• Title/Summary/Keyword: Acquisition Process Improvement

Search Result 112, Processing Time 0.032 seconds

Development and Analysis of Effect for Problem Solving Model of Student-based (학생중심의 문제해결 모형 개발 및 효과 분석)

  • Jung, Chan Sik;Roh, Eun Hwan
    • Education of Primary School Mathematics
    • /
    • v.17 no.1
    • /
    • pp.57-75
    • /
    • 2014
  • Problem Solving has been emphasized for recent decades, and many research case studies have been used to improve students' Problem Solving abilities. However, the gap of students' abilities can be easily shown after enrollment into school in spite of scholar's attempt to reduce students' level of differentiation. Besides, it is clear that teachers have been too readily assisting students' and not allowing them to acquire the process of Problem Solving, and this may be due to impatience. Therefore, students seem to show signs of the dependent tendency towards teachers and other materials. This tendency easily allows students' to depend on teaching resources without attempting any developmental mechanism of Problem Solving. The presupposition of this study is that every student must solve a problem without any assistance, and also this study is to provide new cognitive strategies for both teachers and students who want to solve their problems by themselves through the process of visible Problem Solving. After applying the student-based problem-solving model by this study, it was found to be effective. Therefore this will lead to the improvement of the Problem Solving and knowledge acquisition of students.

지적재산의 취득과 실시에 관한 경쟁정책 : 기술혁신 시장 이론

  • 권용수
    • Proceedings of the Technology Innovation Conference
    • /
    • 1996.12a
    • /
    • pp.196-238
    • /
    • 1996
  • Because global innovation-based competition is increasing and the amount of R&D expenditures becomes severely large, it is more likely that mergers and collaborative ventures tend to affect adversely to R&D competition Against this trend, enforcing agency of advanced countries including U.S.A are reassessing certain aspects of competition policy toward mergers and acquisition to ensure that procompetitive, efficiency-enhancing transactions are permitted. The role of competition policy is developing and appropriating new technology and protects the risks involved in the licensing contract of technologies. The role of intellectual property rights is also contrived to promote technological innovation and to increase consumer welfare. That is to say, dynamic efficiency of intellectual property rights includes (l) increase in social welfare and (2) promotion of growth by improvement of quality through invention and commercialization of new product as well as enhanced productive efficiency thorough appropriating new process. Because intellectual property rights are licensed to make use of complementary inputs, the rule of reason approach seems proper when applying antitrust law. To analyze the "Antitrust Guidelines for the Licensing and Acquisition of Intellectual Property"by DOJ and FTC in U.S.A, the author surveyed pros and cons on innovation market approach. This approach will only be used in a narrow range of situations when the evidence is solid, concentration numbers are extremely high, and the agencies can predict with a high degree of certainty that the merger will likely lead either to a slowing in the pace of innovation or the loss of an alternative research track that is likely to lead to a product beneficial to consumers. The author introduces the studies on licensing contract of intellectual property rights and competition polices on behalf of potential inquirers. Also the author invites the interdisciplinary researchers to analyze further with a model on the aspects of the "Notice 1995-10 for Types and Criteria on Unfair Transaction Behavior in International Contracts" by Fair Trade Committee of Korea.

  • PDF

Effects of Interaction using Wiki on Productive Vocabulary Knowledge (위키를 활용한 상호작용이 산출적 어휘 지식에 미치는 영향)

  • Jang, Yong-Seon
    • The Journal of the Korea Contents Association
    • /
    • v.14 no.5
    • /
    • pp.487-497
    • /
    • 2014
  • The purpose of this study is to investigate the efficacy of interaction using Wiki in communication-oriented classes taught by native teachers on the incidental improvement of productive vocabulary knowledge. Eighty two university freshmen participated in the study and they were divided into two groups. Thirty eight students(Process Group) received process feedback from the teacher while forty four students(Result Group) received result feedback. They were given a short movie project working in a group of four or five people to practice interaction between peers and between students and the teacher. Data were collected from one receptive and three productive vocabulary knowledge test scores. The results showed that interaction using Wiki was conducive to the growth of productive vocabulary knowledge incidentally due to continuous opportunities to use vocabulary. The students of process feedback group made greater gains of productive vocabulary than those of result feedback group. Based on these results, pedagogical implications are discussed.

Study on the Innovation Process of the Satellite Industry (인공위성 산업의 기술혁신 과정에 관한 연구)

  • Seol, Myung Hwan;Choi, Jong-In
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.9 no.6
    • /
    • pp.117-128
    • /
    • 2014
  • This is the case study of SATREC INITIATIVE company which is the unique domestic production of commercial satellites. We examined the path and pattern for accumulation of technological capability and technology learning process. This case study show that the process of technological innovation and their influencing factors. First, the technological learning of the satellite industry follows the stage of technological acquisition, absorption, improvement and is embodied by the technological capability. Second, accumulated technological capability of the satellite industry influences the technology innovation. Third, the top management team(TMT) affects the technological learning and technological capability. Fourth, TMT has a moderating role between the technological capability and the performance of technological innovation. Finally, technological innovations in the small and venture business would be the source of technological capability and technological learning. The implications of this study are as follows. TMT has the very important role for the technological innovation and affect the technology development and the production. Also technology-based companies must gain a competitiveness advantage through technological learning and technological innovations for sustainable growth.

  • PDF

A Study on Mixed Noise Removal using Pixel Direction Factors and Weighted Value Mask (화소의 방향요소 및 가중치 마스크를 이용한 복합잡음 제거에 관한 연구)

  • Kwon, Se-Ik;Kim, Nam-Ho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.19 no.11
    • /
    • pp.2717-2723
    • /
    • 2015
  • Recently, digital image processing is being applied in various areas of broadcasting, communication, computer graphic and medical science. But, degradation of images occurs in the process of digital image acquisition, processing and transmission. Therefore, in order to remove the mixed noise, this paper suggested the image restoration algorithm to process salt and pepper noise with weighted filters according to 4 direction pixel changes after judging the noise and to process AWGN with weighted filters which have individually different characteristics. Regarding the processed results by applying Boat images which were corrupted by salt and pepper noise(P=40%), suggested algorithm showed the improvement by 1.33[dB], 1.41[dB], 0.51[dB] respectively compared with the existing CWMF, AWMF, MMF.

Digital Fine Timing Tracker for Correlation Detection Receiver in IR-UWB Communication System (IR-UWB 시스템에서 상관 검출 수신기를 위한 디지털 미세 타이밍 추적기)

  • Ko Seok-Jun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.9C
    • /
    • pp.905-913
    • /
    • 2006
  • In the impulse radio ultra-wideband communication systems, the residual timing offset exists when the acquisition and tracking of the timing synchronization is well done. And the offset affects the performance of the system dramatically. In order to compensate the offset, we present the digital phase-locked loop that uses the reference signal in the correlation detection receiver. First, we show the degradation of BER performance that is caused by the offset, and then compensation process of the timing tracker and performance improvement. In this paper, the timing detector in the tracker operates at the sampling period of frame level uses the correlation between received and reference signal. Also, we present the performance comparison by using the computer simulation results for different Gaussian monocycle pulses.

Research Priorities in Light of Current Trends in Microsurgical Training: Revalidation, Simulation, Cross-Training, and Standardisation

  • Nicholas, Rebecca Spenser;Madada-Nyakauru, Rudo N.;Irri, Renu Anita;Myers, Simon Richard;Ghanem, Ali Mahmoud
    • Archives of Plastic Surgery
    • /
    • v.41 no.3
    • /
    • pp.218-224
    • /
    • 2014
  • Plastic surgery training worldwide has seen a thorough restructuring over the past decade, with the introduction of formal training curricula and work-based assessment tools. Part of this process has been the introduction of revalidation and a greater use of simulation in training delivery. Simulation is an increasingly important tool for educators because it provides a way to reduce risks to both trainees and patients, whilst facilitating improved technical proficiency. Current microsurgery training interventions are often predicated on theories of skill acquisition and development that follow a 'practice makes perfect' model. Given the changing landscape of surgical training and advances in educational theories related to skill development, research is needed to assess the potential benefits of alternative models, particularly cross-training, a model now widely used in non-medical areas with significant benefits. Furthermore, with the proliferation of microsurgery training interventions and therefore diversity in length, cost, content and models used, appropriate standardisation will be an important factor to ensure that courses deliver consistent and effective training that achieves appropriate levels of competency. Key research requirements should be gathered and used in directing further research in these areas to achieve on-going improvement of microsurgery training.

Intelligent Methods to Extract Knowledge from Process Data in the Industrial Applications

  • Woo, Young-Kwang;Bae, Hyeon;Kim, Sung-Shin;Woo, Kwang-Bang
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • v.3 no.2
    • /
    • pp.194-199
    • /
    • 2003
  • Data are an expression of the language or numerical values that show some features. And the information is extracted from data for the specific purposes. The knowledge is utilized as information to construct rules that recognize patterns or make a decision. Today, knowledge extraction and application of that are broadly accomplished for the easy comprehension and the performance improvement of systems in the several industrial fields. The knowledge extraction can be achieved by some steps that include the knowledge acquisition, expression, and implementation. Such extracted knowledge is drawn by rules with data mining techniques. Clustering (CL), input space partition (ISP), neuro-fuzzy (NF), neural network (NN), extension matrix (EM), etc. are employed for the knowledge expression based upon rules. In this paper, the various approaches of the knowledge extraction are surveyed and categorized by methodologies and applied industrial fields. Also, the trend and examples of each approaches are shown in the tables and graphes using the categories such as CL, ISP, NF, NN, EM, and so on.

A Study on Image Restoration using Mean and Wiener Filter (평균 및 위너 필터를 사용한 영상 복원에 관한 연구)

  • Moon Hong-Deuk;Kang Kyeong-Deog;Bae Sang-Bum;Kim Nam-Ho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.8 no.7
    • /
    • pp.1393-1398
    • /
    • 2004
  • Image is degraded by several causes such as the process of acquisition, storage and transmission. To restore those images, many researches have been continued. Centrally methods to restore degraded image by AWGN(additive white gaussian noise) a.e mean filter and wiener filter. Especially, mean filter is superior in noise reduction of area that is a small change of luminosity. But mean filter brings about the effect smoothing edge components of the image, because it does'nt consider characteristics of the image. So in this paper we propose an image restoration method compounding respective images adding established weights, after filtering with mean filter and powerful wiener filter in both improvement of contrast and preservation of edge components.

A Study on Improvement Method of Interoperability Test & Evaluation Approach for the C4I Systems in NCW Environment (NCW환경에서 지휘통제체계(C4I) 상호운용성 시험평가체계 개선방안 연구)

  • Kim, Kyung-Hee;Kang, Seok-Joong
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.15 no.6
    • /
    • pp.786-801
    • /
    • 2012
  • The most essential ROC(requirement operational capability) in order to assure the effectiveness of the C4I Systems in NCW Environments is the seamless and stable interoperability between systems. The U.S. Armed Forces that perceived the importance of interoperability, prepared the framework to apply from the proposal of requirement to every step of acquisition process. The Korea Joint Chiefs of Staff is also developing a similar system in order to assure the interoperability between command control(C4I) systems. In the paper, we specify the needs of standardization of test systems and international trends on the technology, and propose an interoperability test & evaluation system based on a standardization conformity method to improve the interoperability test & evaluation for the C4I systems in NCW environments. Finally we show an example of the implementation of the test system and its application to C4I systems to verify the proposed test system.