• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1307-1308
• /
• 2008

본 연구에서는 이전에 제안한 stripe형으로 제작된 경사형 대향유지전극구조의 마진 개선과 오방전 감소를 위하여 폐쇄형으로 제작된 경사형 대향유지전극구조를 제안하였다. 제안된 구조는 상판의 유지전극들을 페쇄형으로 패터닝된 유전체층 사이에 Ag 전극을 경사형으로 형성하여 만든 구조이다. 테스트 패널은 250${\mu}m$ 유지전극 간격들을 가지는 제안된 구조와 기존의 유지전극 간격 60${\mu}m$의 ITO 구조를 reference로 하여 제작하였다. 폐쇄형 구조를 reference를 기준으로 이전의 stripe형과 비교했을때 전류가 50${\sim}$64% 증가하여 효율이 18% 감소하였지만 마진이 25V 증가하였고 휘도가 최대 44% 증가하였다. 패쇄형 구조가 stripe형 구조에 비해 효율이 감소하였지만 기존의 면방전형 구조에 비해 최대 146%의 효율 증가를 보였으며 동일전압에서 stripe 구조에 비해 높은 휘도와 넓어진 마진을 가졌다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.164-171
• /
• 2006

The results of an experimental investigation into the breakdown characteristics of a model power line in the presence of oil flame are reported under the application of 60[Hz] ac and dc high-voltages. It is appeared that flame can reduce by more than half, 80[%] in maximum, the breakdown voltage with the case of h=0 under ac and dc applications. Taking a horizontal model line with a k=0.5 of flame position, it can be seen from the results that the reduction of flashover levels, in comparison with the no-flame case, are 78.6[%] for h=0[cm], 59.7[%] for h=3[cm], 46.9[%] for h=6[cm], 41.5[%] for h=9[cm] and 35.4[%] for h=12[cm] when ac voltage is applied.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.415-415
• /
• 2006

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.4
• /
• pp.1-8
• /
• 2001

In this paper, a hybrid mass damper using AC-servomotor was designed and developed in order to reduce vibration levels of a 5-story test structure under base excitation. Control performances of the HMD under random and earthquakes excitations are compared with those of TMD through experimental test. It is confirmed that the HMD is more effective to reduce the vibration levels of the test structure especially for the earthquake excitation which excites more than 2 vibration modes of the structure simultaneously.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.326-330
• /
• 2001

The characteristics of used wine yeast strains were as follows, S6U showed low fermentation speed than those of other yeast strains, but this strain fermented completely later. The wine fermented by W-3 was very low contents of total acid, 0.75% and the ones fermented by UCD530 and AC- contained much extract, 3.26 mg/L and 3.22 mg/L respectively. The wine fermented by CEG and CS2 were predominant in yellowness, and EC1118 produced large amount of acetaldehyde, 49.9 mg/L than those of other strains. EC1118 and CY3079 displayed low methylene blue dyeing ratio, below 15%, meaning high alcohol tolerance yeast. UCD530 produced extremely high contents of glycerol, succinate and lactate compared with other strains. These properties revealed that UCD530 was a typical Saccharomyces bayanus species. The main organic acids produced by wine yeasts were pyruvate, lactate, succinate and acetate. The concentration of acetate in experimental wine could be divided into two parts, one group had concentration below 170 mg/L (UCD530, EC1118, AC-, CY3079, W-3), and the other had concentration up to 350 mg/L (S6U, CEG, CS2).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.336-342
• /
• 2003

In this paper, a new differential detector is introduced, in which a solar cell is used to reduce the low frequency interference from environmental optical noise. The solar cell also supplies electrical power to the detector circuit using the optical noise power. The DC voltage from the solar cell is used as a power supply to the detector, and the AC voltage is used to reduce the optical noise in a photodiode with the differential detection method. The signal to noise ratio was improved by about 20 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.3
• /
• pp.130-134
• /
• 1985

In two-dimensional discrete cosine transform(DCT) coding, the measurements of the distributions of the transform coefficients are important because a better approximation yields a smaller mean square distorition. This paper presents the results of distribution tests which indicate that the statistics of the AC coefficients are well approximated to a generalized Gaussian distribution whose shape parameter is 0.6. Furthermore, from a simulation of the DCT coding, it was shown that the above approximation yields a higher experimental SNR and a better agreement between theory and simulation than the Gaussian or Laplacian assumptions.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.6
• /
• pp.590-599
• /
• 2005

Object : Cigarette smoking is a major cause of mucus hypersecretion, which is a pathophysiological feature of many inflammatory airway diseases. Mucins, which are an important part of the airway mucus, are synthesized from the Muc gene in airway epithelial cells. However, the signaling pathways for cigarette smoke-induced mucin synthesis are unknown. The aim of this study was to determine the signal pathway for smoking induced Muc5ac gene expression. Methods : A549 cells were cultured and transiently transfected with the Muc5ac promoter fragment. These cells were stimulated with 5% cigarette smoke extract (CSE) alone or with CSE after a pretreatment with various signal transduction pathway inhibitors (AG1478, PD98059 and SB203580). The Muc5ac promoter activity was examined using the luciferase reporter system, and the level of phosphorylated EGFR, ERK1/2, p38 MAPK and JNK were all examined using Western blot analysis. Muc5ac mRNA expression was also examined using reverse transcriptase polymerase chain reactions (RT-PCR). Results : 1. The peak level of luciferase activity of the Muc5ac promoter was observed at 5% concentration and after 3 hours of incubation with the CSE. The level of EGFR phosphorylation and the luciferase activity of the transfected cells caused by the CSE were significantly suppressed by AG1478 or PD98059 (P<0.01). 2. CSE phosphorylated ERK1/2 or p38 MAPK but not JNK. The Muc5ac mRNA expression level was increased by the CSE but that was suppressed by PD98059 or AG1478. 3. The CSE-induced phosphorylation of ERK1/2 was blocked by PD98059 and that of p38 MAPK was blocked by either PD98059 or SB203580. Either PD98059 or SB203580 suppressed the luciferase activity of the transfected cells (P<0.0001). Conclusion : The Muc5ac mRNA expression level was increased by the CSE. The increased CSE-induced transcriptional activity was mediated via EGF receptor activation, which led to ERK1/2 and p38 MAPK phosphorylation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.13-18
• /
• 2005

The variation of discharge characteristics of an ac PDP was observed with the charge of scan electrode driving circuit. Conventional scan electrode driving circuit provides two switches per one scan line, and the suggested one can be constituted by one switch per one scan line with the consideration of capacitive load characteristic of an ac PDP. To verify the workability of the suggested scheme, the performances of the ac PDP was investigated. The dynamic voltage margin was slightly decreased with the adoption of the suggested scheme, which is estimated to result from the misfiring of unselected discharge cells due to the deformation of voltage level of the neighboring scan electrode. In the observation of the delay characteristics of addressing discharge, the performances of the conventional circuit and the suggested one are assumed to be equivalent.

• Journal of Korea Multimedia Society
• /
• v.1 no.2
• /
• pp.194-203
• /
• 1998

In this paper, a new DCT-VQ method is proposed which can solve the problems of VQ such as the degradation of edge and enormous calculations. VQ is carried in DCT domain but spatial domain in order to protect the degradation of edge. DCT makes high correlated image data decorrelated and the energy concentrated on a few coefficients. In DCT domain, the DC coefficient is quantized with 8 bits uniform scalar quantizer and the AC coefficients are divided to three regions and coded with vector qiantizer for considering edge components. For the decrease of the calculation and memory, the vectors for three region have small dimension of $1{\times}7$ and use the same codebook. Thus, the proposed method can fully express the edge components by considering AC coefficients in DCT domain and decrease the calculation and memory be reducing the dimension of vectors.