• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2758-2760
• /
• 1999

ASIC chip design for motor control has been a subject of increasing interest since effective system-on-a-chip design methodology was developed. This paper investigates the design and implementation of ASIC chip for speed control of induction motor using VHDL which is a standarded hardware description language. The presented system is implemented using a simple electronic circuit based on FPGA.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1099-1101
• /
• 2000

ASIC chip design for motor control has been a subject of increasing interest since an effective methodology of system-on-a-chip design was developed. This paper investigates the design and implementation of ASIC chip for vector control of induction motor using VHDL which is a standard hardware description language. The vector control algorithm is finally implemented using a simple electronic circuit based on FPGA. The performance of the designed ASIC is verified through simulation and experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.929-935
• /
• 2003

An analog/digital mixed mode ASIC for network synchronization of ATM switching system has been designed and fabricated. This ASIC generates a 234.7/46.94 ㎒ system clock and 77.76/19.44 ㎒ user clock using 46.94 ㎒ transmitted clocks from other systems. It also includes digital circuits for checking and selecting of the transmitted clocks. For effective ASIC design, full custom technique is used in 2 analog PLL circuits design, and standard cell based technique is used in digital circuit design. Resistors and capacitors for analog circuits are specially designed which can be fabricated in general CMOS technology, so the chip can be implemented in 0.8$\mu\textrm{m}$ digital CMOS technology with no expensive. Testing results show stable 234.7 ㎒ and 19.44 ㎒ clocks generation with each 4㎰ and 17㎰ of low ms jitter.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.695-701
• /
• 1988

본 연구에서는 구조적 표현의 화상 처리 알고리즘인 BF(Breadth First) 선형 4진 트리 알고리즘(BFQT 알고리즘)의 압축, 재생부를 하드웨어화 하여 ASIC(Application Specific Integrated Circuit)을 설계한다. ASIC과 IBM PC와의 인터페이스를 명시하며, 새로운 하드웨어 알고리즘을 도입하여 ASIC의 세부구조를 설계한다. 소프트웨어로 수행할 때 보다 제안된 ASIC으로 수행할 때가 압축은 약 21배, 재생은 약 4배 빨라지는 것으로 추정된다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.5
• /
• pp.66-76
• /
• 2000

This paper describes design and implementation of caption-processing ASIC(Application Specific Integrated Circuits) for OSD(On Screen Display) of karaoke system. The OSD of conventional karaoke system was implemented by a general purpose DSP, however this paper suggest a design to save hardware resources. The ASIC receives commands and data of graphic and caption from host processor, and then modifies the data to have various graphic effects. The design has been done by schematic and VHDL coding. The design was verified by logic simulation and FPGA emulation on the real system. The chip was fabricated with 0.8${\mu}{\textrm}{m}$ CMOS SOG, and worked properly at the karaoke system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.220-229
• /
• 1996

We presetn sytem-level simulation methodology as well as environment setup established for CDMA digtial cellular mobile station in an effort to verify CDMA modem ASIC design. To make the system-level simulation feasible, behavioral modeling of a microcontroller was first carried out with VHDL. In addition, models written in C language were also developed to provide ASIC with realistic input data. Finally, the netlist of CDMA modem ASIC was loaded on the a hardware accelerator, which was interfaced with VHDL simulator, and ismulation was performed by excuting the actual CDMA call processing software. Simulation resutls thus obtained were confirmed by comparing them with the emulation resutls from the actual system constructed on hardware modeler. these methods were proved to be effective in both discovering in advance malfunctions when embedded in the system or design errors of ASIC and reducing simulation time by a factor of as much as 20 in case of simulation at gate-level.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1597-1602
• /
• 1999

An analog / digital mixed mode frequency multiplication and distribution ASIC for switch link or network synchronization of ATM switching system for B-ISDN has designed. This ASIC generates 234-7 MHz system clock and 77.76 MHz, 19.44 MHz user clocks using 46.94 MHz external clock. It also includes digital circuits for checking and selecting between the two external clocks. For effective ASIC design, full custom technique is used in analog PLL circuit and standard cell based technique is used in digital circuit. Resistors and capacitors are specially designed so the chip can be implemented in 0.8$\mu\textrm{m}$ digital CMOS technology.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.109-112
• /
• 2000

The satellite communications are expected to play an important role to provide broadband multimedia services in the 21st century. According to this requirements, this paper describes the design and implementation of ATM-based high speed satellite modem ASIC chipset. The ASIC chip consists of three main parts, CODEC, Modulator and Demodulator. It supports burst and continuous mode operation with TDMA frame consisted of Reference bursts, Inbound burst, and Traffic burst. The maximum transmission rate is OC-3 (155Mbps) and the maximum operating clock speed is 220MHz. This ASIC chip was implemented with 0.25um CMOS technology.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1212-1214
• /
• 2001

In this paper ASIC design technique using VHDL is applied to MRAS based speed sensorless control of induction motor. ASIC for MRAS based speed sensorless control is designed through the description of speed estimator using FSM, stator voltage controller, flux angle detector, coordinate transformation, and inverter switching signal output. Finally the above system has been implemented on the FPGA (VERTEX XCV400HQ240). Simulation and experiment have been performed to verify the performance of the designed ASIC.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.839-842
• /
• 1998

The wide spread of multimedia system demands a large viewin gdesply device which can inform a message to many peoples in open area. This paper is about the design, simulating and testing of a large viewing LED pannel control ASIC(application specific integrated circuit). This LED pannel control ASIC runs on 16 bit microprocessor MC68EC000 and has following functions:16 line interlaced LED pannel controller, memory controller, 16 channel priority inerrupt controller, 2 channel direct memory access controller, 2 channel 12 bit clock and timer, 2 channel infrared remocon receiver, 2 channel RS-232C with 16byte FIFO, IBM PC/AT compatible keyboard interface, battery backuped real time clock, ISA bus controller, battery backuped 256 byte SRAM and watech dog timer. The 0.6micron CMOS sea of gate is used to design the ASIC in amount of about 39,000 gates.