• 농촌계획
• /
• 제20권4호
• /
• pp.183-192
• /
• 2014

The purpose of this study is to examine the effect of regional ageing rate to industrial structures of rural areas in Korea. This paper shows that there are cause-effect relations between the industrial specialization and ageing rate in 'Agriculture', 'Finance & Insurance', and 'Real Estate & Leasing' sectors. The ageing levels are classified into ageing society, aged society, and super-aged society according to UN standard that cause different impacts on industrial specialization of regions. This paper finds that the industrial specialization is determined by the ageing levels. If there is an increase in ageing rate by 1% in ageing society, the industrial specialization of the three industries could be strengthened by 0.14%. But, ageing rates have negative impacts on the industrial specialization in aged society and super-aged society by 0.76% and by 1.20%, respectively, as increasing ageing rate by 1%. As the ageing rate progresses, 'Agriculture', 'Finance & Insurance' and 'Real Estate & Leasing'sectors have positive impacts on the industrial specialization in the ageing society. But 'Finance & Insurance' and 'Real Estate & Leasing' sectors have changed into negative impacts on the industrial specialization in the aged society. In the aged society, the employment of elderly persons of 'Agriculture' and 'Finance & Insurance' sectors increase by 1% makes positive impact on the industrial specialization by 1.54%, by 0.45%, respectively. The result of this paper can be applied to a significant guideline at establishing regional employment planning such as elderly customized employment, vocational training for rural areas, where above 14% of ageing rate.

• Nuclear Engineering and Technology
• /
• 제9권3호
• /
• pp.117-123
• /
• 1977

소입된 질칼로이-4의 가공시효(strain ageing) 현상에 미치는 시효시간 및 온도의 효과를 523-588 狂 온도 구간에서 1~52초의 짧은 시효기간에 조사하였다. 이 실험 조건하에서, 가공시효응력은 5.55$\times$$10^{-4}$ sec$^{-1}$ 신연속도(strain rate) 경우 시효시간 및 시효온도가 증가할수록 증가하였다. 소입된 질칼로이-4의 응력부하 하의 가공시효 현상이 두 한계로 나타나는 것이 확인되었는데 첫단계는 0.39ev의 활성화 에너지 값의 구간으로 이는 전위 (dislocation) 주위의 응력상태로 인한 침입형 산소원자들의 Snoek타입의 배열 (ordering)로 인한 것으로 고려되었으며 두번째 단계는 0.6ev 활성화에너지 값을 갖는 구간으로 이는 주로 산소원자들의 장범위확산에 기인하는 것으로 해석되었다.

• 경영과정보연구
• /
• 제18권
• /
• pp.1-19
• /
• 2006

Ageing induces huge dramatic change of society and economy rather than simple change of population structure. Ageing causes the decrease of working age population and production capable population, thus this brings growth slowness and long-term stagnation. In addition, progress in ageing decreases saving rate, consequently low saving rate brings about the decrease of country-wide investment resources. This ageing problem which is progressive rapidly needs core competence and implementation of human resource professionals to overcome this kind of environment change. First of all, it needs turnover in thinking way toward talents. Secondly, we need innovation one team to pursue innovation and creativity. Thirdly, it should be considered in a new way with the number of workers and efficiency of personnel expenses. Fourthly, employees should make effort for self-advancement. Under the environment with newly change human resource personnels' function and role should be emphasized to maintain sustainable growth and overcome the change of management environment. Therefore, human resources should be emphasized to become competitive personnel and organization with leading the change master and creating the value of the organization.

• Nuclear Engineering and Technology
• /
• 제5권1호
• /
• pp.55-64
• /
• 1973

압축변형시킨 순천(0.007% 탄소포함)을 8$0^{\circ}C$이하에서 저온열처리(ageing)한 후, 열처리시간에 따라 증가하는 저항복점(lower yield point)의 변화를 압축시험으로 측정하여 그 strain ageing 효과를 조사했다. 본 실험에서 압축변형된 순철의 strain ageing 속도는 저항복응력의 증가가 그치고 중가의 60% 정도에 이를 때까지 열처리시간의 2/3승에 비례했으나, 이미 알려진 인장변형의 경우에서보다 느렸다. 이 60%의 증가는 순철을 6$0^{\circ}C$에서 약 5시간 열처리함으로써 얻었다. 압축변형된 순철의 strain ageing을 위한 활성화에너지는 열처리의 초기단계(6$0^{\circ}C$에서 약 30분)에서 21,500 cal/mole이었는데, 이것은 인장변형의 경우에서 알려진 것보다 대략 10%가 큰 값이다. 이 증가는 잔유응력에 의해 결정내에 형성되는 strain field로 설명되었다. 열처리공정의 둘깨단계(6$0^{\circ}C$에서 약 5시간까지 계속되는)에서는 그 활성화에너지가 다소 감소되는 경향이 있었다.

• 열처리공학회지
• /
• 제33권4호
• /
• pp.161-172
• /
• 2020

The tensile property of A5082 and A6060 aluminium wrought alloys was investigated, in terms of the strain rate sensitivity on alloy conditions by heat treatment and bake hardenability on pre-strain prior to strain ageing. The tensile test was carried out in a range of strain rate of 4.17 × 10^-5 s^-1 ~ 4.17 × 10^-5 s^-1 in room temperature and the nominal range of pre-strain was 3.0 ~ 10.5%. The tensile deformation of A5082 alloys is characterized as typical case of dynamic strain ageing with negative strain rate sensitivity for all conditions, and the tensile strength indicates a similar level regardless of alloy conditions, except only in full annealed condition. The stress-relief annealing on A6060 alloys can induce practical decrease in strength level of over approximately 100 MPa without any ductility loss, compared to as-rolled condition, while a full annealed and aged condition leads remarkable strengthening effect with the decrease of tensile elongation. Additionally, the bake hardenability of A5082 alloy by strain ageing indicates a negative dependence upon the increase of pre-strain, while A6060 alloy exhibits a positive sign even in low level relatively compared with conventional SPCC.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.668-675
• /
• 2013

We investigate the effect of the ageing time and etching time on the etching rate of SiGe mixed etching solution, namely 1 vp HF (6%), 2 vp $H_2O_2$ (30%) and 3 vp $CH_3COOH$ (99.8%). For this etching solution, we found that the etch rate of SiGe layer is saturated after the ageing time of 72 hours, and the selectivity of $Si_{0.8}Ge_{0.2}$ layer and Si layer is 20:1 at ageing time of 72 hours. The collapse was appeared at the etching time of 9min with etching solution of after saturation ageing time.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.235-239
• /
• 2006

Charge dynamics in polymeric materials after aged under ac electric field using the pulsed electroacoustic (PEA) technique is reported. The emphasis is placed on charge decay. The charge dynamics of the ac aged additive free low density polyethylene (LDPE) samples under dc bias differ from the sample without ac ageing, indicating changes brought in by ac ageing. It is believed that a slow decay rate of charge in the ac aged sample is related to the formation of deep traps in the material. However, chemical analysis by infrared spectroscope (FTIR) and Raman microscope reveals no significant chemical changes taken place in the bulk of the material after ac ageing. Further experiments on irradiated LDPE have revealed a similar behaviour, i.e. the charge decay is slower in irradiated samples than that of fresh sample. The findings presented clearly indicate that space charge measurement can be used as a diagnostic tool to monitor ageing in polymeric materials.

• 한국시스템다이내믹스연구
• /
• 제17권1호
• /
• pp.107-134
• /
• 2016

Accelerated ageing with low fertility is one of the most critical problems in Korea. Because of ageing via low fertility, Korea will face a serious demographic cliff. This research primarily focus on the analyzing the dynamics of the marginal ageing state and decreasing population especially in Eup and Myeon region. This study based on the system dynamics approaches for finding causal loop structure of marginal ageing and critical mass of population disappearing. The results of this study are summarized as follows. First, demographic marginalization trends have already begun in the Eups and Myons of Gun. Second, marginal aging speed in Eup/Myeon areas is causing an population disappearing in the near future. Third, critical mass of population disappearing will begin when the rate of marginal aging is exceed 82% after 2023.

• 대한치과의사협회지
• /
• 제54권6호
• /
• pp.468-474
• /
• 2016

Korean government enacted the 1st Basic Plan for Low Fertility and Population Ageing in 2005 due to the long-lasting ultra-low birth rate. Based on the Act, Korean government set up a step-by-step strategic goal and establish a basic plan, every five years, to achieve the sustainable development of society corresponding to low fertility and aging society. Over the past decade, the 1st Basic Plan for Low Fertility and Population Ageing (2006-2010) and the 2nd Basic Plan for Low Fertility and Population Ageing (2011-2015) was executed. This year, based on the achievements and limitations of the 1st and 2nd Basic Plan, the 3rd Basic Plan for Low Fertility and Population Ageing begins. In this manuscript, I discuss the background of the 3rd Basic Plan and its significance in oral health area.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1994년도 특별강연 및 춘계학술발표 개요집
• /
• pp.44-47
• /
• 1994

The ageing behavior of Cu-bearing HSLA steels was studied by using Differential scanning calorimetry(DSC), Transmission electron microscopy and hardness tester. Two heat evolution peaks were observed during DSC scans over the temperature range of 25～590$^{\circ}C$ at a heating rate of 5$^{\circ}C$/min. The peaks appeared in low (241∼319$^{\circ}C$ : HSLA-A, 224∼310$^{\circ}C$ : HSLA-B) and high temperature (514∼590$^{\circ}C$ : HSLA-A, 451∼558$^{\circ}C$ : HSLA-B) are attributed to the formation of coherent Cu-clusters and noncoherent $\varepsilon$-Cu phase, respectively. It was confirmed that as ageing proceeds, the coherent bcc Cu-clusters transform to noncoherent fcc $\varepsilon$-Cu phase. In the case of the ageing to peak hardness at 300$^{\circ}C$ and 400$^{\circ}C$, the coherent Cu-clusters contributed to the hardening. As ageing time and temperature increase over peak hardness, noncoherent $\varepsilon$-Cu are formed and hardness decreases.