated efficiently through flexible multibody dynamic analysis. And frequency response functions are computed using Fourier transforms of those time dependent quantities. In the 2$\^$nd/ step, acoustic pressure coefficients are obtained through structure-acoustic coupling analysis by finite element analysis. In the final step, frequency responses of acoustic pressure at the acoustic nodes are recovered through linear superposition of frequency response functions with acoustic pressure coefficients. The accuracy of the proposed method is verified in the numerical example of a simple car model.