Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

A Study on the Temperature Distribution and Deformation of Case in Shrinkage Fit Process(II) - Deformation Measurement and Deformation Analysis Model -

열박음 공정이 케이스의 온도분포 및 변형에 미치는 영향(II) - 변형 계측 및 변형 해석 모델 정립 -

  • 장경복 (부산대학교 기계기술 연구소) ;
  • 정진우 (부산대학교 기계기술 연구소) ;
  • 강성수 (부산대학교 기계기술 연구소) ;
  • 최규원 (부경대학교 생산가공학과) ;
  • 박찬우 (부경대학교 생산가공학과) ;
  • 조상명 (부경대학교 생산가공학과)
  • Published : 2001.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In the previous study, temperature monitoring of case about shrinkage fit process was performed and heat transfer model was developed in detail by feedback and tuning among monitoring result, process investigation, and analysis result. The gap element in contact between case and core was effectively used in analysis model. In present study, following things are performed to solve deformation of case due to shrinkage fit process on the basis of previous result. Above all, mechanical material properties of case are measured by case specimen for deformation analysis considering weldment of case. Deformation of case before and after shrinkage fit process is measured, too. Three dimensional deformation model is developed by the comparison and inspection between these experimental data and analysis results. Deformation analysis is simulated with the result of heat transfer analysis, in other words, non-coupled analysis is used. Finally the countermeasure for deformation is brought up through those.

Keywords

References

  1. Welded Structure materials v.45 no.1 Effect of Weld Conditions on Welding Deformation K. Satoh;T. Terasaki
  2. Control of Weld Distortion in Thin-skin Welded Structures v.52 no.5 Shigetomo Matsui
  3. Estimate and Counter-plan for Weding Deformating-Thin Plates Steel Structure v.60 no.6 Akira Sakaguchi;Takahiro Tanaka
  4. Prevention and Estimation fo Welding Deformation-Thick Plate Steel Structure v.60 no.6 Nobuyoshi Shibata
  5. Trans. Japan Weld. Res. v.11 Simplifying methods and deformation due to multi-pass welding Ueda, Y.;Nakacho. K
  6. Symposium on Computer Modeling of Fabrication Prediction of distrotion and residual stress in panel welds Chakravarti, A.P.;Malik, L.K.;Goldak, J.A.
  7. Journal Press. Vessel Tech. ASME. series J. Thermomechanical analysis of the welding process using finite element method E. Friedman
  8. Weding Journal. Dec. Research Activities Examine Residual Stresses and Distortion in Welded Structures Koichi Masubuchi
  9. 대한용접학회지 v.15 no.5 용접 구조물의 변형 예측에 관한 연구 서승일;장창두
  10. Journal of Pressure Vessels and piping v.51 Influence of postweld Heat Treatment on the Variation of Residual Stresses in 50mm Thick Welded Ferritic Steel Plates D.J. Smith;J.A. Goldak
  11. Trans. ASME Journal. Reserch Supplement v.71 no.2 Three-Dimensional Finite Analysis of Temperatures and Stresses in a Single-pass Butt-Welded pipe R.I. Karlsson;B.L. Josefson
  12. Welding Journal, Presearch Supplement v.71 no.2 Implications of Three-Dimensional Numerical Simulations of Welding of Large Structures S.B. Brown;H. song
  13. Proc. of International Symposium on Theoretical Prediction in Welding Thermal Stress of Welds (From Melting Point to Room Temperature(From Melting Point to Room Temperature) J.Goldak;J.Zhou;V. Breiguine;F. Montoya