• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.79-85
• /
• 2023

Recently, in the semiconductor process, large companies are seeking process changes from memory semiconductors to the foundry due to the increase in demand due to the 4th industry. industry is expanding. The characteristics of special gases and precursors, which are raw materials used to produce these semiconductor chips, are toxic, pyrophoric, inflammable, and corrosive. These semiconductor raw materials are operated in a closed system and do not leak to the outside during normal times, but when leaked, they spread to the inside of the gas box, and when proper ventilation is not provided inside the gas box, they spread to the outside, causing fires, explosions, or toxic substances. It can lead to major accidents such as leakage. Recently, there have been cases of accidents in which hazardous materials leaked from the closed system of the semi conductor process and spread to the inside and outside of the gas box. . In this study, we propose preventive measures based on the case of an accident in which raw material leaked from the VCR fitting, which is the connection part of the semiconductor raw material transfer pipe, and spread to the outside of the gas box.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.18-25
• /
• 2017

Each country tries to prevent major industrial accidents at industrial sites, such as fire and explosion as well as poisoning incidents, and regulation of the management of chemicals is being enhanced in all sectors. In particular, in the case of laboratories, a variety of chemicals have been developed and handled in accordance with the development of science and technology. On the other hand, the accident probability at laboratories is higher than at industrial sites, because many different kinds of chemicals are handled in the laboratory but in very small amounts and chemical, physical, and biological studies have been carried out in limited spaces. Recently, the accident probability at laboratories was found to be higher as convergence/integration studies were carried out beyond the academic arena. Therefore, in this study, a survey of chemical management was conducted to prevent accidents due to chemicals targeting the laboratory safety coordinator using the FGI (focus group interview) method. The building plan of a chemical management system was suggested based on the results of the survey.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.118-129
• /
• 2018

This study analyzed the recent serious disaster cases of chemical extinguishing agent poisoning and suffocation investigated by KOSHA and proposed the safe use of chemical substances, including the chemical extinguishing agent. An analysis of the statistical figures an increase in the number and variations of chemical poisoning and suffocation cases in industry between 2011~2016 increased. Unlike other physical accidents, chemical accidents are very high in severity and it is difficult to identify the chemical hazard and risk. To prevent chemical disasters, it is essential to develop and use an easy chemical risk assessment tool. For the safe use of chemical substances, in which it is difficult to carry out hazard identification and risk assessments, this thesis presents the useful chemical recognition and risk assessment tools, CHEM-i and CHARM developed by KOSHA.

• Journal of Technologic Dentistry
• /
• v.32 no.3
• /
• pp.221-232
• /
• 2010

Purpose: It is necessary for dental technicians exposed to hazardous chemicals in the dental laboratories to be informed of the various harmful effects of chemicals for their health and safety. The purposes of this study was to investigate the actual condition of the use of MSDS in dental laboratories and the recognition rate of MSDS for dental technicians. Methods: 231 dental technicians who were self-written questionnaire. The results were analyzed by SPSS 12.0. The answers to the questionnaire underwent frequency analysis, chi-square test and correlation analysis were performed to investigate association between health effects and recognition rate of chemical information. Results: The results from the effects of damage caused by chemicals 60.7%, and when it was less than 2 years working experience 47.6%. Currently any dental laboratories(rooms) was not furnished MSDS(0%) and even similar data furnishing rate was only 17.3%. Answer rate of 'Do not know about MSDS' was 73.6%. In addition to, education in the types and characteristics of chemicals(74.5%) does not receive all the higher education. For the question of 'To prevent human risks and accidents, is to provide chemical information needed', the answer rate of 'needed' was 87.2%. Moreover, the answer rate of 'To provide chemical information that could prevent accidents' was 76.6%. Therefore it was found that dental technicians need to be provided for chemical information. In addition, they wanted to get education related to chemicals used in the workplace(80.5%), and 90.9% was answered that they was willing to keep MSDS in they workplace. Conclusion: This study investigated the current dental laboratories(rooms) and the MSDS for the awareness and recognition of workers was very low, education was not being conducted properly. The dental laboratories(rooms) of the compact characteristics of the MSDS was not reasonably accessible and the furnishing location, dental laboratories(rooms) for the real item was needed for improvement. MSDS for dental technicians through education and promotion of information about chemicals and chemicals was to prevent health problems caused by the MSDS that will raise awareness of the necessity.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.11
• /
• pp.5-10
• /
• 2020

Although pile driver overturning accidents at construction site are not frequent, most leads to serious disasters. The main cause of accidents is uneven settlement of the ground. To prevent this, related guidelines such as KOSHA-C-101-2014, KOSH-A-GUIDE-71-2012, Occupational Safety and Health Standards, and NCS stipulate the installation of steel plates over ground. However, since the required steel plate thickness considering the self-weight of pile drivers and the underlying ground condition is not quantitatively presented, it is randomly applied in the field. In this study, the required minimum steel plate thickness was analyzed based on a numerical analysis (Plaxis 2D). Settlements and soil failure were calculated according to the different type of soils (sand, clay), load distribution and steel plate thickness (10mm, 20mm, 30mm, 40mm). Under all conditions, 10mm steel plate causes soil collapse. From thickness 20mm, the ground uneven subsidence is within 2° of the allowable leader angle.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.147-154
• /
• 2020

The questionnaire survey was carried out to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) to the onsite specialist, such as a fishing master, chief engineer and fisher in stow net fishing vessel from June to July 2018. The results are as follows. A total of 134 cases were surveyed, including 53 cases in Yeosu, 44 cases in Mokpo, 30 cases in Boryeong and 7 cases in Gunsan. Approximately 60% of the respondents on board the stow net fishing vessel were more than 20 years old, and the boarding experience was seasoned and suitable for the respondents. In the 4M analysis by safety accident factor during fishing work, the mechanical factors included 51 cases (25.0%) of decrepit equipment or poor maintenance and 49 cases (24.0%) of systemic error of fishing equipment. The environmental factors exhibited 71 cases (33.5%) of poor communication by mixed manning of foreign fishermen and 63 cases (29.7%) of poor environment such as heavy weather etc. The human factors showed 78 cases (37.3%) of personnel's carelessness and 45 cases (21.5%) of unskillfulness of operating net and haulers. The management factors exhibited 59 cases (32.1%) of work practice of poor safety precautions and 56 cases (30.4%) of inadequacy of education on hazard factor. The results are expected to contribute to the creation of a safe operating environment for stow net fishery, such as a fisher boarding a stow net fishing vessel, enabling the analysis of major causes of working safety accidents by cause.

• Journal of the Korean Institute of Gas
• /
• v.17 no.4
• /
• pp.39-44
• /
• 2013

There have been large explosions at some chemical plants recently. Accidents in chemical plants have been caused mainly by servicing for maintenance. There is a need to find a key target for effective injury prevention in maintenance. In this paper, facilities were selected as a key target and the risk priority numbers of the facilities were calculated in order to prioritize preventative measures. The research method was based on the followings; the list of the facilities is found through injury analysis. Then, the risk of each facility was calculated by the frequency of accidents and the working day loss through injuries. In addition, the risk of the facilities was calculated again by the frequency and the severity based on knowledge and experience of experts. As a result, the facilities in chemical plant maintenance are ranked in order of high to low risk priority number; reactor, dryer, tank lorry, etc. In the future, special measures and attention should be directed according to the risk priority number during the maintenance of chemical plants.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.1-8
• /
• 2020

Mobile elevating work platforms (MEWPs) consist of a work platform, extending structure, and chassis, and are used to move persons to working positions. MEWPs are useful but are composed of pieces of equipment, and accidents do occur owing to equipment defects. Among these defects, accidents caused by the fracture of bolts fixed to the extension structure and swing system are increasing. This paper presents a failure analysis of the fixing bolts of MEWP. Standard procedure for failure analysis was employed in this investigation. Visual inspection, chemical analysis, tensile strength measurement, microstructural characterization, fractography analysis by Optical Microscope(OM) and Scanning Electron Microscopy(SEM), and finite element analysis (FEA) were used to analyze the failure of the fixing bolts. Using this failure analysis approach, we found the root cause of failure and proposed a means for solving this type of failure in the future. First, the chemical composition of the fixing bolt is obtained by a spectroscopy chemical analysis method, which determined that the chemical composition matched the required standard. The tensile test showed that the tensile and yield strengths were within the required capacity. The stress analysis was carried out at five different boom angles, and it was determined that the fixing bolt of MEWP can withstand the loads at all the boom angles. The outcomes of the fatigue analysis revealed that the fixing bolt fails before reaching the design requirements. The results of the fatigue analysis showed primarily that the failure of the fixing bolt was due to fatigue. A visual inspection of the fractured section of the fixing bolt also confirmed the fatigue failure. We propose a method to prevent failure of the fixing bolt of the MEWP from four different standpoints: the manufacturer, safety certification authority, safety inspection agency, and owner.

• Journal of Urban Science
• /
• v.8 no.1
• /
• pp.33-44
• /
• 2019

The purpose of this study is to investigate the cause of repeated accidents through the investigation and analysis of the collapse cases of domestic earthquakes in order to prevent the earthquake disaster in the urban redevelopment and reconstruction. It is designed and constructed to draw out various problem factors and to find solutions to these problems. And the contents related to various laws and systems of the construction project management stage. Especially. In the management of the construction management centered on the safety management and quality control of the technical aspect design, supervision, construction phase through the cause of the accident and improvement measures based on the investigation report of the collapse of the construction site near Sangdo Kindergarten in Seoul. Supervisor. And constructors should be settled on the responsibility and responsibility of God. In order to achieve the purpose of the project, a system is established to link worker-centered occupational safety and health management with technology-based safety construction management, and analysis of how the quality control of the earthquake prevention affects safety construction management The purpose of this study is to prepare the optimum management plan of construction business.As a result of this study, it is aimed to accomplish the purpose of small scale redevelopment and reconstruction construction project by providing optimization method in the stage of construction project management in order to prevent collapse caused by differences in design,Is expected.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.69-81
• /
• 2019

Objective: The purpose of this study was to find out what kind of change in death rate when job stress is solved by calculating job stress relieve coefficient. Methods: This study used the data of the fourth working condition survey. Regression analysis was used to determine the relationship between health effects recognition and Death rate per 10,000 workers. After that the recognizing and non - recognizing groups were categorized by health effects recognition, and the differences between the two groups were confirmed by cross tabulation analysis. Results: Regress analysis P-value is 0.011 and $R^2$ is 0.979. Death rate per 10,000 worker increased with the increase in the number of non - health impact recognizing group. The relieve factors were (1) work culture(2.859) (2) physical environment(2.184), (3) improper reward (1,839), (4) relationship conflict(1.646), (5) job requirement(1.613), (6) job autonomy(1.354), (7) job instability(1.334), And (8) organizational system(1.201). The higher the relieve coefficient is, the higher the probability of belonging to the non - health impact recognizing group when there is no job stress factor. Conclusions: When job stress is resolved, there is a high probability that the health impact recognition is reduced, which can lead to an increase in death rate. but according to previous studies, Job stress can cause accidents by reducing the safety behavior of accidents. The job stress management plan should simultaneously consider reducing job stress and increasing health impact recognition.