• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.492-498
• /
• 2001

In the previous study, temperature monitoring of case about shrinkage fit process was performed and heat transfer model was developed in detail by feedback and tuning among monitoring result, process investigation, and analysis result. The gap element in contact between case and core was effectively used in analysis model. In present study, following things are performed to solve deformation of case due to shrinkage fit process on the basis of previous result. Above all, mechanical material properties of case are measured by case specimen for deformation analysis considering weldment of case. Deformation of case before and after shrinkage fit process is measured, too. Three dimensional deformation model is developed by the comparison and inspection between these experimental data and analysis results. Deformation analysis is simulated with the result of heat transfer analysis, in other words, non-coupled analysis is used. Finally the countermeasure for deformation is brought up through those.

• 소성∙가공
• /
• 제11권2호
• /
• pp.147-154
• /
• 2002

The tension levelling Process is Performed to elongate the strip plastically In combination of tensile and bending strain so that all longitudinal fibers In the strip have an approximately equal amount ofn length and undesirable strip shapes are corrected to the flat shape. Thus paper is concerned with a simulation of the tension levelling process based on the analysis of tile unit model for the tension leveller. Analysis technique such as the sequential analysis of the unit model is suggested and verified with the assembly analysis of the unit model for the effective arts economic analysis of the full set of the tension leveller. Analysis of the full tension levelling Process using sequential unit models Is carried out for steel strips with the shape defect and provides the effect of the intermesh and optimum amount of the intermesh in tension levelling process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.201-204
• /
• 2001

The tension levelling process is performed to elongate the strip plastically in combination of tensile and bending strain so that all longitudinal fibers in the strip have an approximately equal amount of length and undesirable strip shapes are corrected to the flat shape. This paper is concerned with a simulation of the tension levelling process based on the analysis of the unit model for the tension leveller. Analysis technique such as the sequential analysis of the nit model is suggested and verified with the assembly analysis of the unit model for the effective and economic analysis of the full set of the tension leveller. Analysis of the full tension levelling process using sequential unit models is carried out and provides the effect of the intermesh and optimum amount of the intermesh in tension levelling process.

• 한국실내디자인학회논문집
• /
• 제37호
• /
• pp.136-143
• /
• 2003

Users' demands on the space are changing in variety. These demands include reasonable space and form, harmonious composition with surroundings and esthetic satisfaction that could be brought by personal tastes and preferences. In addition, models that are introduced from designing process and from various forms tend to lack objective decision making standard. Accordingly it is difficult to find a clear alternative plan and process. In an effort to solve these problems, the objects of this study are; to propose an analysis model of image and space by using image process techniques that are on study in the field of artificial intelligence based on acquisition of digital image and to verify the application possibilities of such analysis model, 'Isovist' on quantitative analysis. The model can be applied with variable analysis model, as digital image process and other analysis model such as 'Isovist' It is possible that further study can complement problems from this study.

• 한국시뮬레이션학회논문지
• /
• 제24권3호
• /
• pp.55-60
• /
• 2015

본 논문은 RUP (Relational Unified Process) 모델을 사용한 SBA (simulation-based acquisition)의 효과도를 분석하기 위한 환경을 제시하고 있다. RUP 모델이 갖는 4개의 각 단계는 요구사항 분석, 설계, 개발 및 테스트 모든 단계를 포함할 수 있다. RUP 모델을 적용할 경우 소프트웨어 개발을 각 단계에서 반복되는 개발의 형태로 명시할 수 있다. 이러한 모델의 특성은 국방 영역의 획득에 적절하게 활용할 수 있게 한다. 본 논문에서는 RUP 모델과 V프로세스 모델의 관계를 제시하여 국방획득의 적용성을 제시하였다. 특히, 이러한 이론을 기반으로 하여 어떻게 사용자 인터페이스를 개발 운용할 수 있는지를 제시하였다.

• 한국경영과학회지
• /
• 제26권3호
• /
• pp.39-52
• /
• 2001

Recently, the assessment of a bank efficiency focusing on its branches has been conceived as important in developing a competitive strategy. DEA (Data Envelopment Analysis) model can be employed as an effective analysis model for such an assessment. Therefore, this paper proposes an analysis process using DEA model to conduct an efficiency assessment of bank branches. The proposed process includes a segmentation of branches considering their competitive environment and strategy for target market : this approach can help to develop effective strategies for each group of branches. The proposed DEA model can analyze efficiency in terms of not only cost but also marketing. Finally, a real case is analyzed, demonstrating the effectiveness of the proposed model and process.

• 한국병원경영학회지
• /
• 제1권1호
• /
• pp.203-247
• /
• 1996

This article reviews the art and practice of strategic management process in hospitals today, in order to help hospital administrators for managing strategic management system in their hospitals. The strategic management process model in this article is based on an integrated approach combining traditional environmental model with resource-based model of strategy. The components of the model are consisted of five steps: (1)formulating objectives, strategic assessment by external environmental analysis, internal capability analysis, TOWS analysis and marketing audit, (3)strategy choice considering context and criteria of choice, (4)program implementation through operational planning, resource allocation, and conversion, and (5)control by monitoring and evaluating hospital outputs. This article deals with many aspects of issues inherent in every step on this strategic management process.

• 한국멀티미디어학회논문지
• /
• 제20권9호
• /
• pp.1596-1605
• /
• 2017

This study recognizes the narrative of the movie as a semiotic system and proposes a structured storytelling analysis model through theoretical basis and empirical analysis. It classifies as 'Narrative 17 Process' which considers the narrative of successful 11 animations as a continuous process of formal structure. It extract the paradigmatic sub-narrative units(NU) centered on the act of the character in each process. The structural pattern of the story types are extracted by comparing and analyzing with 5 NU analysis elements presented in this study. As a result, the 4 story types were consistently classified by the SSD distance value. Therefore, this study propose a storytelling analysis model that can be effectively applied to scenarios and narrative composition stages of movie production.

• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.44-51
• /
• 2018

The purpose of RAM analysis in weapon systems is to reduce life cycle costs, along with improving combat readiness by meeting RAM target value. We analyzed the sensitivity of the RAM analysis parameters to the use of the operating system by using the Markov Process based model (MPS, Markov Process Simulation) developed for RAM analysis. A Markov process-based RAM analysis model was developed to analyze the sensitivity of parameters (MTBF, MTTR and ALDT) to the utility of the 81mm mortar. The time required for the application to reach the steady state is about 15,000H, which is about 2 years, and the sensitivity of the parameter is highest for ALDT. In order to improve combat readiness, there is a need for continuous improvement in ALDT.

• 소성∙가공
• /
• 제8권2호
• /
• pp.188-199
• /
• 1999

Semi-Solid Forming Process(Thixoforming, Rheocasting) is a novel forming process which has some advantages compared with conventional die casting, squeeze casting and hot/cold forging. In this study. Thixoforming process was selected as analysis processing in terms of billet handling and easiness of automation process. The Thixoforming process consists of reheating process of billet, billet handling, filling inot the die cavity and solidification of SSM part. In filling process, two rheology models which were Newtonian and Non-Nettonian model (Ostwald-deWaele)were verified with experimental results. The Ostwald-deWaele model shows the good agreement to the real flow and filling phenomena in die cavity. To give a boost the economical efficiency of Thixoforming process and to ensure the good forming result, reheating device coupled die set was proposed and the initial billet temperature for system that was found from experimental resluts. This study presents an overview of application of numerical analysis for simulation of semi-solid metal forming process to reduce the lead time for development of manufacturing part in industrial field.