• 약학회지
• /
• 제38권6호
• /
• pp.800-805
• /
• 1994

Antacid(AM, 600 mg/kg=aluminium hydroxide, magnesium hydroxide, and simethicone with a ratio of 1 : 1 : 0.1) and aceglutamide aluminium(AGA, 263 mg/kg)-Effect of the combined preparation containing on the gastric mucosal hexosamine, sialic acid, and aluminium contents adhered to the gastric wall of the rat was investigated. Severe ulcers were produced in rats by injecting of $30\;{\mu}l$ acetic acid(30%) into the subserosal layer of one position in the corpus. When given orally for 15 consecutive days, AM(1,200 mg/kg), AGA(525, 1,050 mg/kg), and the combined preparation significantly decreased the ulcer area. AGA(525, 1,050 mg/kg) and the combined preparation also increased the amount of hexosamine and sialic acid in the intact and ulcerated areas. On the other hand, the contents of hexosamine and sialic acid were not affected by AM (600, 1,200 mg/kg). The amount of aluminium adhered to the gastric wall of the rat was higher in the combined preparation when compared to the AM(600 mg/kg) and AGA(263 mg/kg). The aluminium contents adhered may play an important role protecting mucosa from aggresive action of gastric juice and potenting defensive factors through the increase of mucosa-forming components by AGA.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.621-631
• /
• 2017

Many developing countries considering the introduction of nuclear power find that large-scale reactor plants in the range of 1,000 MWe to 1,600 MWe are not grid appropriate for their current circumstance. By contrast, small modular reactors are generally too small to make significant contributions toward rapidly growing electricity demand and to date have not been demonstrated. This paper proposes a radically simplified re-design for the nuclear steam cycle for a medium-sized reactor plant in the range of 600 MWe. Historically, balance of plant designs for units of this size have emphasized reliability and efficiency. It will be demonstrated here that advances over the past 50 years in component design, materials, and fabrication techniques allow both of these goals to be met with a less complex design. A disciplined approach to reduce component count will result in substantial benefits in the life cycle cost of the units. Specifically, fabrication, transportation, construction, operations, and maintenance costs and expenses can all see significant reductions. In addition, the design described here can also be expected to significantly reduce both construction duration and operational requirements for maintenance and inspections.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.62-67
• /
• 2000

Metallurgical characteristics of bonded region and high temperature mechanical properties of heat resistant alloy, Fe-35Ni-26Cr during liquid phase diffusion bonding were investigated employing AM17 insert metal. The insert metal for bonding, AM17 was newly developed Ni-base metal using interpolation method. Bonding of specimens were carried out at 1,403~1,463K for 600s in vacuum. The microconstituents in the bonded interlayer disappeared in the bonding temperature over 1,423K. The microstructures, alloying elements and hardness distribution in the base metal. The tensile strength and elongation of the joints at elevated temperatures were the same level as one of the base metal in the bonding temperature over 1,423K. The creep rupture strength and rupture lives of joints were almost identical to those of base metal.

• 한국전자파학회논문지
• /
• 제12권4호
• /
• pp.600-610
• /
• 2001

본 논문에서는 초고속 위성통신 시스템의 채널 특성에 대한 성능 분석을 하였다. 고속 데이터 전송의 열화요인으로 작용하는 군지연과 비선형 분석을 통하여 다양한 전송 서비스를 제공하는 Ka 대역의 초고속 전송 시스템의 채널 성능 영향을 고찰하였다. 전송 데이터가 증가할수록 군지연과 비선형에 의한 영향은 증가하며, 군지연 선형 성분과 비선형의 AM-AM 성분이 시스템 성능 열화에 지배적으로 작용하는 것을 알 수 있었다. 고속 데이터에 따른 광대역 전송 대역폭으로 낮은 군지연과 이득 평탄도를 얻기가 어려우므로 주요 열화 요소를 등화하여 수십 Mbps에서부터 수백 Mbps 의 넓은 범위의 서비스를 동일 시스템에서 효과적으로 제공하여야 한다. 분석된 결과는 최적의 동작점을 갖는 초고속 위성통신 시스템을 설계하고 운용하는데 활용될 수 있다.

• 한국통신학회논문지
• /
• 제31권1A호
• /
• pp.48-57
• /
• 2006

진행파관 증폭기는 입력되는 RF(radio-frequency)신호를 일정한 크기로 증폭하여 안테나로 출력하는 기능을 수행한다. 본 논문에서는 위성통신용 고출력 SHF(Super High Frequency) 대역 진행파관 증폭기의 캐소드 리플 개선방안을 제안한다. 600W급 SHF대역 진행파관 증폭기의 구현 및 실험을 통하여 제안한 방안이 설계규격을 만족시키는 결과를 얻었다. 또한 RF부로 공급되는 보조전원의 잡음을 저감하여 예측치 못한 잡음성분들을 제거함으로서 RF 성능이 개선되었다. 따라서 본 논문에서 제안한 방안은 매우 효과적이며, 차후 유사장비 개발 시 적용가능 할 것으로 판단된다.

• 자원리싸이클링
• /
• 제14권4호
• /
• pp.22-33
• /
• 2005

폐타이어 분말(GRT)을 재활용하기 위하여 sheet type 4그룹과 soft type 1그룹의 자체보수성 방수재를 제조하였다. 각각 방수재의 방수특성을 고찰하기 위하여 방수재들의 물성을 측정하였다. 방수재는 GRT/ 고흡수성수지/ binder로 구성되었으며, internal mixer로 혼합한 후 hot press로 성형하여 제조 되었다. 방수재 제조에 사용된 CRT의 평균입도는 -40mesh 이었고, 고흡수성 수지는 상용품과 poly(AM-SAS-AA)를 제조하여 사용하였고, binder는 PU, EVA, LDPE, SBR, poly(2-EHA)을 사용하였다. 또한 방수재의 물성을 향상시키기 위하여 보강재로 PU film을 사용하였다. 폐타이어 분말을 이용하여 개발된 sheet type 자체보수성 방수재 중 GRT/ CE-500F/EV-600/PU film 과 GRT/GE-500F/SBR(vulcanization)/PU film 로 구성된 방수재가 기존 상용제품의 물성에 근접하였다. 또한 soft type 방수재는 GRT/GE-500F/Poly(2-EHA)와 GRT/P(AM-SAS-AA)/Poly(2-EHA)로 구성된 방수재가 상용제품의 흡수능보다 4-20배의 개선된 결과를 나타내었다.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.753-761
• /
• 2024

Introduction: In this study, TLD 600 and TLD 700 pairs were used to measure the neutron dose of Elekta Precise medical linac. To this end, the optimum moderate thickness for the conversion of fast to thermal neutrons were evaluated. Materials and methods: ²⁴¹Am-Be and ²⁵²Cf sources were simulated to calculate the optimum thicknesses of the moderator for the conversion of maximum fast neutrons (FN) into thermal neutrons (TN). Pair TLDs were used to measure F&TN doses for three different field sizes at four depths of the medical linac. Results: The maximum thickness of the moderator was optimized at 6 cm. The measurement results demonstrated that the TN dose increased with the expansion of field size and depth. The FN dose, which was converted TN, exhibits behaviors comparable to the TN due to its nature. Conclusion: This study presents the optimum thickness for the moderator to convert FN into TN and measure F&TN using TLDs.

• 대한전자공학회논문지SD
• /
• 제43권2호
• /
• pp.8-12
• /
• 2006

졸-겔 법으로 $Pt/TiO-2/SiO_2/Si$ 기판 위에 ZnO 박막을 제작하여, 열처리 온도에 따른 박막의 결정화 특성 및 미세구조와 광학적 특성을 조사하였다. XRD 측정 결과로부터, 열처리 온도가 $600^{\circ}C$ 일때 가장 우수한 c-축 배향성을 나타냈으며, 이때 반가폭은 $0.4360^{\circ}C$ 이었다. AFM 으로 ZnO 박막의 표면형상과 표면 거칠기를 관찰한 결과, $600^{\circ}C$ 열처리 온도에서 입자가 고르게 성장하여 치밀한 박막이 형성되었음을 관찰할 수 있었고, 표면 거칠기도 1.048nm 로 가장 우수한 값을 나타내었다. ZnO 박막의 열처리 온도에 따른 PL 특성을 조사한 결과, $600^{\circ}C$로 열처리된 ZnO 박막에서 자외선 영역의 발광 피크 (378nm)는 가장 크게 가시광 영역의 발광 피크 (510nm)는 가장 작게 관찰되었다. 가시광 영역의 발광 피크가 작은 것은 산소 공공 또는 불순물이 매우 적다는 것을 의미하므로, $600^{\circ}C$로 열처리된 ZnO 박막은 비교적 화학양론적으로 성장되었음을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1495-1498
• /
• 2008

$TiO_2$ nanopowders were synthesized by new sol-gel combustion hybrid method using acetylene black as a fuel. The dried gels exhibited autocatalytic combustion behaviour. $TiO_2$ nanopowders with an anatase structure and a narrow size distribution were obtained at 400-600 ${^{\circ}C}$. Their crystal structures were examined by powder Xray diffraction (XRD) and their morphology and crystal size were investigated by scanning electron microscopy (SEM). The crystal size of the nanopowders was found to be in the range of 15-20 nm. $TiO_2$ powders synthesized at 500 ${^{\circ}C}$ and 600 ${^{\circ}C}$ were applied to a dye solar cell. An efficiency of 5.2% for the conversion of solar energy to electricity ($J_{sc}$ = 11.79 mA/$cm^2$, $V_{oc}$ = 0.73 V, and FF = 0.58) was obtained for an AM 1.5 irradiation (100 mW/$cm^2$) using the $TiO_2$ nanopowder synthesized by the sol-gel combustion hybrid method at 500 ${^{\circ}C}$.

• Applied Microscopy
• /
• 제48권4호
• /
• pp.117-121
• /
• 2018

The multiple length scale analysis of previously designed Fe-Mn-Al-C based low-density model alloys reveals the difference in ordered ${\kappa}-carbide$, $(Fe,Mn)_3AlC_x$, between Fe-25Mn-16Al-5.2C (at%) alloy and Fe-3Mn-10Al-1.2C (at%) alloy. For the former alloy composition consisting of fully austenite grains, ${\kappa}-carbide$ showed majorly cuboidal and minorly pancake morphology and its chemical composition was not changed through aging for 24 h and 168 h at $600^{\circ}C$. Meanwhile, for the isothermally annealed ferritic alloy system for 1 hr at 500 and $600^{\circ}C$, the dramatic change in the chemical composition of needle-shape ${\kappa}-carbide$, $(Fe,Mn)_3(Fe,Al)C_x$, was found. Here we address that the compositional fluctuations in the vicinity of the carbides are significantly controlled by abutting phase, either austenite or ferrite. Namely, the cooperative ordering of carbon and Al is an important factor contributing to carbide formation in the high-Mn and high-Al alloyed austenitic steel, while the carbon and Mn for the low-Mn and high Al alloyed ferritic steel.