• 한국광학회지
• /
• 제30권4호
• /
• pp.142-145
• /
• 2019

일반적으로 체적형 방식의 디스플레이에는 큐브-모서리 재귀반사(corner cube retroreflector, CCRR)시트와 반투과 거울판이 사용되며, 이는 광원의 빛을 재귀반사시켜 부양영상(floating image)을 만든다. 이러한 기존 CCRR 방식은 광원의 강도를 1/4로 줄이는 반투막 투과 2회의 광손실과 각 단위 CCRR 크기에 의한 영상의 퍼짐 현상이 있다. 본 연구진이 제안하는 '혼성-병풍형' 구조 재귀반사(hybrid-t(transverse directional)-RRMA)는 광퍼짐을 최소화하여 부양영상의 품질을 향상시킬 뿐만 아니라, 광도를 4배로 높이며, 제작상의 편리함도 제공한다. '선형 v자 홈' (linear v-shaped groove)을 '포물선 v자 홈' (parabolic v-shaped groove)모양으로 조절한 재귀반사로 영상의 퍼짐을 개선하여 부양영상을 최적화하였고, '평면(flat wall) 재귀반사' 대신 '곡면(curved planar wall)-재귀반사' 구조를 적용한 '곡면-병풍형-재귀반사판'을 사용하여 반투과 거울판을 없애 반투막에 의한 광손실을 개선하고, 시스템을 단순화하였다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권2호
• /
• pp.105-121
• /
• 2017

Purpose It is a major goal to improve the product yields during production operations in the manufacturing industry. Therefore, factory is trying to keep the good quality materials and proper production resources, also find the proper condition of facilities and manufacturing environment for yields improvement. Design/methodology/approach We propose the hybrid framework to analyze to dataset extracted from MES. Those data is about the alarm information generated from equipment, both measurement and equipment process value from production and cycle/pitch time measured from production data these covered products during production. We adapt a data warehousing techniques for organizing dataset, a logistic regression for finding out the significant factors, and a association analysis for drawing the rules which affect the product yields. And then we validate the framework by applying the real data generated from the discrete process in secondary cell battery manufacturing. Findings This paper deals with challenges to apply the full potential of modeling and simulation within CPPS(Cyber-Physical Production System) and Smart Factory implementation. The framework is being applied in one of the most advanced and complex industrial sectors like semiconductor, display, and automotive industry.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권9호
• /
• pp.2458-2482
• /
• 2023

Medical image segmentation techniques based on convolution neural networks indulge in feature extraction triggering redundancy of parameters and unsatisfactory target localization, which outcomes in less accurate segmentation results to assist doctors in diagnosis. In this paper, we propose a multi-level semantic-rich encoding-decoding network, which consists of a Pooling-Conv-Former (PCFormer) module and a Cbam-Dilated-Transformer (CDT) module. In the PCFormer module, it is used to tackle the issue of parameter explosion in the conservative transformer and to compensate for the feature loss in the down-sampling process. In the CDT module, the Cbam attention module is adopted to highlight the feature regions by blending the intersection of attention mechanisms implicitly, and the Dilated convolution-Concat (DCC) module is designed as a parallel concatenation of multiple atrous convolution blocks to display the expanded perceptual field explicitly. In addition, MultiHead Attention-DwConv-Transformer (MDTransformer) module is utilized to evidently distinguish the target region from the background region. Extensive experiments on medical image segmentation from Glas, SIIM-ACR, ISIC and LGG demonstrated that our proposed network outperforms existing advanced methods in terms of both objective evaluation and subjective visual performance.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.333-333
• /
• 2006

We synthesized two novel polynorbornene derivatives, chiral poly(norbornene acid methyl ester) (C-PNME) and racemic poly(norbornene acid n-butyl ester) (R-PNME), which are potential low dielectric constant materials for applications in advanced microelectronic and display devices. Thin films of these polymers deposited on substrates were investigated by structural analyses using synchrotron grazing incidence X-ray scattering, specular reflectivity and ellipsometry. These analyses provided important information on the structure, electron density gradient across film thickness, chain orientation, refractive index and thermal expansion of the polymers in substrate-supported thin films. The structural characteristics and properties of the thin films were first dependent on the polymer chain' tacticity and further influenced by film thickness and thermal annealing.

• 한국해양공학회지
• /
• 제35권1호
• /
• pp.91-97
• /
• 2021

Marine accidents caused by ships have brought about economic and social losses as well as human casualties. Most of these accidents are caused by small and medium-sized ships and are due to their poor conditions and insufficient equipment compared with larger vessels. Measures are quickly needed to improve the conditions. This paper discusses a video-integrated collision prediction and fall detection system to support the safe navigation of small- and medium-sized ships. The system predicts the collision of ships and detects falls by crew members using the CCTV, displays the analyzed integrated information using automatic identification system (AIS) messages, and provides alerts for the risks identified. The design consists of an object recognition algorithm, interface module, integrated display module, collision prediction and fall detection module, and an alarm management module. For the basic research, we implemented a deep learning algorithm to recognize the ship and crew from images, and an interface module to manage messages from AIS. To verify the implemented algorithm, we conducted tests using 120 images. Object recognition performance is calculated as mAP by comparing the pre-defined object with the object recognized through the algorithms. As results, the object recognition performance of the ship and the crew were approximately 50.44 mAP and 46.76 mAP each. The interface module showed that messages from the installed AIS were accurately converted according to the international standard. Therefore, we implemented an object recognition algorithm and interface module in the designed collision prediction and fall detection system and validated their usability with testing.

• 대한교통학회지
• /
• 제27권4호
• /
• pp.137-143
• /
• 2009

고속도로에서 전방 시인이 용이하지 않은 구간에 사고차량이 존재 할 경우, 사고차량과의 충돌을 사전에 예방하기 위한 운전지원정보의 필요성이 높아지고 있다. 본 연구는 충돌방지정보 제공에 따른 운동행동에 미치는 영향을 드라이빙 시뮬레이터를 이용하여 검토하였다. 충돌방지정보를 교통상황에 따른 위험 정도에 따라 주의, 경계, 경고정보의 3단계로 나누어 검토하였고, 차량기기를 통해 제공된 정보에 대한운전자의 시인행동 및 사고차량과의 충돌회피를 위한 운전행동을 분석하였다. 또한, 제공된 정보에 대한 중요성 평가를 실시하였다. 실험 결과에 따르면, 충돌방지정보를 두 단계로 나누어 연속으로 제공할 경우에 사고발생을 낮추는 데에 효과가 있었고, 또한 두 번째 제공되는 정보는 시각정보보다는 청각 중심의 정보가 제공되어야 한다는 것을 밝혔다.

• 한국문헌정보학회지
• /
• 제44권4호
• /
• pp.395-412
• /
• 2010

본 연구에서는 국내 주요 검색 포털들인 네이버, 네이트, 다음, 야후, 파란, 구글에서 제공하는 멀티미디어 검색 서비스를 메타데이터, 검색 기능, 검색 방법, 부가 기능, 결과 출력 방식 등의 관점에서 비교, 분석하였다. 조사 결과, 모든 포털들이 이미지, 동영상 검색을 제공하는데 비해 음악 검색은 네이버, 네이트, 다음만이 제공하고 있었다. 또한 음악 검색보다는 이미지, 동영상 검색에서 검색 기능이나 부가 서비스의 개발이 보다 활발하게 진행되고 있었다. 네이버, 네이트, 다음은 국외 검색 포털들이 제공하지 않는 다양한 멀티미디어 검색 기능을 개발, 제공하고 있었고, 구글은 다양한 수준의 고급 검색 기능을 제공하고 있었다. 반면, 국내 포털들은 검색 결과에서 매우 제한적인 메타데이터만 제공하고 있었다. 본 연구의 결과는 포털들의 멀티미디어 검색 서비스의 개선에 활용될 수 있을 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.125-125
• /
• 2011

In this study, we investigated the electrical, optical, structural, and surface properties of indium zinc oxide (IZO)/Ag/IZO multilayer electrode grown by specially designed roll-to-roll sputtering system using the flexible substrate. By the continuous roll-to-roll sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, they were able to fabricate a high quality IZO/Ag/IZO multilayer electrode. At optimized conditions, the bottom IZO layer (40 nm) was deposited on a flexible substrate. After deposition of the Bottom IZO layer, Ag layer was deposited onto the bottom IZO film as a function of DC power (200~500 W). Subsequently, the top IZO layer was deposited onto the Ag layer at identical deposition conditions to the bottom IZO layer (40 nm). We investigated the characteristics of IZO/Ag/IZO multilayer electrode as a function of Ag thickness. It was found that the electrical and optical properties of IZO/Ag/IZO multilayer electrode was mainly affected thickness of the Ag layer at optimized condition. In case of IZO/Ag/IZO multilayer electrode with the Ag power (350W), it exhibited a low sheet resistance of 7.1 ohm/square and a high transparency of 86.4%. Furthermore, we fabricated the touch screen panel using the IZO/Ag/IZO multilayer electrode, which demonstrate the possibility of the IZO/Ag/IZO multilayer electrode grown by roll-to-roll sputtering system as a transparent conducting layer in the touch screen panel.

• International journal of advanced smart convergence
• /
• 제6권2호
• /
• pp.51-58
• /
• 2017

Recently, rapid advances of Ethernet and IP technology have brought many changes in the sound industry. In addition, due to AoIP-based audio transmission technology, various problems of the acoustic system (sound quality deterioration due to long distance transmission, complicated wiring) have improved dramatically. However, when many distributed audio systems are connected with AoIP equipment, if there is a problem in the equipment, it is impossible to operate the connected system. AoIP equipment only can transmit audio signals but cannot adjust the system for acoustic environment. In this paper, AoIP equipment is to be installed with sound equipment on a one-to-one basis, so that various existing problems can be solved and adjustment of sound quality (reverberation, echo, delay and EQ) can be possible by AoIP-based OAC (On-site Audio Center) with built-in DSP function. As a result, uncompressed real-time transmission by distributed transmission/receipt module in OAC (On-site Audio Center) and high quality sound by adjustment of sound quality with built-in DSP can be acquired. It is expected that OAC based sound system will be the industry standard in ubiquitous environment.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.51-63
• /
• 2010

Ink-jet is part of the non impact printing that shooting the ink drop from the nozzle to paper. It is very silence and express good color. There are two types of printing that continuous and drop on demand. But drop on demand process is becoming the mainstream. these days, LCD, PDP is passed more than semiconductor industry. And we expect organic EL, FED as a next display. But product equipment, main component and technology have a gap between an advanced country and us nevertheless physical development. Expecially, previous process part is depended on imports. Ink-jet printing technology that there isn't complicated photo lithography process is attracted, so ink-jet printing resolution is more embossed. But there were not many of ink-jet resolution thesis but ink-jet head or nozzle. Because, to out of the ink from the nozzle is unseeable and hard to experiment. Therefore this thesis was experimented and simulated how can ink-jet printer improved resolution by flow-3d simulation package program.