Resources Recycling (자원리싸이클링)

The Korean Institute of Resources Recycling (한국자원리싸이클링학회)
권호 표지

Development of self-sealing waterproof materials using GRT powder

폐타이어 분말을 이용한 자체보수성 방수재 개발

  • Lee Dong-Min (Department of Chemical Engineering, Kwangwoon University) ;
  • Choi Joong-So (Department of Chemical Engineering, Kwangwoon University)
  • 이동민 (광운대학교 공과대학 화학공학과) ;
  • 최중소 (광운대학교 공과대학 화학공학과)
  • Published : 2005.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Four sheet-shaped and one soft-shaped self-sealing waterproof materials were prepared to recycle some GRT(Ground Rubber Tires). Their physical properties were tested to consider characteristics of them. The self-sealing waterproof materials were consisted of GRT/super absorbent polymer(SAP)/binder and mold by a hot press after mixing with a batch-typed internal mixer. The average size of GRT particles was -40 mesh, SAPs were commercial GE-500F and poly(AM-SAS-AA) prepared in this work. Binders were PU. EVA, LDPE, SBR, and poly(2-EHA). And PU film was attached to improve the properties of waterproof materials. Characteristics of self-sealing waterproof materials consisted of by GRT/GE-500F/EV-600/PU film and GRT/GE-500F/SBR(vulcanization)/PU film among the developed self-sealing waterproof materials were similar to the commercial products. And properties of the soft-shaped self-sealing waterproof materials consisted of by GRT/GE-500F/Po1y(2-EHA) and CRT/Poly(AM-SAS-AA)/poly(2-EHA) were improved within from four times to twenty times compared to the one oi the commercial products.

폐타이어 분말(GRT)을 재활용하기 위하여 sheet type 4그룹과 soft type 1그룹의 자체보수성 방수재를 제조하였다. 각각 방수재의 방수특성을 고찰하기 위하여 방수재들의 물성을 측정하였다. 방수재는 GRT/ 고흡수성수지/ binder로 구성되었으며, internal mixer로 혼합한 후 hot press로 성형하여 제조 되었다. 방수재 제조에 사용된 CRT의 평균입도는 -40mesh 이었고, 고흡수성 수지는 상용품과 poly(AM-SAS-AA)를 제조하여 사용하였고, binder는 PU, EVA, LDPE, SBR, poly(2-EHA)을 사용하였다. 또한 방수재의 물성을 향상시키기 위하여 보강재로 PU film을 사용하였다. 폐타이어 분말을 이용하여 개발된 sheet type 자체보수성 방수재 중 GRT/ CE-500F/EV-600/PU film 과 GRT/GE-500F/SBR(vulcanization)/PU film 로 구성된 방수재가 기존 상용제품의 물성에 근접하였다. 또한 soft type 방수재는 GRT/GE-500F/Poly(2-EHA)와 GRT/P(AM-SAS-AA)/Poly(2-EHA)로 구성된 방수재가 상용제품의 흡수능보다 4-20배의 개선된 결과를 나타내었다.

Keywords

References

  1. Park, J. L., Cho, C. H. and Lee, S. K., 1996: A Study on the GRT/HDPE Composite for Reuse of Waste Tire(I), J, Korea Solid Wastes Engineering Society, 13(6), pp.699
  2. 이정수, 이종민, 김상돈, 1995: 유동층 반응기를 이용한 폐타이어의 처리 기술, Chemical Industry and Technology, 13(1), pp.44
  3. 김진국, 1993: 폐타이어 재활용 기술, 고무학회지, 28(3), pp.205
  4. Hong, Y. K. and Chung, K. H., 1995: Maximization on Recycling of Waste- Tires, J. of Korean Ind. & Eng. Chem., 6, pp.1
  5. 김진국, 1997: 폐타이어 개질 고무 아스팔트, 고분자 과학과 기술, 8(6), pp.754
  6. Jeong, O. K., Kang, T. B. and Lee, H. K., 2000: Acoustic Absorption in Re-cycled Rubber Granulate, Applied Chemistry, 4, pp.205
  7. Kim, Y. W. and Kim, J. O., 1987: A Study on Reutilization of Waste Tires by Pyrolysis facilities, J, Korea Solid Wastes Engineering Society, 4(2), pp.105
  8. Um, J. G., Chung, K. H., Hong, Y. K. and Choo, K., 1998: Study on an Elastic and Permeable Pavement using Scrap Tire, Elastomer, 33(4), pp.290
  9. Kim, J. M., Cho, S. D., Lee, Y. S. and Park, Y. S., 2004: Research of the Re-use of Scrap Tires as a Backfill Material for Retaining Wall, J, Korea Society of Waste Management, 21(2), pp.117
  10. Kim, S. W., 1999: Formation of Gasified Products and Polycyclic Aromatic Hydrocarbons from Field-scale Pyrolysis Incinerator for Waste Tires, J, Korea Solid Wastes Engineering Society, 16(3), pp.305
  11. Lee, K. Y., Kim, K. S., Moon, Y. U. and Shin, J. S., 1995: Synthesis and Characterizations of Polyacrylic Super-absorbent Polymer by Inverse Suspension Polymerization, J. of Korean Ind. & Eng. Chem., 6(6), pp. 1181
  12. Shin, Y. S., Woo, J. W., Park, S. S. and Choi, J. S., 2002: Oil-absorption and Thermodynamic Analysis of Poly(laurylacrylate) Polymer, HWAHAK KONGHAK, 40(1), pp.82
  13. Shin, Y. S., Chen, S. W., Park, S. S. and Choi, J. S., 2002: A Study on Preparation and Characteristics of Acrylic Superabsorbent Polymers for Magnetic Beam Gate, HWAHAK KONGHAK, 40(5), pp.596
  14. KSM 6518, 1996: '가황 고무 물리 시험 방법', 국립기술품질원
  15. Cho, H. N. and Kim, J. K., 1996: Effect of the Curing Conditions on the Recycling of the Scrap Waste Tire, Journal of the Korea Institute of Rubber industry, 31(2), pp.95
  16. KSM 3736, 1998: '수 팽창성 벤토나이트 방수 시트', 국립기술품질원
  17. Kim, J. H., Lee, J. H. and Yoon, S. W., 2002: Preparation and Swelling Behavior of Biodegradable Superabsorbent Gels Based on Polyaspartic Acid J. Ind. Eng. Chem., 8(2), pp.138 https://doi.org/10.1021/i500002a014