• Proceedings of the ESK Conference
• /
• 1995.04a
• /
• pp.3-14
• /
• 1995

To investigate the effect of illumination conditions on visual inspection performance for TV panel glasses, three dependent variables, inspection time, error, and preference , were measured and analyzed through two consecutive experiments. The first experiment for reflection inspection was conducted using two independent variables, position and brightness. The second experiment for transparent inspection was made using two independent variables, height and brightness. The summary of the results of the experiment for reflection inspection are as follows ; The inspection performance of the position right above the subject (Position 1) was the best among the conditions in terms of errors, while the performance of the position slightly in front of and above the subject(Position 2) was the best in terms of inspection times. Inspection time was statistically different according to the brightness conditions specifically at the position in front of the subject(Position 3). The results of the second experimen for transparent inspection are that the inspection performance at medium height (Height 2) was the best among the three conditions in terms of errors while the performance at lower height(Height 3) was the best in subject preference. Based upon both results with respect to actual field conditions, two alternative inspection station designs were proposed for each lighting conditon.

• Structural Engineering and Mechanics
• /
• v.10 no.2
• /
• pp.93-110
• /
• 2000

An alternative interpretation of the completeness requirements for the higher order elements is presented. Apart from the familiar condition, $\sum_iN_i=1$, some additional conditions to be satisfied by the shape functions of higher order elements are identified. Elements with their geometry in the natural form, i.e., without any geometrical distortion, satisfy most of these additional conditions inherently. However, the geometrically distorted elements satisfy only fewer conditions. The practical implications of the satisfaction or non-satisfaction of these additional conditions are investigated with respect to a 3-node bar element, and 8- and 9-node quadrilateral elements. The results suggest that non-satisfaction of these additional conditions results in poorer performance of the element when the element is geometrically distorted. Based on the new interpretation of completeness requirements, a 3-node element and an 8-node rectangular element that are insensitive to mid-node distortion under a quadratic displacement field have been developed.

• Food Science of Animal Resources
• /
• v.40 no.6
• /
• pp.946-956
• /
• 2020

To identify the effect of sodium-alternative curing salts on the quality properties of salami through the ripening process, four salami treatments were prepared with different curing salts, T1 (-control, NaCl 1.9%), T2 (+control, NaCl 1.9%+NaNO₂ 0.01%), T3 (KCl 1.9%+NaNO₂ 0.01%), and T4 (MgCl₂ 1.9%+NaNO₂ 0.01%), under 40 days ripening conditions. Sodium-alternative salts (T3 or T4) showed characteristically different quality traits compared with T2. Especially, T3 had lower pH, water activity, volatile basic nitrogen, and lipid oxidation after 20 days of ripening period, compare with T2 or T4 (p<0.05). Sodium nitrite had critical impact on increased a* values, and T3 showed higher a* values compared with T2 or T4 (p<0.05). Sodium nitrite reduced initial growth of coliforms but sodium-alternative salts did not affect microbial growth patterns. T2-T4 containing sodium nitrite had higher content of umami nucleotide flavor compounds compared with T1, regardless of the chlorine salt species. The combined use of sodium-alternative curing salts and minimal sodium nitrite was found to be an applicable strategy on development of low sodium salami without a trade-off of the product quality.

• Molecules and Cells
• /
• v.37 no.1
• /
• pp.81-87
• /
• 2014

Chronic pressure-overload cardiac hypertrophy is associated with an increased risk of morbidity/mortality, largely due to maladaptive remodeling and dilatation that progresses to dilated cardiomyopathy. Alternative splicing is an important biological mechanism that generates proteomic complexity and diversity. The recent development of next-generation RNA sequencing has improved our understanding of the qualitative signatures associated with alternative splicing in various biological conditions. However, the role of alternative splicing in cardiac hypertrophy is yet unknown. The present study employed RNA-Seq and a bioinformatic approach to detect the RNA splicing regulatory elements involved in alternative splicing during pressure-overload cardiac hypertrophy. We found GC-rich exonic motifs that regulate intron retention in 5' UTRs and AT-rich exonic motifs that are involved in exclusion of the AT-rich elements that cause mRNA instability in 3' UTRs. We also identified motifs in the intronic regions involved in exon exclusion and inclusion, which predicted splicing factors that bind to these motifs. We found, through Western blotting, that the expression levels of three splicing factors, ESRP1, PTB and SF2/ASF, were significantly altered during cardiac hypertrophy. Collectively, the present results suggest that chronic pressure-overload hypertrophy is closely associated with distinct alternative splicing due to altered expression of splicing factors.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.514-520
• /
• 2014

In this study, the production potential of alternative coagulant ($Al_2(SO_4)_3$ solution) having the identical coagulation activity with respect to the commercial coagulant was investigated. The raw material of alternative coagulant was a spent catalyst including aluminium (waste activated alumina) generated in the manufacturing process of the polymer. The alternative coagulant was produced through a series of processes: 1) intense heat and grinding, 2) chemical polymerization and substitution with $H_2SO_4$ solution, 3) dissolution and dilution and 4) settling and separation. To determine the optimal operating conditions in the lab-scale autoclave and dissolver, the content of $Al_2O_3$ in alternative coagulant was analyzed according to changes of the purity of sulfuric acid, reaction temperature, injection ratio of sulfuric acid and water in the dissolver. The results showed that the alternative coagulant having the $Al_2O_3$ content of 7~8% was produced under the optimal conditions such as $H_2SO_4$ purity of 50%, reaction temperature of $120^{\circ}C$, injection ratio of $H_2SO_4$ of 5 times and injection ratio of water of 2.3 times in dissolver. In order to evaluate the coagulation activity of the alternative coagulant, the Jar-test was conducted to the effluent in aerobic reactor. As a result, in both cases of Al/P mole of 1.5 and 2.0, the coagulation activity of the alternative coagulant was higher than that of the existing commercial coagulant. When the production costs were compared between the alternative and commercial coagulant through economic analysis, the production cost reduction of about 50% was available in the case of the alternative coagulant. In addition, it was identified that the alternative coagulant could be applied at field wastewater treatment plant without environmental problem through ecological toxicity testing.

• Fire Science and Engineering
• /
• v.21 no.1 s.65
• /
• pp.7-18
• /
• 2007

This research intended to show a reasonable way to improve working conditions of fire officers in Korea. It shows that fire officers have dignity of their social roles even though they have the unfairness in a work time, rewards, promotions and opportunities of overseas training compared with those of other government officers. The unfairness needs to be solved. In addition, there are more demands in fire fighters, but part of a regional government system already composed of 64.06% of fire officers, which means, there are too many fire fighters in one regional government. Therefore, it is difficult to employ more fire fighters. This is one of barriers to prevent from improvement of the working conditions. To improve the working conditions and to overcome the barriers, there are important solutions to counter the problems. Those are application of alternative policies and systems. Compared with the employment system and workload of fire officers in USA, Japan and other advanced countries, it is necessary to introduce alternative policies which include operation of partial three-shift system, expansion of oversees training, expansion of rotational-off system and improvement of employees' welfare policies.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.274-282
• /
• 2013

Research was initiated to investigate early germination and establishment characteristics of perennial ryegrass (PR, Lolium perenne L.). An alternative condition was applied in Experiment I with 8-hr light at $25^{\circ}C$ and 16-hr dark at $15^{\circ}C$ (ISTA condition). Experiment II was conducted under $5^{\circ}C$ to $25^{\circ}C$ (natural condition). Significant differences were observed in germination percentage, germination speed and germination peak time. Seed germinating vigor was 66.00 to 93.75% under ISTA and 66.25 to 93.50% under natural conditions. Germination speed, measured as days to germination of 50% through 90%, was much faster with 'Pennant II', 'Brightstar II', 'Sonata' and 'Accent II' under ISTA conditions. But it was faster only with 'Pennant II' and 'Brightstar II' under natural conditions. Germination peak time ranged 1.48 to 5.65 days under ISTA, while 2.17 to 10.63 days under natural conditions. Regardless of growing conditions, the shortest cultivars in peak time were 'Sonata', 'Pennant II', and 'Brightstar II' and the longest one 'Revenge GLX'. Considering germinating vigor, early germination speed and germination peak time, 'Pennant II', 'Brightstar II', 'Sonata' and 'Accent II' were regarded as excellent cultivars under ISTA conditions, while 'Pennant II' and 'Brightstar II' under natural conditions.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.373-375
• /
• 2002

Lhcb genes encoding light-harvesting chlorophyll-a/b binding (LHC) proteins of photosystem (PS) II were comprehensively characterized using the expressed sequence tag (EST) databases in the green alga, Chlamydomonas reinhardtii. The gene family was composed of eight Lhcb genes including four new genes, which were isolated and sequenced. The effects of light intensity on the levels of mRNAs accumulation of multiple Lhcb genes were studied under various conditions. The results indicate that Lhcb genes are coordinately regulated in response to light conditions, and repressed when the input light energy exceeded the requirement for $CO_2$ assimilation. The effects of high light on the expression of the Lhcb genes observed in the presence of an electron transport inhibitor, DCMU, and in mutants deficient in photosynthetic reaction centers suggest the presence of two alternative mechanisms for regulating the genes expression under high-light conditions.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.4
• /
• pp.1065-1092
• /
• 2018

This manuscript is involved with a category of second-order impulsive functional integro-differential equations with nonlocal conditions in Banach spaces. Sufficient conditions for existence and approximate controllability of mild solutions are acquired by making use of the theory of cosine family, Banach contraction principle and Leray-Schauder nonlinear alternative fixed point theorem. An illustration is additionally furnished to prove the attained principles.

• Journal of Digital Convergence
• /
• v.9 no.2
• /
• pp.79-88
• /
• 2011

This article is exploring on the concept and realization conditions of 'Smart Learning' including the problems about e-Learning, such as its low learning effectiveness and the weak profitability of its industry. We think, Smart Learning is an alternative solution for the continuous growth of e-Learning in the smart computing age. In this context, this paper will review the actual condition of e-Learning and the prior studies of Smart Learning, and study the concept and realization conditions of Smart Learning.