• 제목/요약/키워드: Al-Fe-Cr-Ti

검색결과 148건 처리시간 0.027초

천수만 퇴적물에서 미량금속의 지화학적 특성 (Trace metals in Chun-su Bay sediments)

  • 송윤호;최만식;안윤우
    • 한국해양학회지:바다
    • /
    • 제16권4호
    • /
    • pp.169-179
    • /
    • 2011
  • 본 연구에서는 미량 금속의 농축 가능성이 제기되는 천수만 퇴적물에 대하여 미량 금속의 조절 요인과 농축 정도를 파악하고자 하였다. 천수만 전역에 걸쳐 27개의 표층 퇴적물을 채취하였으며, 입도, 비표면적, 유기탄소 및 탄산칼슘 함량과 주성분 및 미량 금속(Al, Fe, Na, K, Mg, Ca, Ti, Mn, P, S, Ba, Sr, Li, Co, Cr, Ni, Cu, Zn, As, Cd, Cs, Sc, V, Sn) 농도를 분석하였다. 퇴적물의 총 금속 농도는 크게 3 가지 요인(석영, 희석, 탄산칼슘, 굵은 모래 혹은 정장석)에 의해 조절되었는데 V, Co, Cr, Ni, Cu, Zn, As, Cd는 석영 희석 효과(quartz dilution effect)에 의해 Mn 및 As는 석영 희석 효과와 정장석(굵은 모래) 함량의 복합적 요인에 의해 조절되었다. 농축 인자(enrichment factor) 및 약산(1 M HCl) 용출 실험 결과 천수만 퇴적물에서 미량 금속은 농축되지 않았음을 알 수 있었으며 금속의 농도는 퇴적물의 지화학적 특성들로 잘 설명되었다. 특징적으로 As는 조립질 퇴적물에서도 세립질 퇴적물과 유사한 농도를 보여주었는데, 이것은 조립질 퇴적물 내 Mn 산화물(용출 부분) 및 정장석(잔류 부분)과 밀접한 관련이 있는 것으로 해석되었다. 따라서 퇴적물 중 As의 농축 정도를 평가할 경우, 모래질을 포함하는 시료는 모래질 부분을 따로 분리하거나 $16{\mu}m$보다 작은 세립질 퇴적물의 함량이 10% 이상인 시료만을 대상으로 하는 것이 합리적인 것으로 판단된다.

역사시대에 분화한 백두산 화산재의 화학 성분 (Geochemical Composition of Volcanic Ash from Historical Eruptions of Mt. Baekdu, Korea)

  • 윤성효;고정선;장철우
    • 암석학회지
    • /
    • 제27권1호
    • /
    • pp.37-47
    • /
    • 2018
  • 백두산에서 역사시대에 분화한 화산재의 시료에 대하여 다양한 방법으로 주성분과 미량성분을 분석하였다. 화산재의 주성분 원소 함량은 $SiO_2$ 58.8~71.1 wt.%, $Al_2O_3$ 9.6~16.8 wt.%, ${Fe_2O_3}^T$ 4.5~6.9 wt.%, MgO 0.1~1.7 wt.%, CaO 0.3~1.6 wt.%, $Na_2O$ 5.2~6.3 wt.%, $K_2O$ 4.3~5.9 wt.% 그리고 $TiO_2$ 1.2 wt.%이하로 분석되었다. Ba, Cu, Cr. Co, Ni, Sr, V, Zn와 Zr을 포함하는 32개 미량원소가 분석되었는데, 이들 화산재는 일부 미량원소와 경희토류 원소의 부화정도에 따라 두 그룹(그룹 A, 그룹 B)으로 구분되며, 그룹 A에는 1천년 전의 밀레니엄 분화물, 1668년과 1903년 분화물이, 그룹 B에는 1702년 분화물이 해당된다. 중금속원소인 Cu, Co, Zn, Mn 등은 소량 함유되어 나타난다. 백두산 화산재는, 섭입대 기원의 일본 사쿠라지마 화산의 화산재와 비교하여, 미량성분원소 중 Y, Nb, Pb, U, Sc, V, Ni 그리고 Cu 함량은 낮게 나타나며, Zr, Ba, Hf, Cr, Co, Zn 그리고 희토류(Eu제외) 등은 높은 함량을 나타낸다.

첨가제에 의한 0.05PAN-0.95PZT계 세라믹의 유전 특성에 관한 연구 (A study on the dielectric characteristics of 0.05PAN-0.85PZT ceramics with additive)

  • 김현철;신혜경;김진섭;윤현상;배선기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.1661-1663
    • /
    • 2000
  • This study was to measure the dielectric characteristics of 0.05Pb($Al_{0.5}Nb_{0.5}$)-0.95Pb($Zr_{0.52}Ti_{0.48})O_3$[PAN-PZT] system ceramics according to the variation of $Cr_{2}O_3$, $Fe_{2}O_3$ addition amount. 0.0$\sim$1.2[wt%] and according to sintering temperature after creating the specimens with a general sintering way. The results of this study were summarized as follows : the dielectric constant at 20[$^{\circ}C$] reduced dy increasing additive on the whole. The dielectric loss was minimum value of 12.77[%], sintered at 1200[$^{\circ}C$], dopped with $Cr_{2}O_3$ 0.3[wt%] and minimum value of 10.89[%], sintered at 1200[$^{\circ}C$], dopped with $Fe_{2}O_3$ 0.6[wt%]. The variation rate of dielectric constant according to the change of frequency was decreased slowly by increasing frequency. The temperature coefficient of capacitance turned out increasing the stability of the temperature, decreased $Cr_{2}O_3$ 0.3wt% showed its minimum value 0.59[%/$^{\circ}C$], the maximum value 0.9[%/$^{\circ}C$] with $Cr_{2}O_3$ 3wt%.

  • PDF

CCT-ICP-MS의 대기분진내 미량원소분석에 대한 적용성 (Applicability of CCT-ICP-MS for the Determination of Trace Elements in Airborne Particulate Matters)

  • 임종명;이진홍;서만철
    • 한국대기환경학회지
    • /
    • 제20권3호
    • /
    • pp.397-409
    • /
    • 2004
  • There has been few studies of either domestic or international to apply CCT-ICP-MS for the precise analysis of As and Cr components associated with airborne particulate matter. To date, the use of CCT-ICP-MS is strongly recommended for the accurate analysis of the toxic trace metals; this is because CCT-ICP-MS technique prevents polyatomic spectral interferences involved in the determination of As and/or Cr components. Taking advantage of CCT-ICP-MS technique, the measurements of about 20 metals were undertaken in this study. The standard reference material (NIST SRM 2783) was used for analytical quality control. To improve analytical accuracy and of acid efficiency, we selected nitric acid based on a test of three kinds of acid for microwave digestion method 1 ) nitric acid. 2) nitric acid and hydrogen peroxide. and 3) nitric acid and perchloric acid. When this method was employed, relative errors to SRM values of Al, As, Cr Fe, Mg, Mn, Pb, Sb, V, and Zn fell below 20%, while those or Ca, Si, and Ti were higher than 20%. The overall results of our study show that the concentrations of As and V determined by CCT-ICP-MS were satisfied with the certificated values within a relative error of 20e1c, whereas those determined by ICP-MS were 10 times higher than the certificated values.

광주.전남지역 목조 고건축물에 사용된 단청안료에 대한 연구 (A Study on Dancheong Pigments of Old Wooden Building in Gwangju and Jeonnam, Korea)

  • 장승욱;박영석;박대우;김종균
    • 자원환경지질
    • /
    • 제43권3호
    • /
    • pp.269-278
    • /
    • 2010
  • 우리는 단청안료의 착색제에 대한 특성을 살펴보았고, 이번 연구가 우리 전통 단청의 색을 재현하는데 기여하길 바란다. 광주 전남지역 목조 고건축물에서 자연적으로 박리가 일어난 부분의 단청안료 시료를 채취하고, 이를 XRD와 EDS-SEM분석을 이용하여 착색제를 분석하였다. 백색안료에서는 고대부터 착색제로 사용되어온 석고$(CaSO_4{\cdot}2H_{2}O)$,석영$(SiO_2)$, 백연석$(PbCO_3)$ 및 호분$(CaCO_3)$과 현대에서 많이 사용되는 산화지당$(TiO_2)$이 모든 시료에서 확인되었다. 적색안료에서는 고대부터 착색제로 사용된 석간주$(Fe_{2}O_{3})$와 연단$(Pb_{3}O_{4})$ 및 현대안료 착색제인 C. I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$이 확인 되었지만, 진사(cinnabar, HgS)는 관찰되지 않았다. 황색안료에서는 납을 주성분으로 하는 황연인 홍연석$(PbCrO_4)$과 고대부터 사용된 밀타승(PbO)이 확인되었다. 청색안료에서는 착색제인 소달라이트 $(Na_{4}BeAlSi_{4}O_{12}Cl)$와 노제안$(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$이 확인되었으며, 현대안료 착색제인 C. I. pigment blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ 도 확인되었다. 녹색안료에서는 착색제로 카루머타이트(calumetite, $Cu(OHCI)_{2}{\cdot}2H_{2}O$), 에스콜라이트$(Cr_{2}O_{3})$, 디크롬트리옥사이드(dichromium trioxide, $Cr_{2}O_{3}$), 에머랄드그린$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$ 및 현대안료 착색제인 C. I. pigment green$(C_{32}H_{16}-XCl_{x}Cu_{8})$이 확인되었다. 흑색안료에서는 먹(송연)이 확인 되었다.

우리나라 충남지역 활석광상에서 산출되는 녹니석의 화학적 및 투과전자현미경 연구 (Chemical and TEM Studies of Chklorites in the Talc Deposites of the Chungnam Area, Korea)

  • Geon-Young Kim;Soo Jin Kim
    • 한국광물학회지
    • /
    • 제13권2호
    • /
    • pp.53-64
    • /
    • 2000
  • Chlorite from the talc deposits in the Chungnam area, Korea, has been studied using electron microprobe analysis and high resolution transmission electron microscopy (HRTEM), Talc orea are hydrothermal alteration products of serpentinite which was originated from ultramafic rocks. Chlorite occurs in close association with talc ores of with the black alteration zone between talc ore bodies and granitic gneiss. It is the most abundant impurity mineral of talc ores. Chlorite in association with talc is characterized by very high but narrow variation in Mg/(Mg+Fe) ratios (0.784~0.951), significant octahedral substitution (-0.200~0.692), wide variation in Al contents (1.085~3.160 / 14 oxygens), and high Cr and Ni contents. It was formed under a very limited but high Mg/(Mg+Fe) condition in close connection with serpentinite. Chlorite in the black alteration zone is characterized by a high Fe content, wide variation in Mg/(Mg+Fe) ratios (0.378~0.852), narrow octahedral substitution (-0.035~0.525), high narrow Al contents (1.468~2.959), and low Cr and Ni contents. It was formed under a low Mg/(Mg+Fe) and relatively Al-rich condition in close connection with county rocks. Two different chemical modes for chlorite suggest two different origins for two different chlorites. Although most of chlorites show typical 14-$\AA$ lattice fringe images under HRTEM, some chlorites show fringe images of 21-$\AA$ (14$\AA$+7$\AA$) spacings within (001) lattice-fringe images of chlorite (14$\AA$). But brown chlorite from the black zone has high Ti and K contents suggesting that mica was the precursor of brown chlorite. Such possibility is also supported by the fact that lattice-fringe images of brown chlorite show 14-$\AA$ chlorite layers in which 10-$\AA$ mica single layer or packets are interlayered. Partial terminations from 3 mica layers to 2 chlorite layers are often observed. It, therefore, is suggested that the chlorite associated with talc ores is a hydrothermal alteration products of serpentinite, whereas the chlorites in the black alteration zone is a hydrothermal alteration product of granitic gnesis under a partial influence of serpentinite.

  • PDF

몽골산 크롬철광 중의 금속성분 분석 (Determination of Metal Elements in Mongolian Chromite)

  • 최광순;이창헌;표형렬;박순달;조기수
    • 분석과학
    • /
    • 제13권6호
    • /
    • pp.766-774
    • /
    • 2000
  • 유도결합 플라스마 원자방출분광법(ICP-AES)을 이용하여 몽골산 크롬철광의 성분을 분석하였다. 크롬철광을 용해시키기 위하여 과염소산-인산의 흔합산과 융제로서 $Na_2O_2$의 적용성을 검토한 결과 최적의 용해방법은 용융법이었다. 크롬광의 주성분과 미량성분을 ICP-AES로 정량할 때 과량의 Na가 측정파장에 미치는 영향을 조사하였다. Al, Cr, Fe 및 Mg과 같은 주성분원소의 경우 Na가 250 mg/L까지 영향을 받지 않았으나, Co, Ni, Ti, V 및 Zn과 같은 미량성분들은 Na가 1,250 mg/L인 경우 측정원소와 파장에 따라 방출선의 세기는 1-5% 정도 감소하였다. 본 방법의 정확도를 확인하기 위하여 중성자방사화분석으로 얻은 결과와 상대편차를 비교하였다. $Al_2O_3$, $Cr_2O_3$, FeO 및 MgO의 경우에는 FeO를 제외하고 상대편차가 5% 이내이며, Co, Mn, V 및 Zn의 경우에는 ~20-8% 범위였다.

  • PDF

TiMn2계 수소저장합금의 수소화에 따른 부피팽창 (Volume Expansion of TiMn2-type Hydrogen Storage Alloy with Hydrogenation)

  • 박충년
    • 한국수소및신에너지학회논문집
    • /
    • 제28권5호
    • /
    • pp.459-464
    • /
    • 2017
  • The volume expansions of $Ti_{0.95}Zr_{0.05}V_{0.4}Mn_{1.45}Fe_{0.1}Cr_{0.05}$ alloy during hydrogenation with various conditions have been investigated. The theoretical volume expansion measured with XRD for this alloy with hydrogenation was 21%. The apparent volume expansion of this alloy ingot with hydrogenation was composed of two effects. One is a hydrogenation and the other is a pulverization. The apparent volume of free alloy powder was 1.8 times greater than that of an ingot, implying the pulverization effect on the apparent volume expansion is 80%. The apparent volume expansion of the alloy ingot with hydrogenation under a unconstrained condition was about 80 (${\pm}15$)%, much smaller than that of free alloy powder which expected as 118%. In addition, The apparent volume expansion of the alloy ingot with hydrogenation under a constrained condition(Al container) was about 50%, much smaller than that of the unconsrained. This reduced apparent volume expansion of the alloy ingot could be attributed to an arrangement of alloy powder keeping its original shape of the ingot even after hydrogenation.

외국 공공연구기관의 단설대학원 운영사례연구

  • 김정흠;김갑수;김전식;이규호;이병민;조붕제;현병환
    • 한국기술혁신학회:학술대회논문집
    • /
    • 한국기술혁신학회 1998년도 춘계정기학술대회
    • /
    • pp.8-8
    • /
    • 1998
  • 한 국가의 경쟁력은 여러 가지 생산요소들의 질적·양적 우위에 의해 결정되나, 그 중에서도 특히 기술이 체화된 인적자원이 경쟁력 확보의 핵심요소임은 재론의 여지가 없다. 과거 우리나라 급성장의 주요 원동력이었던 우수하고 풍부한 인력이 이제 더 이상 우리 경쟁력의 원천이 되지 못하고 있다. 무한경쟁시대를 이끌어갈 창의력과 지도력을 갖춘 고급기술인력이 부족하고, 우수한 기술인력이 과학기술계를 회피하고 있으며, 산업현장에서 실제문제를 해결할 수 있는 실천적 전문기술과 숙련된 기능을 제대로 갖춘 인력을 배출하지 못하고 있다. 이러한 기숙인력 양성의 문제들을 해결하기 위한 방안의 하나로서 일반대학과 별도로 기술인력양성을 전문으로 하는 학위과정 설치의 필요성이 대두되었으며, 1996년 교육개혁의 일환으로 단설대학원제도와 전문학위제도가 시행되기 시작하였다. 그동안 여러 분야에서 단설대학원 설립이 추진되었으며, 일부에서 운영이 시작되고 있으나 과학기술분야에서는 극히 일부의 사례만이 있을 뿐이고 아직 본격적으로 설립운영되고 있다고 보기 어렵다. 본고는 외국 공공연구기관에서 시행되는 단설대학원의 사례들을 조사 분석함으로써 우리나라 과학기술계 출연연구기관에서의 바람직한 운영모델을 제시하고자한다. 일본의 총합연구대학원대학과 연계대학원제도, 중국 국가연구소들의 학위수여제도, 프랑스 국가연구소들의 석·박사과정, 독일 연구기관들의 박사과정 등을 소개하며, 이 들의 특징과 장단점들을 비교한다. 이어서 우리나라에서 현재 진행되고 있는 현황을 분석하고, 과학기술계 출연연구기관의 단설대학원 설립의 방향과 활성화를 위한 개선방안 등을 제시한다. 보고하였다2) 이 경우 보호피막으로서 NiO 와 $LiCrO_2$가 작용하는데, $LiCrO_2$가 용융탄산염 중에서 보다 안정한 것으로 부터, Cr의 첨가가 내식성에 기여하는 것으로 판단하였다. 다음 단계 로서 Fe/Cr재료에 용-융탄산염 중에서 안정한 산화물을 형성하는 Al의 첨가효과를 검토하였다. Al의 첨가는 더욱 내식성을 향상시키는 것이 발견되었고, 약 4wt%의 첨가로 충분한 내식성을 가지 는 것을 보고 하였다. 그러나 이러한 안정한 산화물에 의한 내식성 향상은 전기진도도의 희생을 바탕으로 한 것으로서, 다읍 단계로서 Ti산화물의 반도체적인 특성을 이용하고자 제 4의 원소로서 Ti첨가를 시도하였다. 그러나 Fe/Cr/AVTi재료가 뛰어난 내식성을 가지는 것은 관찰되었으나, 전도도 향상에는 기여하지 못하는 것이 보고되었다. 현재 MCFC는 실용화를 위한 고성능화의 하나로서 가압하에서의 운전을 시도하고 있다. 이 러한 가압하에서의 운전은 기전력의 향상 및 전극반응의 촉진 등으로 출력의 향상을 가져오나. 현재 문제로 되고 있는 Cathode극인 NiO의 용해/석출 현상을 가속화하는 결과를 초래해, 이에대 한 대책으로서 Li-K보다 NiO의 용해가 적은 Li-Na탄산염으로의 전환이 진행되고 있다. 이러한 배경으로부터 Uchida그룹에서 개발한 FeiCr/AVTi재료와 현재 분리판 재료로 사용증인 SUS 310, S SUS 316재료에 대해. 산화성 분위기의 5기압까지의 가압하에서, Li-K, Li-Na탄산염에 대하여 부 식거동을 검토한 결과, 가압하에서 내식성이 향상되는 것이

  • PDF

Hydrogen Evolution Ability of Selected Pure Metals and Galvanic Corrosion Behavior between the Metals and Magnesium

  • Luo, Zhen;Song, Kaili;Li, Guijuan;Yang, Lei
    • Journal of Electrochemical Science and Technology
    • /
    • 제11권4호
    • /
    • pp.323-329
    • /
    • 2020
  • The cathodic hydrogen evolution ability of different pure metals and their long term galvanic corrosion behavior with pure Mg were investigated. The hydrogen evolution ability of pure Ti, Al, Sn and Zr is weak, while that of Fe, W, Cr, and Co is very strong. Initial polarization test could not completely reveal the cathodic behavior of the tested metals during long term corrosion. The cathodic hydrogen evolution ability may vary significantly in the long term galvanic tests for different metals, especially for Al whose cathodic current density reduced to 1/50 of the initial value. The anodic polarization shows that Al and Sn as alloying elements are supposed to provide relatively good passive effect for Mg alloy, while Ag can provide a slight passive effect and Zn has little passive effect.