• 대한방사선기술학회지:방사선기술과학
• /
• 제44권5호
• /
• pp.459-464
• /
• 2021

The detector performance is important role in acquiring the gamma rays from patients. Among parameters of detector performances, there is density, which relates to respond to gamma rays. Therefore, we confirm the detection efficiency according to various detector materials based on the density parameter using GATE (geant4 application for emission tomography) simulation tool. The NaI (density: 3.67 g/cm³), CZT (Cadimium Zinc Telluride) (density: 5.80 g/cm³), CdTe (Cadmium Telluride) (5.85 g/cm³), and GAGG (Gadoinium Aluminum Gallium Garnet) (density g/cm³) were used as detector materials. In addition, the point source and quadrant bar phantom, which is modeled for 0.5, 1.0, 1.5, and 2.0 mm thicknesses, were modeled to confirm the quatitative analysis using sensitivity (cps/MBq) and the full width at half maximum (FWHM, mm) at the 2.0 mm bar thickness containing visual evaluation. Based on the results, the sensitivity for NaI, CZT, CdTe, and GAGG detector materials were 0.12, 0.15, 0.16, and 0.18 cps/MBq. In addition, the FWHM for quadrant bar phantom in the 2.0 mm bar thickness is 3.72, 3.69, 3.70, and 3.73 mm for NaI, CZT, CdTe, and GAGG materials, respectively. Compared with performance of detector materials according to density, the high density can improve detection efficiency in terms of sensitivity and mean count. Among these detector materials, the GAGG material is efficient for detection of gamma rays.

• 대한기계학회논문집A
• /
• 제37권7호
• /
• pp.891-897
• /
• 2013

본 논문에서는, 고 변형률 속도에서의 알루미늄 합금의 압축 변형거동을 홉킨슨 압력봉 시험, SHPB 방법을 통해 연구하였다. 이와 함께 음향방출기법이 사용되었고, 웨이브 가이드선을 통해 시편에 연결된 AE 센서를 이용하여 충격 변형시 검출되는 AE 신호를 실시간으로 검출하였다. 검출된 AE 신호를 통해 진폭, 에너지 및 최대 주파수 특성을 분석하였다. 또한 손상 기구에 따른 음향방출신호의 특성을 분석하기 위하여 시험 수행 후 충돌 시험편 표면과 측면을 관찰하였다. 변형률이 높아질수록 AE 진폭과 AE 누적에너지는 증가하였고, AE 최대 주파수는 감소하였다. 각 신호의 특성은 재료의 손상 기구와 밀접한 관련이 있는 것으로 확인되었다.

• 대한기계학회논문집A
• /
• 제36권6호
• /
• pp.617-622
• /
• 2012

구조부재는 정적, 동적 또는 충격과 같은 다양한 하중의 영향을 받고 있다. 결과적으로 이와 같은 하중의 영향이 고려된 재료의 물성치를 획득하기 위해 각 조건에 적합한 실험적 또는 해석적 방법이 수반되어야 한다. 일반적으로 고변형률 속도에서 재료의 기계적 물성을 얻는 방법으로써 홉킨슨 압력봉 시험법(SHPB)이 널리 사용되고 있다. 본 연구에서는 이와 같은 SHPB 시험을 통해 충격 하중 조건에서 알루미늄 합금의 압축변형거동을 고찰하였으며, 실험결과와 해석결과를 비교, 분석하였다. 결론적으로 1000 ~ 2000 $s^{-1}$ 영역에서 진응력-진변형률 곡선을 비교하였을 때 실험 결과와 해석 결과가 잘 일치함을 알 수 있었다. 특히, 변형률 속도가 30% 증가함에 따라 최대유동응력은 17%증가, 변형률은 20% 증가함을 확인하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.620-625
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired for car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. ill the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6N01 alloy welds. Aluminum alloy plate of 2.0mm in thickness with filler metal bar was welded by twin beam Nd:YAG laser facility (total power:5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 l/min was used. The defocusing distance is kept at 0 mm. At travel speeds of 3 to 9 m/min and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.26-31
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired fer car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. In the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6NO 1 alloy welds. Aluminum alloy plate of 2.Omm in thickness with filler metal bar was welded by twin beam Nd: YAG laser facility (total power: 5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 1/min was used. The defocusing distance is kept at 0 mm. At travel speeds off 3 to 9 and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• 한국항공우주학회지
• /
• 제50권7호
• /
• pp.465-470
• /
• 2022

본 논문은 알루미늄 6061의 고속 충격 해석과 고속 충격 시험 결과를 비교 검증하여 금속 재료의 고속 충격에 의한 거동 특성을 연구하였다. 고속 충격 해석을 위해 만능재료시험기를 이용한 준정적 시험과 Hopkinson bar를 이용한 동적 시험을 통해 Huh-Kang 모델과 Johnson-Cook 파손 모델의 계수를 구했다. LS-DYNA 프로그램 해석을 이용하여 관통 속도와 형상을 결과로 예측했고 고속 충격 시험기를 이용한 시험 결과와 비교하였다. 이를 바탕으로 항공기 가스터빈 엔진 블레이드 컨테인먼트 평가 연구에 적용하고자 한다.

• 한국주조공학회지
• /
• 제22권3호
• /
• pp.137-143
• /
• 2002

Silica sand, zircon sand, and steel shots were used as mold packing materials in lost foam casting of the aluminum alloy bar. Vibration acceleration in three directions and temperatures in the casting and mold were measured, and packing and cooling characteristics of these materials were investigated. Packing densities increased with increase in vibration magnitude and time, and were $1.41{\sim}1.49g/cm^2$ for silica sand, $2.54{\sim}2.86g/cm^2$ for zircon sand, and $3.92{\sim}4.52g/cm^2$ for steel shots. Sound castings were obtained only without evacuation of the flask during pouring. Solidification time became faster in order of silica sand, zircon sand and steel shot packing because steel shot has the highest cooling capacity of them. Solidification time of steel shot packing was shortened to about 1/2 of silica sand packing. Cooling capacity of sand mold was generally evaluated by heat diffusivity of the mold, however could be simply evaluated with specific heat per unit volume of the packing material in lost foam casting.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.58-64
• /
• 2013

Several joining methods involving resistance welding, laser welding, ultrasonic welding and mechanical joining are currently applied in manufacturing lithium-ion batteries. Cu and Al alloys are used for tab and bus bar materials, and laser welding characteristics for these alloys were investigated with similar and dissimilar material combinations in this study. The base materials used were Al 1050 and oxygen-free Cu 1020P alloys, and a disk laser was used with a continuous wave mode. In bead-on-plate welding of both alloys, the joint strength was higher than the strength of O tempered base material. In overlap welding, the effect of welding parameters on the tensile shear strength and bead shape was evaluated. Tensile shear strength of overlap welded joint was affected by interfacial bead width and weld defect formation. The tensile-shear specimen was fractured at the heat affected zone by selecting proper laser welding parameters.

• Advances in materials Research
• /
• 제8권1호
• /
• pp.25-36
• /
• 2019

The utilization of fibre in concrete production not only solves the problem of disposing this solid waste but helps conserve natural resources. This study investigated the effect of waste aluminum shavings on bond strength of laterized concrete. Laterized concrete spliced beams of $150{\times}250{\times}2150mm$ and $175{\times}275{\times}2300mm$ were prepared. Fifteen specimens with 16 mm and 20 mm were cast with the addition of aluminium shavings at varying percentages of 1vol%, 1.5vol% and 2vol%; another ten specimens with 16 mm and 20 mm diameter bars at 0% of aluminium shavings were cast as control. Concrete cubes of number were prepared, three taken for each set of various percentages of aluminium shavings were used to determine the concrete strength. It was observed from the analysis that the compressive strength decreased as the percentage of aluminium shavings increased, while the aluminium shavings increased the bond between concrete and steel. However, for normal concrete there was an increase in bond resistance with increase in aluminium shavings. The bond resistance of 16 mm was found to be higher than that of 20 mm in all the specimens tested.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.981-987
• /
• 2010

Split Hopkinson Pressure Bar(SHPB) 실험기법은 고변형률 하중 조건하에서 변형하는 여러 가지 공업 재료의 변형 거동 특성을 규명하는데 가장 널리 사용되는 실험 방법 중의 하나이다. 본 논문에서는 봉을 통하여 전파하는 응력파의 모양과 라이징 시간을 제어할 수 있는 pulse shaper를 사용하는 수정 SHPB 실험기법을 이용하였다. 수정 SHPB 실험 장치에 고온 장치를 부착하고 알루미늄 합금 7075-T6의 고변형률 하에서의 고온 변형거동에 대한 연구를 수행하였다. 고온 수정 SHPB 실험 장치를 이용하여 알루미늄 합금 7075-T6의 온도와 변형률속도에 따른 기계적 특성을 규명하고, 실험적으로 얻어진 데이터를 Johnson-Cook 구성방정식을 적용하여 알루미늄 합금 7075-T6의 동적 거동을 모델 하는 변수를 결정하였다.