• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.553-556
• /
• 2011

The primary aim of the present study is to propose new design formulae that can be used to evaluate the structural performance of breakwaters installed on container carriers under green water impact loads. A series of numerical analyses for green water impact loads inducing breakwater collapse have been carried out. The well-known fluid-structure interaction analysis technique has been adopted realistically to consider the phenomenon of green water impact loads. The structural behavior of these breakwaters under green water impact loads has also been carried out simultaneously throughout the transient analysis. A verification study of the numerical results was performed using the actual collapse incidents of breakwaters on container carriers. It would be expected that the proposed design formulae, based on the obtained insights, could be used as practical guidelines for the design of breakwaters on container carriers.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.129-138
• /
• 2010

This paper qualitatively and quantitatively examines the effectiveness of regulations currently in place in the Korean mobile telecommunications market by comparing their intended objectives with the actual outcome, particularly with respect to the performance of market participants. The results show that the regulations have generally been effective in lowering the average revenue per user of carriers. However, the managed competition efforts of the government have also resulted in increased revenues for the top two carriers in the market without significantly affecting their general business operations.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.333-343
• /
• 2006

In this paper, the baseline-length information is directly modeled as a measurement for the Wald test, which speeds up the resolution convergence of the integer ambiguity of GPS carrier phase measurements. The convergent speed improvement is demonstrated using numerical simulation and real experiments. It is also shown that the integer ambiguities can be resolved using only four actual satellite measurements with very reasonable convergence speed, if the baseline-length information is used just like one additional observable satellite measurement. Finally, it is shown that the improvement of convergence speed of the Wald test is due to the increase of the probability ratio with the use of the baseline-length constraint.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.100-106
• /
• 2010

The impact of surface quantization on device parameters of a Si metal oxide semiconductor (MOS) capacitor has been analyzed in the present work. Variation of conduction band bending, position of discrete energy states, variation of surface potential, and the variation of inversion carrier concentration at charge centroid have been analyzed for different gate voltages, substrate doping concentrations and oxide thicknesses. Oxide thickness calculated from the experimental C-V data of a MOS capacitor is different from the actual oxide thickness, since such data include the effect of surface quantization. A correction factor has been developed considering the effect of charge centroid in presence of surface quantization at strong inversion and it has been observed that the correction due to surface quantization is crucial for highly doped substrate with thinner gate oxide.

• Transactions of the Society of Information Storage Systems
• /
• v.9 no.2
• /
• pp.56-61
• /
• 2013

The recent increased use of mobile phone has resulted in a technical focusing on reliability issues related to drop performance. Since mobile phone may be dropped several times during their use, it is required to survive common drop accidents. The plastic injection parts such as base stopper and carrier in the encoder type actuator can be broken easily in the actual reliability test of 1.5m free drop. So, we analyzed the shock resistance characteristics of auto focus actuator with variables in the material properties using finite element method. By applying the new resin materials, we can decrease the breakage of plastic injection parts and improve the reliability of mobile phone.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.31-66
• /
• 2008

Until Montreal Convention was established in 1999, the Warsaw System is undoubtedly accepted private international air law treaty and has played major role on the carrier's liability in international aviation transport industry. But the whole Warsaw System, though it was revised many times to meet the rapid developments of the aviation transport industry, is so complicated, tangled and outdated. This thesis, therefore, aim to introduce the Montreal Convention by interpreting it as a new legal instrument on the air carrier's liability, specially on the passenger's, and analyzing all the issues relating to it. The Montreal Convention markedly changed the rules governing international carriage by air. The Montreal Convention has modernized and consolidated the old Warsaw System of international instruments of private international air law into one legal instrument. One of the most significant features of the Montreal Convention is that it sifted its priority to the protection of the interest of the consumers from the protection of the carrier which originally the Warsaw Convention intended to protect the fledgling international air transport business. Two major features of the Montreal Convention adopts are the Two-tier Liability System and the Fifth Jurisdiction. In case of death or bodily injury to passengers, the Montreal Convention introduces a two-tier liability system. The first tier includes strict liability up to 100,000SDR, irrespective of carriers' fault. The second tier is based on presumption of fault of carrier and has no limit of liability. Regarding Jurisdiction, the Montreal Convention expands upon the four jurisdiction in which the carrier could be sued by adding a fifth jurisdiction, i.e., a passenger can bring suit in a country in which he or she has their permanent and principal residence and in which the carrier provides a services for the carriage of passengers by either its own aircraft or through a commercial agreement. Other features are introducing the advance payment, electronic ticketing, compulsory insurance and regulation on the contracting and actual carrier etc. As we see some major features of the Montreal Convention, the Convention heralds the single biggest change in the international aviation liability and there can be no doubt it will prevail the international aviation transport world in the future. Our government signed this Convention on 20th Sep. 2007 and it came into effect on 29th Dec. 2007 domestically. Thus, it was recognized that domestic carriers can adequately and independently manage the change of risks of liability. I, therefore, would like to suggest our country's aviation industry including newly-born low cost carrier prepare some countermeasures domestically that are necessary to the enforcement of the Convention.

• Journal of the Korean Institute of Gas
• /
• v.22 no.3
• /
• pp.20-31
• /
• 2018

There was an amazing growth in the korean shipbuilding industry considering the industrial magnitude and the technical level. On the contrary of the growth, there are a number of accidents in the shipbuilding yard. According to the statistic data of the industrial accident in the last 7 years, the number of accidental fatalities in shipbuilding industries are 1.48 ‱ which are over more than doubles of the average in the Korean industries, 0.66 ‱. Thus, through an accident investigation of fire and explosion case during painting work in the tank of the crude oil carrier, it have been tried to diagnose actual conditions in the shipbuilding yards.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.4
• /
• pp.181-194
• /
• 2017

In recent years, research has been actively conducted on the navigation in an indoor environment where Global Navigation Satellite System signals are unavailable. Among them, a study performed indoor navigation by integrating pseudolite carrier and Inertial Measurement Unit (IMU) sensor. However, in this case, there was no solution for the cycle slip occurring in the carrier. In another study, cycle slip detection and compensation were performed by integrating Global Positioning System (GPS) and IMU in an outdoor environment. However, in an indoor environment, cycle slip occurs more easily and frequently, and thus the occurrence of half cycle slip also increases. Accordingly, cycle slip detection based on 1 cycle unit has limitations. Therefore, in the present study, the aforementioned problems were resolved by performing indoor navigation through the integration of pseudolite and ultra-low-cost IMU embedded in a smartphone and by performing half cycle slip detection and compensation based on this. In addition, it was verified through the actual implementation of real-time navigation.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.50-55
• /
• 2015

Application of newly conceptualized Anti-Splash Devices designed for COT vent pipes were studied on a P/V valve located on the upper deck of an oil carrier vessel. Anti-Splash devices are used in the shipbuilding industry in order to avoid oil overflow and spray accidents caused by excess pressure and vacuum condition in the cargo oil tanks. These conditions are caused by the transverse and longitudinal sloshing forces that arise from ship motion during sea voyages. The main issue with existing Anti-Splash device model is flux at the outlet of the Anti-Splash Device, and so, new conceptual models for the Anti-Splash device were developed and compared to existing Anti-Splash device model using CFD analysis. Transient analysis was used to capture the flow and velocity of each model and a comparative analysis was performed between old and new-concept models. This data was used to determine the optimal design parameters in order to develop an optimized Anti-Splash Device. A Factory acceptance test was performed on the new-concept models in order to verify the performance and efficiency against their design requirements and other criterion. The final step performed was to apply the optimized Anti-Splash Device models for COT vent pipes to an actual vessel and verify performance through a seawater cargo operation during a sea voyage as per the ship owner's request. The patent for the aforementioned device was obtained by the Korean Intellectual property Office dated Dec. 18th,2014.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.1-10
• /
• 1997

Viscous flow around actual ship is calculated by an use of RANS equations. The propriety of this computing method, usefulness to hull form design and the scale effect which is the effect of viscous flow depending on the scale of ship model are investigated. Reynolds stress is modelled by using k-${\varepsilon}$ turbulence model and the law of wall is applied near the body. Body fitted coordinates are introduced for the treatment of the arbitrary 3-dimensional shape of the ship hull form. The transformed equations in the computational domain are numerically solved by an employment of FVM. In the calculation of pressure, SIMPLE method is adopted and the solution of the discretized equation is obtained by the line-by-line method with the use of TDMA The calculations of two ships, 4410 TEU container carrier and 50,000 DWT class bulk carrier, are performed at model and actual ship scale. The results are compared and discussed with the model test results which are viscous resistance, nominal wake distribution at propeller plane and limiting streamline on the hull surface. They describe the effect of stem form and the scale effect very well. In particular, the calculated nominal wake distribution and limiting streamline are agreed qualitatively with the experiments and the viscous resistance values are estimated within ${\pm}5%$ difference from the resistance tests.