• Journal of Aerospace System Engineering
• /
• v.14 no.3
• /
• pp.10-16
• /
• 2020

We propose a capture mechanism based on the principles of fishing nets that can be mounted on the drone using cable. The gripper mechanism, mainly proposed for the drone is heavy, and is limited to catch standardized objects. In contrast, the proposed capture device in this paper is light, flexible, and can capture various types of objects from a long distance. The theoretical relationships between cables and mechanisms were analyzed. Finally, the capture device was designed and manufactured to be installed in the drone (DJI S900) to conduct capturing experiments for various objects and verify the validity.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.114-124
• /
• 2019

The drone market, an unmanned aerial vehicle, is rapidly expanding and developing into an important area related to the huge changes in the traffic system of the future. With various technologies on the fourth industrial revolution, including drones, mentioned at the Davos Forum in January 2016, interest in drones is emerging as an explosive demand for national certificates. The number of drone pilots, which was only 400 in 2015, is continuing to surpass 17,000 as of 2018. Therefore, this study analyzed the safety perception of the pilots based on the DREEM (Dundee ready environmental assessment) model designed to evaluate the educational environment along with the current state of drone education in Korea. This led to the conclusion that the high level of satisfaction of the pilot with the educational environment contributes to the overall safety perception, including compliance with procedures.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1043-1050
• /
• 2020

In this study, a study was presented on the monitoring technique of landslide area using UAV. In the case of disaster investigation using drone mapping, it can be used at various disaster sites. The mission can be carried out at various disaster sites, including surveys of damage to mountainous areas caused by landslides, building collapses surveys of flood damage, typhoons, earthquakes. The damage investigation plan using drone mapping is expected to be highly utilized at disaster sites where investigators cannot access it like in mountainous areas and where it is difficult to conduct direct damage investigations at the site. Drone mapping technology has many advantages in terms of disaster follow-up, such as recovery. Compared to the existing survey system, which was mainly carried out manually, the investigation time can be drastically reduced, and it can also respond to disaster sites that are difficult to carry out or are difficult to access directly. In addition, it is possible to establish and guide spatial data at the disaster site based on accurate mapping data from the time of the disaster, which has considerable strength in managing the situation of the disaster site, selecting priority areas for recovery, and establishing recovery plans. As such, drone mapping is a technology that can be used in a wide range of sites along with natural disasters and social disasters. If a damage investigation system is established through this, it is believed that it will contribute significantly to the rapid establishment of recovery plans along with the investigation of disaster response time and extent of damage recovery.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.575-580
• /
• 2023

This study was prevent the decrease in crop output by insect pests and spraying by application uniformity. A flight level 4 m height and 4-5 m/sec. speed are difficult to maintain with a agricultural drone for aerial application, which has been affected by the methods or environmental factors, such as changes in the wind. Therefore, which can allow a controlled application width and spray rate automatically and verified experimentally using drone. The sprayed particles began to decrease from about 3.75 m on the left and right sides of the spray nozzle. According to the number of particles, the effective spraying width was observed to be about 7.5 m, and it was verified that the proposed spraying system was effective in uniform control system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.301-307
• /
• 2018

Unmanned Aerial Vehicles (i.e., drone) are gaining a lot of interest from a wide range of application domains such as infrastructure monitoring and parcel delivery service. In those service scenarios, multiple UAVs are involved and should be reliably operated by so-called UAV management system. For that, we propose oneM2M standard based UAV management and control system which is specifically targeted at traffic management of low-altitude UAVs. In this paper, we include oneM2M platform architecture and its implementation for UAV management system in conjunction with UAV interworking procedure.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.243-251
• /
• 2021

Real-Time Kinematic (RTK) is a phase-based differential GNSS technique and uses additional observations from permanent reference stations to mitigate or eliminate effects like atmospheric delays or satellite clocks and orbit errors. In particular, as the position accuracy required in the fields of autonomous vehicles and drones is gradually increasing, the demand for RTK-based precise navigation that can provide cm-level position is increasing. Recently, with the rapid growth of the open-source software market, the use of open-source software for building navigation system of unmanned vehicles, which is difficult to mount an expensive GNSS receivers, is gradually increasing. RTKLIB is an open-source software package that can perform RTK positioning and is widely used for research and education purposes. However, since the performance and stability of RTK algorithm of RTKLIB is inevitably inferior to that of commercial GNSS receivers, users need to verify whether RTKLIB can satisfy the navigation performance requirements of unmanned vehicles. Therefore, in this paper, the performance evaluation of the RTK positioning algorithm of RTKLIB was performed using GNSS observation data acquired in a dynamic environment. Therefore, in this paper, the RTK positioning performance of RTKLIB was evaluated using GNSS observation data acquired in a dynamic environment. Our results show that the current RTK algorithm of RTKLIB is not suitable for precise navigation of unmanned vehicles.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.74-80
• /
• 2022

The utilisation of small drones is becoming increasingly widespread particularly in the military sector. In this study, STANAG 4586, a standard interface for military unmanned aerial vehicles, was applied to a multicopter-type small drone to examine the suitability of the military system. To accomplish this, a small multi-copter vehicle was designed and manufactured, integrating a flight control computer, ground control system, and data link. Furthermore, flight control and ground control equipment software were developed by applying the STANAG 4586 interface, followed by HILS and flight tests.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.3
• /
• pp.125-132
• /
• 2023

Roundabouts have strengths in traffic flow and safety but can present difficulties for inexperienced drivers. Demand to acquire and analyze drone images has increased to enhance a traffic environment allowing drivers to deal with roundabouts easily. In this paper, we propose a roundabout traffic analysis system that detects, tracks, and analyzes vehicles using a deep learning-based object detection model (YOLOv7) in drone images. About 3600 images for object detection model learning and testing were extracted and labeled from 1 hour of drone video. Through training diverse conditions and evaluating the performance of object detection models, we achieved an average precision (AP) of up to 97.2%. In addition, we utilized SORT (Simple Online and Realtime Tracking) and OC-SORT (Observation-Centric SORT), a real-time object tracking algorithm, which resulted in an average MOTA (Multiple Object Tracking Accuracy) of up to 89.2%. By implementing a method for measuring roundabout entry speed, we achieved an accuracy of 94.5%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.312-314
• /
• 2021

The government sees drones as a key future growth engine, prepares plans to foster the nation-led drone industry, conducts pilot projects in various fields, such as transporting goods, forest protection, monitoring, facility safety diagnosis, and is actively in the use of drones. In particular, the police are attempting to use drones to search for missing people. However, existing drones have a short operating time due to the limitation of battery time. The effectiveness of the existing drones is insufficient because it has no choice but to search by aerial photography on the mountain tops in hillside or dense forest. In this study, we propose an FPV drone that utilizes virtual reality as a drone that can overcome the limitations of searching for missing people.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.7-9
• /
• 2020

현재 드론을 이용한 측량 기술은 '드론 사진측량' 방식이 일반적이다. '드론 사진측량' 방식은 드론의 고질적인 문제점인 배터리 문제와 모델링 시 시간이 오래 소요된다는 단점이 있다. 따라서 효율적이고 새로운 방식의 드론 측량 기법이 필요한 실정이다. 본 논문에서는 드론을 활용하여 수치지적의 경계점 좌표 기반의 새로운 측량 방식을 제안하여 경계 복원 측량의 효율성을 향상시키고자 한다.