• Steel and Composite Structures
• /
• v.25 no.2
• /
• pp.217-229
• /
• 2017

The effect of column loss location on the structural response of steel moment resisting frames (MRF) is investigated in this study. A series of nonlinear static and dynamic analyses were performed to determine the resistance of a generic frame to an arbitrary column loss and detect the structural members that are susceptible to failure progression beyond that point. Both force-controlled and deformation-controlled actions based on UFC 4-023-03 and ASCE/SEI 41-06 were implemented to define the acceptance criteria for nine APM cases defined in this study. Results revealed that the structural resistance against an arbitrary column loss in the top story is at least 80% smaller than that of the bottom story. In addition, it was found that the dynamic increase factor (DIF) at the failure point is at most 1.13.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.117-127
• /
• 2007

The exposed aggregate PCC(EAP) pavements have been successfully used in Europe and Japan as low-noise pavements. Coarse aggregate are exposed on the pavement surface texture of EAP by removing mortar of surface. The pavement surface texture should maintain not only low-noise characteristic but also adequate skid resistance level during the performance period. Skid resistance decreased with wearing and polishing of tire and pavement surface due to the repetition of tire-pavement contact. Since the tires mainly contact the exposed coarse aggregate, the shape and rock type of coarse aggregate significantly influence wearing and polishing of EAP pavements. The test for resistance to abrasion coarse aggregate by use of the Los Angeles machine(KS F 2508) and the method of test for resistance to abrasion coarse aggregate by use of the Accelerated Polishing Machine(ASTM D 3319-90) are generally used to evaluate polishing characteristics of aggregate. In this study, polishing of coarse aggregate of different five rock types were evaluated by KS F 2508(LA abrasion test) and ASTM D 3319-90(PSV method). The results of LA abrasion test and PSV method were contrary to each other. Since LA abrasion test is estimated the quantity of abrasion by the impact of aggregate, it may not be adequate to evaluate the polishing of aggregate by the repetition of tire. In the case of PSV method, the resistance of polishing is estimated the skid resistance variation of polished aggregate after repetition of tire. The PSV method is adequate for the evaluation on polishing of coarse aggregate. From the test results of PSV method, it was founded that rock type, specific gravity, coarse aggregate angularity, flat or elongated particles in coarse aggregate are significant to the resistance characteristic of coarse aggregate.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.6
• /
• pp.198-210
• /
• 2022

The southern strait of Jeju is a divergence point of the Tsushima Warm Current (TWC), and it is the starting point of the thermohaline circulation in the waters of the Korean Peninsula, affecting the size and frequency of marine disasters such as typhoons and tsunamis, and has a very important oceanographic impact, such as becoming a source of harmful organisms and radioactively contaminated water. Therefore, for an immediate response to these maritime disasters, real-time ocean observation is required. However, compared to other straits, in the case of southern Jeju, such wide area marine observations are insufficient. Therefore, in this study, surface current field of the southern strait of Jeju was calculated using High-Frequency radar (HF radar). the large surface current field is calculated, and post-processing and data improvement are carried out through APM (Antenna Pattern Measurement) and FOL (First Order Line), and comparative analysis is conducted using actual data. As a result, the correlation shows improvement of 0.4~0.7 and RMSE of about 1~19 cm/s. These high-frequency radar observation results will help solve domestic issues such as response to typhoons, verification of numerical models, utilization of wide area wave data, and ocean search and rescue in the future through the establishment of an open data network.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.159-167
• /
• 2020

In actual battlefield environment, IFF radar plays an important role in distinguishing friend or foe targets and assigning unique identification code to management. Performance of IFF radar is greatly affected by radio environment including atmosphere and terrain, target maneuvering and operation mode. In this paper, M&S tool is consisted of interrogator(IFF radar) and answering machine(target) for radar performance analysis. The wave propagation model using APM(Advanced Propagation Model) and radar actuator system were modeled by considering beam waveform of individual operation beam mode. Using this tool, IFF radar performance was analyzed through two experimental results. As a result, it is expected that performance of IFF radar can be predicted in the operational environment by considering target maneuvering and operation beam mode.

• Anatomy and Cell Biology
• /
• v.52 no.1
• /
• pp.38-42
• /
• 2019

This study investigated and classified the various types of moderator band (MB) in relation to the anterior papillary muscle, with the aim of providing anatomical reference information and fundamental knowledge for use when repairing the congenital defects and understanding the conduction system. The study investigated 38 formalin-fixed human hearts of both sexes obtained from donors aged 38-90 years. The MB was evident in 36 of the 38 specimens (94.7%). The morphology of the MB and its connection with the APM took various forms. The MBs that had a distinct shape were classified into three types according to their shape: cylindrical column, long and thin column, and wide and flat column. Types 2 and 3 were the most common, appearing in 15 (41.7%) and 14 (38.9%) of the 36 specimens, respectively, while type 1 was observed in seven specimens (19.4%). Type 3 was divided into subtypes based on their length. The MB usually originated from a single root (91.7%), with the remainder exhibiting double roots. The pairs of roots in the latter cases had different shapes. The originating point of the MB ranged from the supraventricular crest to the apex of the ventricle. The most-common originating point was in the middle (25 of 36 specimens, 69.4%), followed by the upper third (13.9%), the lower third (11.1%), and the top fifth (5.6%) of the interventricular septum. This study has produced fundamental anatomical and clinical information that will be useful when designing cardiac surgical procedures.

• Journal of Navigation and Port Research
• /
• v.46 no.2
• /
• pp.110-120
• /
• 2022

Spain is Europe's second-largest country with total throughput reaching 16.7 million twenty-foot equivalent units (TEU) by 2020. The purpose of this study was to measure and compare the efficiency of 17 container terminals. As a study method, the DEA-CCR model, undesirable variable, and Malmquist Index (MI) were used for data envelopment analysis (DEA). The study results are as follow: (1) DEA-CCR is used to evaluate basic efficiency. The most efficient terminals are decision-making units DMU 1 (APM Terminals (Algeciras Port)), DMU 2 (Total Terminal International Algeciras (Algeciras Port)) and DMU 5 (Barcelona Europe South Terminal (Barcelona Port)). (2) Undesirable DEA was conducted to suggest inefficiency from the undesirable output. Overall, the efficiency scores were reduced. However, DMU 1, DMU 2, and DMU 5 maintained efficiency scores regardless of the finish factor. (3) Malmquist Index was used to observe technology and efficiency changes dynamically. The changes in TCI affected Spanish container terminals more than the Technical Efficiency Change Index (TECI) in 2018-2019. However, in 2019-2020, the TECI was 2.706, higher than the TCI value, indicating that the change in TECI had more influence on the increase in productivity. This study offers a broader understanding of Spanish container terminals.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.128-130
• /
• 2012

본 논문은 교육 현장의 전산 기자재 관리의 비효율성을 바꿔나가고 새로운 변화에 적응력을 키워나가는 취지에서 접근하였다. 현재 각 학교에는 교원 1인당 1 PC가 보급되어 있으며, 네트워크 환경도 잘 구성되어 있다. 이러한 환경을 기초로 본 논문에서는 학교에서 작성 되고 있는 관리 대장을 전자 문서화함으로써, 관리 대장의 검색, 생성, 삭제, 삽입, 변환 등에 따른 업무 비효율성을 최소화하였다. 본 연구에서는 전자 문서화 시스템의 서버 프로그램으로 RW-APM을 사용하였으며, 여러 가지 대화형 게시판과 SMS를 이용한 관리자 호출을 통해 관리자뿐 아니라 일반 사용자들도 시스템과 학교 장비의 문제점에 대해 의견을 나눌 수 있도록 하였다. 본 연구에서 개발된 전산 기자재 관리 대장 시스템은 여러 실무 담당자들의 의견을 수용함으로써 교육 현장에 최적화 된 환경을 제공하기 위해 노력하였다. 이러한 시스템을 확장하여 활용한다면 교육 지원 활동에 대한 효율성을 높일 수 있으며, 이는 교사와 학생들의 교육 활동에 긍정적인 효과를 줄 것으로 기대된다.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.2
• /
• pp.45-49
• /
• 2011

The performance of five newly evolved cross breeds were evaluated across seasons to understand the genotype and environment interactions and their stability under fluctuating tropical environmental conditions along with control hybrids $PM{\times}CSR2$ and $APM1{\times}APS8$. The data was collected on eight economic traits namely fecundity, yield per 10,000 larvae by number, yield per 10,000 larvae by weight, survival rate, cocoon weight, cocoon shell weight, cocoon shell ratio and filament length. The data was subjected for Analysis of Variance (ANOVA) and relevant statistical methods. The performance data obtained was further subjected for multiple trait evaluation index method. The ranks were adjudicated based on the index values. The two hybrids viz., $MSO3{\times}APS45$ and $MSO1{\times}APS12$ performed well under diversified environmental conditions indicating their overall stability and superiority. These hybrids revealed highly significant (p < 0.01) improvement for the majority of the traits over the control hybrids.

• Journal of Platform Technology
• /
• v.9 no.1
• /
• pp.15-22
• /
• 2021

In a smart manufacturing environment, more and more devices are connected to the Internet so that a large volume of data can be obtained during all phases of the product life cycle. The large-scale industries, companies and organizations that have more operational units scattered among the various geographical locations face a huge resource consumption because of their unorganized structure of sharing resources among themselves that directly affects the supply chain of the corresponding concerns. Cloud-based smart manufacturing paradigm facilitates a new variety of applications and services to analyze a large volume of data and enable large-scale manufacturing collaboration. The manufacturing units include machinery that may be situated in different geological areas and process instances that are executed from different machinery data should be constantly managed by the super admin to coordinate the manufacturing process in the large-scale industries these environments make the manufacturing process a tedious work to maintain the efficiency of the production unit. The data from all these instances should be monitored to maintain the integrity of the manufacturing service system, all these data are computed in the cloud environment which leads to the latency in the performance of the smart manufacturing service system. Instead, validating data from the external device, we propose to validate the data at the front-end of each device. The validation process can be automated by script validation and then the processed data will be sent to the cloud processing and storing unit. Along with the end-device data validation we will implement the APM(Asset Performance Management) to enhance the productive functionality of the manufacturers. The manufacturing service system will be chunked into modules based on the functionalities of the machines and process instances corresponding to the time schedules of the respective machines. On breaking the whole system into chunks of modules and further divisions as required we can reduce the data loss or data mismatch due to the processing of data from the instances that may be down for maintenance or malfunction ties of the machinery. This will help the admin to trace the individual domains of the smart manufacturing service system that needs attention for error recovery among the various process instances from different machines that operate on the various conditions. This helps in reducing the latency, which in turn increases the efficiency of the whole system

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.117-129
• /
• 2010

The purpose of this paper is to develop a web-based information system for rural settlement environment diagnosis which is useful to apply the village based evaluation for new rural development projects. To achieve this purpose, this study performed : 1) analyzing the business process in the field of rural settlement environment diagnosis, 2) designing the data flow diagram and the database based on settlement environment diagnostic indices(SEDI), and 3) developing the system using APM (Apache, PHP, and MySQL) of web-system development environment. The developed system was applied to the study rural villages for testing of efficient and logical working. Users of the system, such as, researchers, decision makers, and rural residents, can input directly the village data to diagnose through a file format of Excel in MS Office. Futhermore, they can analyze the visual results with graphic and graph types, simultaneously. From the results of this study, it showed that the developed system enables decision-makers not only to assist the planning process of the rural village development project, but also to improve the level of information technology in the research and planning field concerning with rural development.