• The Korean Journal of Applied Statistics
• /
• v.31 no.1
• /
• pp.13-28
• /
• 2018

The ministry of Environment of Korea initiated two follow-up surveys in 2005 and 2006 to investigate environmental effect on children's health. These two cohorts, referred to as the 2005 Cohort and 2006 Cohort, were followed up three times every two years. This data set was referred to as the Children's Health and Environmental Research (CHEER) data set. This paper reproduces the existing research results of Kim et al. (Journal of the Korean Data and Information Science Society, 25, 987-998, 2014) and Lee et al. (The Korean Journal of Applied Statistics, 29, 1295-1310, 2016) and derive a benchmark dose lower limit (BMDL) for blood lead level for attention deficit hyperactivity disorder (ADHD) after pooling two cohort data sets. The different ADHD rating scales were unified by applying the conversion formula proposed by Lee et al. (2016). The random effect model and AR(1) model were built to reflect the longitudinal characteristics and regression to the mean phenomenon. Based on these models the BMDLs for blood lead levels were derived using the BMDL formula and the simulation. We obtained a hight level of BMDLs when we pooled two independent cohort data sets.

• Journal of Fashion Business
• /
• v.27 no.1
• /
• pp.110-125
• /
• 2023

Virtual idol groups are a product of changes in cultural content and development of digital technology. The purpose of this study is to derive the characteristics of technical expression and fashion of virtual idol groups of Korean entertainment companies, and the significance of this study is to provide basic data for creating a new content business model for virtual idol groups. The research method of this study consisted of literature research and case analysis. Korean virtual idol groups 'K/DA', 'Aespa', and 'Eternity', which show the evolved business model of the entertainment industry through rapid advances in digital technology, were selected as the subject of case analysis for this study, and newspaper articles were searched by keywords and analyzed. As a result of the study, the technical expressions shown in Korean virtual idol groups were 'implementation of realistic content through interaction technology', 'delicate motion expression through motion capture technology', and 'convergence of information between the real world and virtual world through AR technology', 'provision of experience similar to reality by VR technology' and 'formation of cultural contents by Deep Real technology' were deriven. In addition, the characteristics of the Korean virtual guide idol group's fashion are 'marketing strategy through collaboration with fashion items', 'giving recognition as a digital fashion icon of real existence', 'creating a sensuous image as a fashion brand ambassador' and 'fashion style expression of the Z generation's sensibility'.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.117-128
• /
• 2000

Sand compaction pile(SCP) is one of the ground improvement techniques which is being used for not only accelerating consolidation but also increasing bearing capacity of loose sands or soft clay grounds. In this study, laboratory model test and large-scale direct shear test were performed to investigate the effects of area replacement ratio of composite ground in order to find out the optimum value of area replacement ratio for the ground improvement purpose. Area replacement ratios of 20%, 30%, 40%, 50%, 60% were chosen respectively in the model tests to study the effects of area replacement ratio on variations of stress concentration ratio, settlement and shear strength characteristics of composite ground. In large-scale direct she4ar tests, area replacement ratios of 20%, 30%, 46% were applied to study their effects on shear strength characteristics of composite ground.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.1001-1013
• /
• 2018

A new type of uranium occurrence in Korea was identified in pegmatitic and hydrothermally altered granite in the Daejeon area. The U-bearing parts typically include muscovite, pink-feldspar and sericite as alteration minerals. In this study, the geochemical characteristics and alteration age of the granitic rocks were examined to provide evidence for hydrothermally-enriched uranium. The K-Ar ages of muscovite coexisting with U-bearing minerals were determined as 123 and 128 Ma. The U-bearing rocks have relatively low ($CaO+Na_2O$), high $K_2O$ contents, and high alteration index values by major element geochemistry. The trace element geochemistry shows that the uraniferous rocks have significantly low Th/U ratios and strongly differentiated features. The rare earth element patterns indicate that the uraniferous rocks have a low total REE and LREE contents with depletion of Eu. Considering the geochemical variation of the granitic rock major, trace and rare earth elements, it can be concluded that uranium enrichment in pegmatites and altered granite should be genetically related to post-magmatic hydrothermal alteration of K-metasomatism after emplacement of the two-mica granite. This is the first report for geochemical characteristics of Mesozoic granite-related U-occurrences in South Korea. This study will help further research for uranium deposits with similarities in geological setting, mineralogy and age data between South China and Korea, and can also be expected to help solve the source problems related to high uranium concentrations in some groundwater occurring in the granitic terrane.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.18-22
• /
• 2023

We have investigated the effect of the concentration of oxygen vacancies on the characteristics of Mo-doped ZnO (MZO) thin films for the TCO (transparent conducting oxide). For this purpose, MZO thin films were deposited by RF magnetron sputtering at different substrate temperature from room temperature to 300℃. The electrical resistivity of the MZO films decreases with increasing substrate temperature up to 100℃ and then gradually increases at higher temperatures. To investigate the influences of the ambient gases, the flow rate of oxygen and hydrogen in argon was varied from 0.1 sccm to 0.5 sccm. The MZO thin films were preferentially oriented to the (002) direction, regardless of the ambient gases used. The electrical resistivity of the MZO thin films increased with increasing O₂ flow rates, whereas the electrical resistivity decreased sharply under an Ar+H₂ atmosphere and was nearly the same, regardless of the H₂ flow rate used. As the oxygen vacancy concentration increases, the resistivity intended to decrease. In conclusion, Oxygen vacancy affects the MZO thin film's electrical characteristics. All the films showed an average transmittance of over 80% in the visible range.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.13-26
• /
• 2013

This study is about development of technology system for MIS(Minimally Invasive Surgery) robot of S. Korea analysed by the application of scenario planning. MIS robot industry receive attention as a new growth industry for national and international and is noticeable for the leading industry of future era in Korea. In this paper was examined the characteristics of an MIS robot technology and its components. It was investigated about the technology of an overseas MIS robot(especially U.S.A) and Korean domestic MIS robot and understood such as the country's policy propulsion issues then, was searched about development direction of the future. As a result, the future policy for MIS robot of S. Korea is to further spur the development of new MIS robot technology and more improvement of the technology level of MIS robot with AR(Augmented Reality) display.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.88-101
• /
• 2011

Locative media is fundamentally different from traditional media in terms of being packed with user's space, place, and position nearby, which does not simply mean user's physical coordinates. This study has been started that I was drawn by the tendency of which current locative media contents are based on 'location-based information,' and closely related with 'Augmented Reality.' I wonder how media user's psychological experience/involvement are revealed when the media environment changes by the progress of technology. I wonder how media users perceive 'social presence' formed by locative media in current locative media environment. Particularly, the fact that user's perception of social presence formed in locative media conflicts with the previous computer-mediated communication(CMC)'s attributes deepened my curiosity. In this study, the idea of 'more-proper-construct' is suggested, the characteristics of social presence in current locative media is considered, and is investigated by qualitative methodology how the 'location-based' attributes and 'AR' contribute to forming the social presence.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.304-310
• /
• 2020

The technology in 3D modelling have advanced not only maps, heritages, constructions but also trees modelling. By laser scanning(Faro s350) and photogrammetry software(Pix4d) for 3D modelling, this study compared with real coniferous tree and both technology's results about characteristics of shape, texture, and dimensions. As a result, both technologies all showed high reproducibility. The scanning technique showed very good results in the reproduction about bark and leaves. Comparing the detailed dimensions on it, the error between the actual tree and modelling with scanning was 1.7~2.2%, and the scanning result was larger than the actual tree. The error between the actual tree and photogrammetry was only 0.2~0.5%, which was larger than the actual tree. On the other hand, the dark areas's modelling was not fully processed. This study is meaningful as a basic research that can be used for tree DB on BIM for the landscape architecture, landscape design and analysis with AR technology, historical tree and heritage also.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.72-72
• /
• 2001

Plasma polymerized thin films have been deposited on Si(lOO) substrates at $25-400^{\circ}C$ using thiophene ($C_4H_4S$) precursor by plasma assisted chemical vapor deposition (PACVD) method for low-dielectric device application. In order to compare physical properties of the as-grown thin films, the effects of the plasma power, gas flow ratio and deposition temperature on the dielectric constant and thermal stability were mainly studied. XRD and TED studies revealed that the as-grown thin films have highly oriented amorphous polymer structure. XPS data showed that the polymerized thin films that grown under different RF power and deposition temperature as well as different gas ratio of $Ar:H_2$ have different stoichiometric ratio of C and S compared with that of monomer, indicating a formation of mixture polymers. Moreover, we also realized that oxygen free and thermally stable polymer thin films could be grown at even $400^{\circ}C$. The results of SEM, AFM and TEM showed that the polymer films with smooth surface and sharp interface could be grown under various deposition conditions. From the electrical property measurements such as I-V and C-V characteristics, the minimum dielectric constant and the best leakage current were obtained to be about 3.22 and $10-11{\;}A/\textrm{cm}^2$, respectively.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.548-554
• /
• 2001

A GA(Genetic Algorithm) based 3D-PTV technique has been developed. The measurement system consists of three CCD cameras, Ar-ion laser, an image grabber and a host computer. The fundamental of the developed technique was based on that one-to-one correspondence is found between two tracer particles selected at two different image frames taking advantage of combinatorial optimization of the genetic algorithm. The fitness function controlling reproductive success in the genetic algorithm was expressed by a kind of continuum theory on the sparsely distributed particles in space. In order to verify the capability of the constructed measurement system, a performance test was made using the LES data set of an impinging jet. The developed 3D-PTV system was applied to the measurement of flow characteristics of the wake of a circular cylinder.