• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.2-2
• /
• 2007

• 한국문헌정보학회지
• /
• 제54권3호
• /
• pp.41-69
• /
• 2020

이 연구의 목적은 이용자 선호도 및 관심분야 정보 수집을 위한 웹 기반의 프로파일링 모델을 활용하여 이용자 선호도 기반의 대체자료 추천 시스템의 개발과 정보 추천 모델의 핵심이 되는 도서자동분류엔진을 설계하고 시범 구축하는 것이다. 이용자 선호도 기반의 대체자료 선정 방법론을 개발하기 위해 국가대체자료공유시스템인 DREAM의 이용자 대체자료 이용 내역을 분석하여 KDC의 10개 주제 분야별 대체자료에 대한 이용자 선호도를 조사하였다. 이용 내역 데이터의 표제 정보를 분석하여 주제 분야별로 그리고 조사대상 기간별로 관심 키워드를 도출하였으며, 도출된 키워드를 주제 분야별로 순위화하였다. 주제별과 기간별로 순위화된 키워드는 이용자 선호도를 나타내는 것으로 출판된 도서 가운데 대체자료 제작 대상을 선정하는데 활용할 수 있다. 또한 이용자 선호도 기반의 대체자료 선정을 위하여 국립장애인도서관의 내부 데이터뿐만 아니라 타 도서관이나 다양한 유관 기관의 서비스 및 이용 내역을 반영하기 위한 연계방안을 제안하였다.

• 마이크로전자및패키징학회지
• /
• 제21권2호
• /
• pp.71-78
• /
• 2014

Silicon has been most widely used semiconductor material for power electronic systems. However, Si-based power devices have attained their working limits and there are a lot of efforts for alternative Si-based power devices for better performance. Advances in power electronics have improved the efficiency, size, weight and materials cost. New wide band gap materials such as SiC have now been introduced for high power applications. SiC power devices have been evolved from lab scale to a viable alternative to Si electronics in high-efficiency and high-power density applications. In this article, the potential impact of SiC devices for power applications will be discussed along with their Si counterpart in terms of higher switching performance, higher voltages and higher power density. The recent progress in the development of high voltage power semiconductor devices is reviewed. Future trends in device development and industrialization are also addressed.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.129-134
• /
• 2005

There is a strong industrial demand for the development of light-weight vehicle to improve fuel efficiency and dynamic performance. The effective method of achieving the weight reduction is to use low-density materials such as aluminum and magnesium. In applying these materials to the vehicle, it is often required to join dissimilar materials such as aluminum and steel. However, conventional joining method, namely resistance spot welding cannot be used in joining dissimilar materials. Self·piercing rivet(SPR) and adhesive bonding is a good alternative to resistance spot welding. In this study, the impact test of double hat-shaped member made by resistance spot welding, SPR and adhesive bonding was performed. As a result, various parameters of crashworthiness were analyzed and evaluated. Also, the applicability of SPR and adhesive bonding as an alternative to resistance spot welding was suggested.

• 한국간호교육학회지
• /
• 제10권2호
• /
• pp.297-307
• /
• 2004

This study aims to identify the types and type-specific characteristics of subjectivity on complementary alternative therapy of nursing students using Q-methodology and to provide them as basic materials for nursing education. Q-methodology provides a scientific method for identifying perception structures that exist within certain individuals or groups. Thirty C college nursing students' classified 35 selected Q-statements into 9 points standard, according to the level of agreement or disagreement by forced normal distribution. The collected data was analyzed by using a QUNAL PC program. Resultingly, the attitude of nursing students regarding complementary alternative therapy was divided into three types. Type 1 is positive recognition. The students who think the therapy contributes to maintaining and improving health, and is a way to protect human body and improve welfare by enhancing immunity. Type 2 is objective acceptance. The students who think the complementary alternative therapy is effective when it is properly used for specific constitutions in discussion with medical teams after its effects are scientifically reviewed. Type 3 is popularity consideration. The students who put focus on its popular use and regard the therapy as very useful for not only patients but also ordinary healthy people because it is based on the natural and human approach. In conclusion, proposed are studies on influence factor of nursing students' awareness about the complementary alternative therapy and reviews on the effects of the complementary alternative therapy that is applied as nursing intervention.

• 융복합기술연구소 논문집
• /
• 제3권1호
• /
• pp.9-14
• /
• 2013

Recently, the development of renewable energy sources in Mongolia has been needed due to climate change and air pollution in Ulaanbaatar as rapid economic growth. Biodiesel can be considered as an alternative fuel for petroleum based diesel in order to decrease air pollution in Ulaanbaatar because of its no emission of particle materials from internal combustion engine in automobile. Rapeseed oil having low cloud point and pour point was suggested as a promising raw material for biodiesel production in Mongolia. Considering high population density and severe air pollution by particle materials and SOx in Ulaanbaatar, prior supplying site of biodiesel in Mongolia was the capital region including Ulaanbaatar. In the production of biodiesel in Mongolia, adsorption process was a effective alternative to washing process for the removal of residual alkali catalyst and reactants due to long winter time in Mongolia. For the stable supply of biodiesel, subsidy and no tax policy is needed in the early stage of biodiesel supply in Mongolia.

• 한국농공학회논문집
• /
• 제54권1호
• /
• pp.39-45
• /
• 2012

In this study, field test on utilization of recycled aggregates and crushed stone as horizontal drains to use an alternative material of sand in soft ground is practiced. The settlement with time showed similarly ranged from 28.4-30.3 cm in the all horizontal materials. The excess pore water pressure of the recycled aggregates and crushed stone showed smaller than sand. The small the excess pore water pressure becomes faster the consolidation period and it can reduces the amount of residual settlement. Therefore, it was verified as having enough to an alternative materials that the field applicability is excellent. The distribution of earth pressure with time showed similarly in the all horizontal materials. The recycled aggregates and crushed stone was very applicable to practice because there is no mat resistance in the horizontal drains layer. The penetration rate in the SCP and PVD improvement sections did not show large differences as the grain size and the horizontal drainage height increases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.391-394
• /
• 2003

It is inevitable that reconsideration of the use of lead oxides in the electronics industry be undertaken as long as detrimental effects to the environment remain. To solve this problem, many recent studies on Pb-free compositions for PDP (plasma display panel) dielectric layers and also sealing glass compositions have been made. The present study was conducted to investigate whether the alternative systems for leadfree low firing glasses, detailed below, are available for use in PDP materials. The results suggest that low-melting phosphate glasses would be suitable as an alternative material for the Pb-based dielectric layer, sealants and barrier ribs in PDP.

• 혜화의학회지
• /
• 제17권1호
• /
• pp.11-19
• /
• 2008

Objective : We designed this study to analyse the anti-cancer effects of materials of green vegetable juice by using the natural standard methodology and apply the results to new studying and evaluating methods. Methods : We investigated the main stream of complementary and alternative medicine (CAM), the methodology of natural standard, guideline in CAM, and concrete 15 green vegetable juice in cancer therapy. Results : There are 15 graded materials of green vegetable juice that associated with cancer in natural standard contents. Most of them get grade C, unclear or conflicting scientific evidence. Conclusion : Natural Standard aims to provide high-quality, reliable information about CAM therapies to clinicians, patients, and healthcare institutions. We have to acquire more reliable evidence in future.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.11-11
• /
• 2003

Electroplated hexavalent chromium coatings have been used in many technical applications since it was invented by G.J. Sargent in 1920. Because of the environmental problems and health risks associated with the use of hexavalent chromium, there has been an extensive search for alternative coatings with properties such as corrosion resistance and wear resistance, at a reasonable cost. However there is no single substitute that meets all the desirable performance characteristics of chromium. Advanced techniques, such as alloy plating, electroless plating, trivalent chromium plating, plasma and thermal spray coating, PVD and ion implantation, have been applied for replacing hexavalent chromium plating.