• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.342-347
• /
• 2009

We sought to improve the methods for washing fresh raw ginseng. The quality of ginseng surface-washed by different methods was evaluated during storage at 10C and $20^{\circ}C$. The raw ginseng surface-washing method was a full-cone spray-type procedure using water and air. The water for decontamination had an electrolysis value of 80 ppm, also known as electrolysis water $2^{\circ}C$ water and water containing 5 ppm chlorine dioxide, were also used for decontamination. The Hunter color (${\Delta}E$) of ginseng washed with water withan electrolysis value of 80 ppm, or water with 5 ppm chlorine dioxide, was greater than that seen after other washing methods were used. The weight loss after washing with 5 ppm chlorine dioxide water was similar to that seen after washing with $2^{\circ}C$ water or 80 ppm electrolysis water. Reductions in total microorganism levels, and counts of yeasts and molds, assayed 10 days after washing with 5 ppm chlorine dioxide water were greater than seen after use of other sterilization methods. Quality maintenance on storage, at both 10C and 20C, after washing with 80 ppm electrolysis water, was better than that noted after other sterilization methods. The moisture content of washed ginseng was similar under all storage conditions tested.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.12-23
• /
• 2019

This study aims to suggest analysis schemes of urban forests acting as wind ventilation corridor(wind ventilation forest). For this purpose, wind corridor forests were classified into three types: wind-generating forests(WGF), wind-spreading forests (WSF), and wind-connecting forests(WCF), and they were classified into three grades. WGF, WSF and WCF were classified based on the density of forest type map, vegetation index, and ventilation networks, respectively. As a result of analyzing wind corridor forests for Daegu Metropolitan City(883.56㎢), the area of WGF was classified as 443.1㎢ and distributed in the northern and southern regions of Daegu Metropolitan City. Among them, the first grade of WGF occupied the largest area(345.59㎢) and the highest rate(54.44%) in Dalseong-gun. On the other hand, WGF was not found in Jung-gu, because this administrative district is isolated from the forest area. WSF was 32.4㎢, which included representative urban parks of Daegu Metropolitan City, and WSF were found relatively much in Suseong-gu and Dalseong-gun. However, WSF were distributed throughout Metropolitan City, and the vegetation index was not high. The ventilation network that can form WCF included major rivers and roads in Daegu Metropolitan City, but this network was not connected to the urban park from the outer forest. Therefore, it was judged that the formation of WCF connecting WGF outside the city and WSF inside the city would be important. The results of this study can be used as a basic data for systematic wind corridor forest projects, and can be used as basic data for establishing guidelines for wind corridor forest analysis at national and local levels.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.5
• /
• pp.654-661
• /
• 1999

Background : The upper respiratory tract is the primary target organ of various airborne pollutants and is easily accessible part of the respiratory tract, and also is the predominant structure where chronic cough originates. The nasal peak inspiratory flow(PIFn), which is the peak inspiratory flow via nose with nasal mask and spirometry, could be a reliable parameter of nasal obstruction. The validity of PIFn has been evaluated in several studies by assessing the correlation between PIFn measurements and other parameters of nasal air flow. This study was designed to show the reproducibility of PIFn, the difference of PIFn between patients with chronic cough and normal subjects, and the usefulness of PIFn in the evaluation of nasal obstruction in patients with chronic cough. Methods : PIFn was measured by spirometry with nasal mask, twice a day for 3 consecutive days in 7 young normal subjects to evaluate validity of the test. In 32 patients with chronic cough and 25 age-matched normal subjects, PIFn and pulmonary function test($FEV_1$, $FEV_1%$ pred, FVC, and FVC% pred) were measured at first visiting. Results : Values of PIFn, $FEV_1$, and FVC were nearly constant in 7 young normal adults. Patients with chronic cough were 32 (14 males and 18 females) and the mean age was $41.4{\pm}15.9$ years. Normal subjects were 32(22 males and 10 females) and the mean age was $39.8{\pm}18.6$ years. There was no significant difference of age and pulmonary function test between patients with chronic cough and normal subjects(p<0.05). The PIFn values in patients with chronic cough was significantly lower than those of normal subjects($2.25{\pm}0.68\;L/sec$ vs. $2.75{\pm}1.00\;L/sec$ ; p=0.02). The postnasal drip syndrome(PNDS) comprised the majority of patients with chronic cough(27). The PIFn in patients with PNDS was significantly lower than that of normal subjects (mean$\pm$SD ; $2.18{\pm}0.66$ vs. $2.75{\pm}1.00\;L/sec$, p=0.006). Conclusion : There was a significant difference of PIFn between patients with chronic cough and normal subjects. Among the patients with chronic cough, patients with PNDS showed the most significant difference with normal subjects in PIFn. The PIFn could be a useful parameter of nasal obstruction in patients with chronic cough, especially in patients with PNDS.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.5
• /
• pp.773-780
• /
• 2000

Background : pH measurement is an important test in assessing the etiology of pleurisy and in identifying complicated parapneumonic effusion. Although the blood gas analyzer is the gold standard method' for pleural pH measurement, pH meter & pH strip methods are also used for this purpose interchangably. However, the correlation among the pH data measured by the three different methods needs to be evaluated. In this study, we measured the pH of pleural fluid with the three different methods respectively and evaluated the correlation among the measured data. Methods : From August 1999 to March 2000, we measured the pleural fluid pH in 34 clinical samples with three methods-blood gas analyzer, pH meter, and pH strip. In the blood gas analyzer and pH meter methods, the temperature of pleural fluid was maintained around $0^{\circ}C$ in air-tight condition before analysis and measurement was performed within 30 minutes after collection. As for the pH strip method, the pleural fluid pH was checked in the ward immediately after tapping and in the clinical laboratory of our hospital. This part is unclear. Results : The causes of pleural effusion were tuberculosis pleurisy in 16 cases, malignant pleural effusion 5 cases, parapneumonic effusion 9 cases, empyema 3 cases, and congestive heart failure 1 case. The pH of pleural fluid (mean$\pm$SD) was 7.34$\pm$0.12 with blood gas analyser, 7.52$\pm$0.25 with pH meter, 7.37$\pm$0.16 with pH strip of immediate measurement and 6.93$\pm$0.201 with pH strip of delayed measurement. The pH measured by delayed pH strip measurement was lower than those of other methods (p<0.05). The correlation of the results between the blood gas analyzer and pH meter(p=0.002, r=0.518) and the blood gas analyzer and pH strip of immediate measurement(p<0.001, r=0.607). Conclusion : In the determination of pH of pleural fluid, pH strip method could be a simple and reliable method under immediate measurement conditions after pleural fluid tapping.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.334-342
• /
• 2016

In order to evaluate the modified installation methods of roof ventilation devices, derived from the previous experiment ('investigation into the optimum capacity of roof ventilation devices and their deployment'), the conventional and modified (improved) roof ventilation systems were installed in the single-span plastic greenhouse for growing oriental melons. The roof vents ($60{\varphi}$) and roof fans (maximum air capacity of $38m^3/min$) were installed in the spacing of 15m (FT, modified 'side vent+roof fan' ventilation) and 6m (TT, modified 'side vent+roof vent' ventilation) respectively on the roof of greenhouses for the modified roof ventilation treatments, and 20m (FC, conventional 'side vent+roof fan' ventilation) and 8m (TC, conventional 'side vent+roof vent' ventilation) for the conventional ones. The stem diameter, leaf blade lengh, petiole length, and leaf width were lower in the FT and TT treatments than those in the conventional treatments, FC and TC. Although the fruit weight and total yields were slightly lower in the FT and TT treatments, the marketable fruit ratio (%) were higher, as a result of increased fruiting ratio (%) in these treatments, than those of FC and TC. The marketable yields (kg/10a) in the FT and TT treatments were 8,391 kg/10a and 7,283 kg/10a, which were respectively 661 kg/10a and 487 kg/10a higher than those in the treatments of FC and TC. The modified installation methods of roof fan resulted in production of more female flowers and lower fruit drop ratio (%) compared to conventional meathods. In the treatment of the conventional ventilation with roof vent, the fruit weight, fruit length & width, and flesh thickness were higher than in other treatments, but there were no significant differences in the fruit width and flesh thickness among the treatments.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.225-231
• /
• 2016

Glasshouse heating package technologies to improve energy usage efficiency in winter were developed. Heating package was composed of the ground water source heat pump with heating capacity of 105kW, the aluminum multi-layer thermal curtain with six layers of different materials and the root zone local heater with XL pipes of ${\phi}20mm$. Venlo type glasshouse($461m^2$) with the heating package was compared with the same type and area control glasshouse with the light oil boiler, the usual non-woven fabric thermal curtain with respect to the glasshouse inside temperature, relative humidity, crop growth, and heating energy consumption. The results of test in paprika cultivation glasshouses showed that the air temperature inside glasshouse with aluminum multi-layer thermal curtain was maintained $2.2^{\circ}C$ higher than that of control glasshouse in un-heating night time and the temperature in bed with root zone local heating was $4.7^{\circ}C$ higher than that in bed without local heating. Average heating coefficient of performance(COP) of the ground water source heat pump used in paprika cultivation was 3.7 and the glasshouse inside temperature was maintained at $21^{\circ}C$ of heating set up temperature. The heating energy consumptions per 10a were measured at 14,071L of light oil and 364kWh of electric power for the control glasshouse and 35,082kWh for the glasshouse applied heating package. As results, the heating cost of the glasshouse applied heating package was 87 percent lower than that of control glasshouse. The growths of paprika in glasshouses of control and applied heating package did not show any significant difference.

• Korean Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.588-595
• /
• 2013

This study investigated the influence of temperature and $CO_2$ increase on phytoplankton growth and community structure during cold water season (spring) in Lake Paldang, Korea. Four experimental treatments of temperature and $CO_2$ manipulation were prepared in the laboratory batch culture: (1) Control; ambient low temperature ($6{\pm}2^{\circ}C$) and low $CO_2$ (air level, $400mgL^{-1}$), (2) T1; low temperature and high $CO_2$ ($800mgL^{-1}$), (3) T2; high temperature ($20{\pm}2^{\circ}C$) and low $CO_2$, (4) T3; high temperature and high $CO_2$. Algal growth experiment was carried out for 10 days under the light intensity of $70{\mu}mol\;m^{-2}s^{-1}$ (L :D=24 : 0). The level of pH decreased in both T1 and T3, due to dissolution of added $CO_2$. The dominant phytoplankton species of ambient water, Cyclotella meneghiniana succeeded to Fragilaria capucina var. gracilis in high-temperature treatment groups (T2 and T3). Cyanobacteria were very rare at the beginning of the experiment, while Oscillatoria limnetica appeared in only high-temperature groups (T2 and T3) at $6{\sim}7^{th}$ day. $CO_2$ addition in ambient temperature (T1) induced the highest phytoplankton growth, and thereby producing the highest average cell density of $3.27{\pm}0.33\;10^4\;cells\;mL^{-1}$, followed by T2 ($2.65{\pm}0.26\;10^4\;cells\;mL^{-1}$), T3 ($2.09{\pm}0.16\;10^4\;cells\;mL^{-1}$), and Control ($1.86{\pm}0.13\;10^4\;cells\;mL^{-1}$) (F=7.167, p=0.000). In summary, temperature increase changed the phytoplankton community structure and $CO_2$ increase promoted the phytoplankton growth during the cold spring season in Lake Paldang, suggesting a potential effect of climate change on freshwater phytoplankton.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.211-218
• /
• 2018

Instant face lifting cosmetics contain various film forming agents for stretching the wrinkles on the skin surface. But, most of the film-forming polymers have sticky feels. And they are easily scrubbed out when skin is rubbed on. In this study, we focused on the influence of sodium silicate that has rapid film forming effect on skin surface and immediate wrinkle reducing effect. Sodium silicate, also known as water glass or soluble glass, is a compound containing sodium oxide and silica. Sodium silicate is a white powder that is readily soluble in water, producing an alkaline solution. Sodium silicate is stable in neutral and alkaline solutions. The sodium silicate solution hardens by drying in air and rapidly forms a thin film. When the solution is applied to the skin, the fine membrane coating is formed by water evaporation and ionic bond re-formation. It also makes the strong siloxane (Si-O) bonding on the skin surface. When these fixation properties are applied to cosmetics, they can give remarkable skin tightening effect. The sodium silicate solution can provide the lifting effect by forming a film on skin at a proper concentration. But, skin irritation may be caused with too high concentration of sodium silicate. We studied a desirable range of the sodium silicate concentration and combination with other fixatives for skin care formulation that has no sticky feels and no scrubbing out phenomenon. Immediate lifting gel was developed by using sodium silicate and various thickening systems. Among of the various thickeners, aluminum magnesium silicate showed the best compatibility with sodium silicate for rapid lifting effect. This instant physical lifting gel was confirmed as a low stimulating formula by skin clinical test.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.591-597
• /
• 2015

We determined the total C and N stocks in trees and soils after 1 year of fertilization in an experimental orchard with 16-year-old 'Niitaka' pear (Pyrus pyrifolia Nakai cv. Niitaka) trees planted at $5.0m{\times}3.0m$ spacing on a Tatura trellis system. Pear trees were fertilized at the rate of 200 kg N, 130 kg P and $180kg\;K\;ha^{-1}$. At the sampling time (August 2013), trees were uprooted, separated into six fractions [trunk, main branches, lateral branches (including shoots), leaves, fruit, and roots] and analyzed for their total C and N concentrations and dry masses. Soil samples were collected from 0 to 0.6 m in 0.1 m intervals at 0.5 m from the trunk, air-dried, passed through a 2-mm sieve, and analyzed for total C and N concentrations. Undisturbed soil core samples were also taken to determine the bulk density. Dry mass per tree was 5.6 kg for trunk, 12.0 kg f or m ain branches, 15.7 kg for lateral branches, 5.7 kg for leaves, 9.8 kg for fruits, and 10.5 kg for roots. Total amounts of C and N per tree were respectively 2.6 and 0.02 kg for trunk, 5.5 and 0.04 kg for main branches, 7.2 and 0.07 kg for lateral branches, 2.6 and 0.11 kg for leaves, 4.0 and 0.03 kg for fruit, and 4.8 and 0.05 kg for roots. Carbon and N stocks stored in the soil per hectare were 155.7 and 14.0 Mg, respectively, while those contained in pear trees were 17.8 and $0.2Mg{\cdot}ha^{-1}$ based on a tree density of 667 trees/ha. Overall, C and N stocks per hectare stored in the pear orchard were 173.6 and 14.2 Mg, respectively. Compared with results obtained in 2012, the amounts of C stocks have increased by $17.7Mg{\cdot}ha^{-1}$, while those of N stocks remained virtually unchanged ($0.66Mg{\cdot}ha^{-1}$).

• Korean Journal of Environmental Agriculture
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2009

This study was aimed at assess environmental conservation functions by analyzing the change of land use areas in agricultural fields between 1999 and 2006, and comparing land surface temperature distribution between 1994 and 2006 in Yongin city. Land use maps of Yongin city were obtained from soil maps for 1999, Quickbird satellite images(less than 1 m) and parcel map for 2006. The land use area for Yongin city was in the order of forest > paddy field > upland > residence & building in 1999, and forest > residence & building > paddy field > upland in 2006. Decrease of paddy and upland fields reduced 34% and 41% of the capability of agricultural multifunctionality as to environment including flood control, groundwater recharge, and air cooling. Land surface temperature(LST) was derived from Landsat TM thermal infrared band acquired in September of 1994 and 2006 and classified into three grades. The results impplied that green vegetation in agricultural field and forest play an important role to reduce land surface temperature in warm season.