• Journal of Chest Surgery
• /
• v.42 no.3
• /
• pp.344-349
• /
• 2009

Background: The clinical history and physical findings of the patients with spontaneous pneumothorax depend largely on the extent of the collapse of the lung and the presence of pre-existing pulmonary disease. Large primary spontaneous pneumothorax is a possible serious condition and. so more active treatment will be necessary for these patients. The therapeutic guideline for large pneumothorax remains controversial. Therefore, by assessing the clinical results of surgical treatment for large primary pneumothorax, we aim to determine the indicators of treatment. Material and Method: Among 348 patients with primary spontaneous pneumothorax and who underwent surgical treatment from August 2004 through December 2007, 58 patients who responded to treatment for a large primary pneumothorax were included in the current study. We then retrospectively evaluated the operative findings and the surgical results. The patients with a pneumothorax of 80% or more, including those patients with tension pneumothorax, were considered to have a "large pneumothorax". Most of these patients Should be treated with a 12F chest tube. Thoracoscopic wedge resection was considered for treating recurrent pneumothorax, continuous air leakage, controlateral pneumothorax and first episode pneumothorax with visible blebs (> 1cm) seen on the computed tomography. Result: There were 50 men and 8 women with a mean age of 28.2 years (range: $14\sim54$ years). The mean length of hospitalization was 5.3 days (range: $2\sim10$ days). Nine patients underwent chest tube drainage only. Forty-nine patients underwent thoracoscopic wedge resection. The mean follow up time was 27.8 months (range: $10\sim58$ months). The actual site of air leakage could be located in 35 patients (71.4%) and this was correlated with pleural adhesion (p=0.005). The initial air leakage tended to be more correlated with intra-operative air leakage, although this was not statistically significant (p=0.066). The recurrence rate was 11.1 % for the patients with chest tube drainage and 2.0% for the patients with thoracoscopic wedge resection. Conclusion: Large primary pneumothorax requires an early diagnosis and early treatment. Thoracoscopic wedge resection may help to prevent recurrence of large primary pneumothorax.

• Development and Reproduction
• /
• v.15 no.2
• /
• pp.87-98
• /
• 2011

The present experiment was performed to evaluate the osteogenic differentiation of human adipose tissue derived mesenchymal stem cells (ATMSCs) seeded in bioceramic-poly D,L-latic-co-glycolic acid (PLGA) scaffold. Osteogenic differentiation of ATMSCs were induced using the osteogenic induction (OI) medium. ATMSCs were cultured with OI medium during 28 days in well plate. The proliferation of ATMSCs in OI medium group was significantly increased for 14 days of plate culture but slowed after 21 days. On the other hand, proliferation in the control group showed constant increase for 28 days of culturing. The alkaline phosphatase (ALP) activity of ATMSCs in OI medium group increased during the 21 days of culture but decreased on 28 days. However, in control group ALP activity of ATMSCs was continuously decreased as time goes. Nodule was observed at 21 days of culture in OI medium group and confirmed accumulation of calcium in cell by alizarin red staining. ATMSCs were seeded in PLGA scaffold or in Bioceramic-PLGA scaffold, and cultured with OI medium. ALP activity of ATMSCs by osteoblast differentiation in each scaffold increased on 21 days of culture and decreased rapidly on 28 days. ALP activity of ATMSCs was increased highly in Bioceramic-PLGA scaffold compared to PLGA scaffold on 21 days of culturing. SEM-EDS analysis demonstrated that calcium and phosphate content and Ca/P ratio in Bioceramic-PLGA scaffold increased higher than in PLGA scaffold. Biodegradability of scaffold at 56 days after implantation showed that Bioceramic-PLGA scaffold was more biodegradable than PLGA scaffold. The results demonstrated that the differentiation of ATMSCs to osteoblast were more effective in scaffold culture than well plate culture. Bioceramic increased cell adhesion rate on scaffold and ALP activity by osteoblast differentiation. Also, bioceramic was considered to increase the calcium and phosphate in scaffold when ATMSCs was mineralized by osteogenic differentiation. Bioceramic-PLGA scaffold enhanced the osteogenesis of seeded ATMSCs compared to PLGA scaffold.

• Clinical and Experimental Pediatrics
• /
• v.48 no.5
• /
• pp.539-544
• /
• 2005

Purpose : The aim of this study was to investigate the pathophysiologic role of serum E-selectin, vascular endothelial growth factor(VEGF)-induced cell adhesion mollecule in Kawasaki disease(KD) and to look for the evidence of direct relationship between the plasma levels of soluble E-selectin and the incidence of coronary artery lesion(CAL). Methods : Changes in plasma levels of sE-selectin(n=98) over time were measured by enzyme-linked immunosorbent assay(ELISA) in 23 patients with acute KD and 25 age-matched febrile children. Results : Compared with control values, the peak levels of plasma sE-selectin were significantly elevated($mean{\pm}S.E$. : $22.89{\pm}12.53ng/mL$ vs $10.65{\pm}3.42ng/mL$, P=0.01) in KD. 5 patients with CAL, plasma sE-selectin levels before treatment were higher than in 18 patients without CAL($mean{\pm}S.E$. : $39.43{\pm}15.08ng/mL$ and $19.00{\pm}8.32ng/mL$, respectively; P=0.01). Plasma sE-selectin declined rapidly in the majority of KD patients regardless of the presence of CAL. Plasma sE-selectin levels after treatment and convalesent period were similar in KD patients with and without CAL. The plasma levels sE-selectin were correlated with those of white blood cell count(r=0.299, P<0.05), CRP(r=0.430, P<0.05), serum albumin(r=-0.483, P<0.05), serum protein(r=-0.502, P<0.05) and hemoglobin(r=-0.372, P<0.05) not with those of ESR, platelet, or duration of fever. There were significant differences in the initial level of serum sE-selectin between KD with and without CAL($mean{\pm}S.E$. : $39.44{\pm}15.08ng/mL$ vs. $19.00{\pm}17.18ng/mL$) in multivariated linear tests. Conclusion : Plasma sE-selectin levels were significantly higher in KD than in other febrile illness. Higher plamsa levels of sE-selectin may have potential as a predictor of CAL in patients with KD.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.54-60
• /
• 2003

This study evaluated the influence of chemomechanical caries removal agent $Carisolv^{TM}$(MediTeam, Sweden) for composite resin adhesion to sound human permanent and primary dentin. The buccal/labial surfaces of 80 permanent molars and 80 primary incisors were used. Four types of adhesives and one composite resin were used; AQ Bond(Sun Medical, Japan), Clearfil SE Bond(Kuraray, Japan), Single Bond(3M, USA), Scotchbond Multi-Purpose(3M, USA) and Z100(3M, USA). One drop of $Carisolv^{TM}$(MediTeam, Sweden) was pretreated on the dentin for 0 second(control) and 60 seconds. The specimens were thermocycled for 1,000 times in baths kept 5 degrees C and 55 degrees C with a 30 seconds dwell time. Shear bond strengths were tested and the data was statistically analyzed using one-way ANOVA with subsequent post hoc Scheffe test at p<0.05. $Carisolv^{TM}$ treatment significantly decreased the shear bond strength. Shear bond strength of permanent dentin was significantly higher than that of primary dentin. Clearfil SE Bond treatment groups showed the highest shear bond strength and AQ Bond treatment groups showed the lowest shear bond strength.

• Journal of Embryo Transfer
• /
• v.22 no.1
• /
• pp.69-74
• /
• 2007

This study was performed to determine the estrous cycles by macroscopic observation of the ovarian changes using the laparoscopy and to make use of these results for embryo transfer in Korean black goat (Copra hircus aegagrus). Laparoscopic examinations of the ovaries were performed from 2 days after $CIDR^(R)$ removal to 22 days after ovulation. The serial morphological changes of follicles and corpus luteum (CL) were observed. CL was classified corpus hemorrhagicum(CH), corpus luteum (CL) and corpus albicans (CA) by its maturation and regression. On the day before ovulation (Day 0), Graafian follicles (GF) were found on one or both ovaries. On the day (Day 1) and $2^{nd}$day (Day 2) of ovulation, and ovulation depression (OD) and an early stage corpus hemorrhagicum $(CH_1)$ were observed at the site of GF, respectively. On Days 3 to 4, more developed and enlarged corpus hemorrhagicum $(CH_2\;and\;CH_3)$ arised from the ovulation of the GF with well vascularization. On Days 5 to 6, it was identified that mature corpus luteum $(CL_3)$ was grown on the ovary, and fully developed CL with adjacent follicles were occupied most part of the ovary on Days 17 and 18. Then the size of CL was diminished, and completely luteal regression $(CL_1\;or\;CA)$ with new large follicle was identified on Days 20 and 22. From these results, the 4 stages of the estrous cycle in Korean black goats were 1) estrus (Day 0) for 1 day, 2) metestrus $(Day\;1{\sim}4)$ for 4 days (stage of CH development), 3) diestrus $(Day\;5{\sim}16/17)$ for 12 or 13 days (luteal stage), and 4) proestrus $(Day\;17/18{\sim}20/22)$ for 4 or 5 days (stage of luteal regression and follicular growing). Laparoscopy for observation of ovarian changes was invasive than laparotomy. Additionally, it had advantages of reduced adhesion and quick operation time. It was considered that laparoscopic examination of ovarian changes will be useful for embryo transfer in the Korean black goats.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.4
• /
• pp.669-683
• /
• 2017

The objective of this study is to propose a modification of the previously proposed drainage system for catching the partial leakage of underground concrete structures. Two techniques were proposed for applying the drainage system only to the leaking parts. One was for conveying leaking groundwater to the collection point in the drainage system and the other was for conveying the collected groundwater to the primary drainage system of the underground concrete structure. Four waterproofing materials for conveying leaking groundwater to the catchment point of the drainage system, Durkflex made of porous rubber material, KE-45 silicone adhesive with super strong adhesion, Hotty-gel made of polymeric materials and general silicone adhesive were evaluated for waterproofing performance. Hotty-gel only showed perfect waterproof performance and the other three waterproof materials leaked. The modified drainage system with Hotty-gel and drainage pipe with fixed saddle to convey the leaking groundwater from the catchment point to the primary drainage system were tested on the concrete retaining wall. The waterproof performance and the drainage performance were evaluated by injecting 1,000 ml of water in the back of the modified drainage system at the 7-day, 14-day, 21-day, 28-day, 2-month and 3-month. There was no problem in waterproof performance and drainage performance of the modified drainage system during 3 months. In order to evaluate the construction period and construction cost of the modified drainage system, it was compared with the existing leaching repair method in surface cleaning stage, leakage treatment stage, and protective barrier stage. Total construction period and construction cost were compared in considering the contents of work, repair material, construction equipment, working time, and total number of workers. As a result of comparing and analyzing in each construction stage, it was concluded that the modified drainage system could save construction period and construction cost compared to the existing leaching repair method.

• Korean Journal of Agricultural Science
• /
• v.12 no.1
• /
• pp.75-85
• /
• 1985

This study is intended to find out the influence of Lignosulfonic Acid Type Admixture on compressive, tensile, flexural strength and dispersing action of mortar, and fixation of by-product of pulp industry. 1. The more Pozzolith-84 is added, the larger flow value is. The admixture of lignosulfonic acid type adhere to cement particles and the surface potential of particles is generated. On account of the repulsion among the cement particles, they are dispersed and the mortar get workable, so the production cost of precast product is curtailed and the amount of cement is reduced in a certain workability of mortar. 2. The strength of mortar is greater than plain mortar when P/C added is 0.2 and 0.4%. As time passed the potential energy is reduced and the distance of particles which lignosulfonic acid adhered to get near according as the amount of adhesion is increased. The setting and hardening reaction of morter is occurred in close state, so the strength of mortar is increased a little. The strength of mortar is less than plain mortar when amount P/C added is 0.8%. Pozzolith-84 is mainly composed of lignosulfonic acid and lignin does not influence the hardening of mortar, therefore the remained $SO_3$, $SO_3H$ are the reason of decrease of strength. 3. There is high significance between specific gravity and compressive strength. The larger specific gravity is, the more compressive strength is increased. There is high significance between 7 day's strength and 28 day's strength. The larger compressive strength is, the more tensile and flexural strength are increased. 4. Since Pozzolith-84 is a by-product of pulp industry, by using the Pozzolith-84 admixture the concreate quality is improved. The water pollusion is reduced according to fix by-products in concrete structure.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.5
• /
• pp.557-567
• /
• 2001

Background : Tumor angiogenesis is required for tumor growth and metastasis. In this study, we investigated the correlation between the intensity of angiogenesis and stage, nodal status, histologic type, metastasis and survival rate of non-small cell lung cancer. Method : Formalin fixed, paraffin embedded surgical specimens of 45 patients who had surgically resected primary non-small cell lung cancers without pre or post operative adjuvant chemotherapy or radiotherapy were examined. The microvessel count(MVC) was demonstrated by immunohistochemical staining for CD31(platelet endothelial cell adhesion molecule, PECAM). Results : Microvessel counts(MVCs) in stage IIIA and IIIB were higher than in stage I and II(p<0.05). The MVC in patients with lymph node metastasis was higher than that in patients without lymph node metastasis, although the difference was not statistically significant(p>0.05). However, in adenocarcinoma, the MVC in patients with lymph node metastasis was significantly higher than that seen in patients without lymph node metastasis(p<0.05). The MVC in adenocarcinoma was higher than that in squamous cell carcinoma(p<0.05). The difference between the MVCs of adenocarcinoma and squamous cell carcinoma was not statistically significant in stage I and II or N0 stage(p>0.05). However, in stage IIIA and IIIB or N1~3 stage, the MVC in adenocarcinoma was higher than that in squamous cell carcinoma(p<0.05). MVC was more increased when metastasis developed within 12 months. In the same histologic type and stage, the duration of survival time in patients with high MVC was shorter than in patients with low MVC, however the difference was not statistically significant(p>0.05). The survival rate in patients with high MVCs was lower than that in patients with low MVCs(P<0.05). Conclusion : In non-small cell lung cancer, MVC correlated relatively well with pathologic stage, nodal status(limited in patients with adenocarcinoma), histologic type, postoperative metastasis and survival rate. However, in the same histologic type and stage, MVC was not significantly related to the duration of survival. Therefore the assessment of the intensity of angiogenesis in non-small cell lung cancer may be helpful in predicting prognosis and in selecting patients for systemic adjuvant therapy of potential metastasis according to the results.

• Sijohaknonchong
• /
• v.44
• /
• pp.7-28
• /
• 2016

Music was made popular through the modern mass media. Nonetheless, if a period of high standard performances and appreciation by a minority of culture connoisseurs can be qualified with the expression "gentrification of culture", then a period when anyone can access culture through the mass media can be qualified with the terms "popularization of culture" and in this period the reorganization of performance culture can only be driven by the public. In fact, the Jabga, which is a type of traditional song that received strong public adhesion by means of phonograph records and radio broadcasts at the time, stands as a typical example to it. Gagok and Sijo up until the 1920s and even the 1930s are believed to engage actively in the changing media environment and the new modes of music enjoyment and transmission. The Album recording of faster rhythm music and the inclusion of the Sijo, Jabga, and folk songs in one broadcast programme can be seen as reflecting such an effort. However, it can only be hard for the Sijo and Gagok to challenge the predominance of the Jabga which made its lyrics more popular and the new songs written in accordance with the new media environment. Until the 1930s in this changing environment of music enjoyment, Gagok and Sijo performers rather sought to distinguish themselves from the existing popular song style by reproducing traditional forms. The album recording and broadcasting of Lee Wangjik Aakbu, the beginnings of local singers, the participation of male performers not only contributed to the diversification the enjoyment culture of songs and sijo, but also made the 'difference in standard' with the popular songs even more salient.