• 한국추진공학회지
• /
• 제19권4호
• /
• pp.15-23
• /
• 2015

본 연구는 유한요소해석 기반의 Helmholtz solver인 ASCI3D를 사용하여 예혼합 가스터빈 연소기에서 연소불안정 현상과 관련된 주요 결과들을 예측하였다. 해석결과는 실험결과와 비교할 때 일반적인 불안정 특성 예측에는 성공하였으나, 불안정 구간이 나타나는 영역을 다소 과대 예측하는 경향이 발견되었다. 이를 개선하기 위한 노력으로 반사계수가 불안정 특성에 미치는 영향이 분석되었다. 결과로부터 반사계수는 불안정 특성에 큰 영향을 미치고, 정확한 예측 결과를 얻기 위해서는 정확한 음향 경계 조건의 정의가 필수적인 것으로 나타났다.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.331-339
• /
• 2016

To improve the acoustic performance of sound absorbing materials, the thickness of the material should be increased or the sound absorbing material having an irregular surface shape should be used. In this study, the acoustic characteristics and methods to improve the acoustic performance of a sound absorbing system equipped with double layered polyester sound absorbing materials were investigated. The numerical model was set up and the results obtained from the model were compared with the actual measurement data. And, strategies to improve the acoustic performance of sound absorbing systems with double layered sound absorbing materials made of polyester with different configuration were shown. So, this study is expected to be usefully used at sites that require high acoustic absorption performance with minimal installation thickness to reduce sounds reflection in narrow spaces such as interior of subway tunnels or in noise barriers installed adjacent to rails.

• 비파괴검사학회지
• /
• 제34권2호
• /
• pp.119-127
• /
• 2014

An epoxy coating applied to the concrete surface of a containment building deteriorates in hazardous environments such as those containing radiation, heat, and moisture. Unlike metals, the epoxy coating on a concrete liner absorbs and discharges moisture during the degradations process, so it has a different density and volume during service. In this study, acoustic impedance was adopted for characterizing the degradation of a glass-reinforced epoxy coating using the acoustic reflection coefficient (reflectance) on a rough epoxy coating. For estimating the acoustic reflectance on a wavy epoxy coating surface, a probabilistic model was developed to represent the multiple irregular reflections of the acoustic wave from the wavy surface on the basis of the simulated annealing technique. A number of epoxy-coated concrete specimens were prepared and exposed to accelerated aging conditions to induce an artificial aging degradation in them. The acoustic impedance of the degraded epoxy coating was estimated successfully by minimizing the error between a waveform calculated from the mathematical model and a waveform measured from the surface of the rough coating.

• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.54-62
• /
• 2013

본 연구는 비접촉 무전원 표면탄성파(surface acoustic wave, SAW) 온도센서를 개발하기 위하여 수행되었다. 단일전극 구조의 IDT(inter-digital transducer)와 434 MHz의 공진주파수를 가지는 SAW 소자를 $128^{\circ}$ rot-X $LiNbO_3$ 압전기판위에 반도체 공정으로 제작하였다. SAW 온도센서의 음향 반사판에 따른 반사 신호의 특성을 분석하기 위하여 다양한 형태의 음향 반사판을 제작하여 표면탄성파 신호의 반사특성을 분석한 결과 빗살형 전극형태의 반사판이 가장 양호한 반사특성을 나타내었다. SAW 온도센서를 구동하기 위한 신호를 송신하고 온도에 따른 SAW 센서의 출력신호를 수신하기 위하여 다이폴 안테나와 마이크로프로세서에 기반한 무선 송수신 시스템을 제작하였다. $40{\sim}80^{\circ}C$의 온도 범위에서 개발된 SAW 온도센서와 무선 송수신 시스템을 평가한 결과 온도증가에 따라 SAW 온도센서의 공진 주파수가 선형적으로 감소하였으며 결정계수가 0.99 이상으로 정확한 무선 온도측정이 가능한 것으로 나타났다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.1021-1026
• /
• 1994

This paper proposes a filter structure suitable for speech synthesis applications. We first derive the lossy pole-zero model by employing the wave digital filter(WDF) adaptor formula, and by converting the fixed termination value - 1 into a loss factor $\mu$c$\in$(-1, 1). Then we discuss how to determine the reflection We employ the Durbin's method in estimating the numerator polynomial of the lossy pole-zero transfer function from the given speech sound, and then apply the step-down algorithm on the numerator to extract the reflection coefficients of the closed-termination tract. For determining the reflection coefficients of the other parts we employ a pre-calculated pole-estimator polynomial.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.445-446
• /
• 2013

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.148-152
• /
• 2007

In recent days, on account of the cultural development and the improvement of citizen's consciousness level, it is the real situation that the construction of small-scaled Multi-Purpose Hall where various cultural events could be performed, is on increasing. However, since the most of Multi-Purpose Hall had been designed and built up without any consideration on Acoustic Factor, many problems are on occurring thereat. Since those small-scaled Multi-Purpose Hall have been mostly used with the finishing material which contains a high degree of Acoustic Absorption indiscreetly, both diffusion and reflection of sound are not establishing properly, and because thereverberation of sound is very low, in case of musical performance by musical instrument, its sound hears too arid and stiff, there occurs some acoustic defect such as it becomes difficult for music appreciation with sufficient timbre, so that the capability improvement on the matter is urgently requiring situation. Therefore, this Study has tried to seize the satisfaction level about the small-scaled Multi-Purpose Hall after betterment of the acoustic performance by appraise the acoustic condition of the Hall, using Auralization Technique that can experience Virtual Acoustic Field regarding to the small-scaled Multi-Purpose Hall as its object. It is deemed that such research result could be practically used as the useful material which enables to bring a reduction effect of construction cost as well asenhancement of the acoustic performance through its presupposition?control on the acoustic problem when construction or renovation of other similar small-scaled Multi-Purpose Hall in the future.

• 한국소음진동공학회논문집
• /
• 제24권5호
• /
• pp.399-406
• /
• 2014

Underwater acoustic materials are installed in order to reduce reflection, transmission and radiation of an underwater structure. The acoustic performance of the materials should be evaluated in accurately-controlled environment in terms of temperature and static pressure. In this paper, two pulse tubes, which are equipped with temperature and pressure controllers, are designed and developed to evaluate echo reduction(ER) and transmission loss(TL) of underwater acoustic materials. The procedures of the evaluation are suggested and the validation is carried out by comparing theoretical values to experimental results for a simple stainless steel specimen and free surface. In result, it is validated that developed pulse tubes are able to measure ER and TL with 2 dB tolerance.

• 한국수산과학회지
• /
• 제23권6호
• /
• pp.451-456
• /
• 1990

Underwater acoustic navigation and position fixing systems have been extensively used not only in surface position fixing but also in underwater position fixing. Tn recently, application of these systems has been in the field of underwater inspection of offshore platforms, where it is vital to track the position of an unmanned submersible or diver carrying underwater cameras and nondestructive testing equipment. But these systems are included the fixing errors as results of a signal with additive noise, the attenuation of sound and the interference effects due to multipath reflection and forward scattering. In this paper to improve the position fixing by the supershort baseline acoustic position system, a method to apply the Kalman filter to the fix of the system is proposed and the digital simulation under noise condition is conducted. The optimal positions by the Kalman filter are compared with original positions, and it is confirmed that the results of the pro-posed method are evidently more accurate.

• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.78-83
• /
• 2016

In underwater acoustic communication, the transmitted signals are severely influenced by the reflections from both the sea surface and the sea bottom. As very large reflection signals from these boundaries cause an inter-symbol interference (ISI) effect, the communication quality worsens. A channel estimation-based equalizer is usually adopted to compensate for the reflected signals under the acoustic communication channel. In this study, a feed-forward equalizer (FFE) with the least mean squares (LMS) algorithm was applied to a quadrature phase-shift keying (QPSK) transmission system. Two different types of equalizers were adopted in the QPSK system, namely a real-coefficient equalizer and a complex-coefficient equalizer. The performance of the complex-coefficient equalizer was better than that of two real-coefficient equalizers. Therefore, a Hilbert transform was applied to the real-coefficient binary phase-shift keying (BPSK) system to obtain a complex-coefficient BPSK system. Consequently, we obtained better results than those of a real-coefficient equalizer.