• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1111-1116
• /
• 2005

The necessity of the home network have been enlarged gradually according to the distribution of ultra-high speed internet, the expansion of a digital information equipment and the change of a life pattern. In this paper, we proposed the embedded ethernet module that could be operate on eight bit system, but it could control home appliance with full ethernet speed. The embedded ethernet module consists of 8051 MCU and Hardware TCP/IP. In this module, we construct simple web server and port remote control program for I/O device control. We verified through internet that the developed embedded ethernet module could control and check home appliances anywhere and anytime. We expect the developed ethernet module can build up niche market at home network. And it will be helpful to activate home network market.

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4422-4430
• /
• 2022

Studying the effects of gamma radiation on the instrumentation and control (I&C) system of a nuclear power plant is critical to the successful and reliable operation of the plant. In the accidental scenario, the adverse environment of ionizing radiation affects the performance of the I&C system and it leads to inaccurate and incomprehensible results. This paper reports the effects of gamma radiation on the AT89C51RD2, a commercial-off-the-shelf 8-bit high-performance flash microcontroller. The microcontroller, selected for the device under test for this study is used in the remote terminal unit for a nuclear power plant. The custom circuits were made to test the microcontroller under different gamma doses using a ⁶⁰Co gamma source in both ex-situ and in-situ modes. The device was exposed to a maximum dose of 1.5 kGy. Under this hostile environment, the performance of the microcontroller was studied in terms of device current and voltage changes. It was observed that the microcontroller device can operate up to a total absorbed dose of approximately 0.6 kGy without any failure or degradation in its performance.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.445-447
• /
• 2008

The CCTV systems is the most extensively used for a burglar proof, a crime prevention and a Prevention forest fires etc. The CCTV systems which is used in present is a PAN/TILT form. We want to control of CCTV systems motion by Up/Down, Left/Right, Zoom In/Out, Focus, TELE. We design a 8051 microcontroller board and a Key Controller and a Relay Controller. We conformed its feasibility through the simulation.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.3
• /
• pp.27-33
• /
• 1993

This paper presents the &tal controller for driving high frequency voltage fed PWM inverter that carrier frequency is over 2OkHz.We analyzed the conventional PWM to select a proper PWM pattern. as the result, obtained PWM pattern of the controller in which asynchronus staircase sinusoidal waveform is used as reference signal, and variable carrier ratio method was used for PWM control. The PWM controller is designed by fully digital method. Especially, Thk proposed controller is consisted of 8 bit one-chip microprocessor and digital logic. the former is for arithmetic and data processing, and the latter is for PWM pattern synthesis. Therefore, The responsibility and controllability is improved. Also, Data processing capability is improved using proper program to output modulation index with 9 bits. Circuits configuration of digital controller are made up of one chip 8051 and EPLD, and its controllability is tested by operating voltage fed inverter. Harmonics and current waveform is evaluated and analyzed for the voltage fed inverter system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.41-50
• /
• 2006

This paper presents a novel ultrasonic sensor system to overcome limited distance detection range that can be measured only more than 30cm by single ultrasonic transducer. This is accomplished by separation of receiving capacitive ultrasonic transducer from transmitting capacitive ultrasonic transducer. And hardwares and software of the system are described in detail. The system makes very close range as well as long range detect by wireless precisely. Frequency of trigger pulse is 10Hz, but it is very low frequency for transmitting data in wireless module. Therefore, for triggering between receiver and transmitter, an algorithm for mixing and distinguishing trigger pulse from carrier pulse by software is proposed. The system is designed by common microprocessor 8051. The performance of the proposed method has been assessed through two types. The first, transmitting and receiving transducer are put on both sides. And then, distance of two point is measured as far as 0mm. Secondly, transmitting transducer send out ultrasonic pulse and measure the time of flight(TOF) until a first echo from an object detected by the detached receiving transducer. The distance between the detached transducers and a reflecting object is measured as far as 7cm. Images of measured ultrasonic waves and TOF for two methods presented to prove effectiveness of results.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.91-99
• /
• 2008

In this paper, we implemented an wireless remote control and monitoring system by using Globalstar satellite modem. This system is composed of the data terminal equipment of Globalstar data communication system using microcontroller, C8051F023, and WGIS(Web-based GIS) user program. We tested the wireless remote control and monitoring system with data terminal equipment and user program how to work properly, and verified that the user could confirm the data from the data terminal equipment, which can provide the status of input/output devices and the information of location with the main and control dialog by GIS(Geographic Information System) program. For data communication of between data terminal equipment and user program, we programed PPP and TCP/IP protocol to communicate with each other. Some GIS tools used in this program are ArcView and MapObject from ESRI to offer various visual mapping information to the user.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.749-756
• /
• 2015

In this paper, we propose a unique systolic structure and communication algorithm that maintains a solid link between nodes using synchronous digital communication and enables low power communication. This system was designed by using CC2500 RF transceiver, CC2590 RF front end and C8051F330 low power microcontroller. The measurement of power consumption in the network link shows below $400{\mu}W$ in data transfer rate 320bps. The system constitutes the base unit of low power wireless network that was composed of each seven link nodes having eight sensor nodes. Results of the experiments show that link nodes using a 4Ah battery could operate over 3 years without replacement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.364-370
• /
• 2002

A banknote counter is a machine that automates counting the money in some agencies to treat much banknotes as well as general banking agencies. The banknote counter materialized in this paper is the machine that adds the function of banknote sorting, detecting plural banknote and detecting counterfeit banknote to an existing banknote counter. The technique of sensor signal processing are used for banknote sorting. The technique of sensor application and data processing are used for detecting counterfeit banknote. The technique of precision equipment design and microprocessor application are used for high speed count. Software improved in debugging and difficulties to link with additional hardware. It was materialized through effective control algorithm and real-time signal processing with C-language on the basis of RTOS(real-time operating system) Photodiode, its applications and a magnetic resistance sensor are used as a sensor device with regard to hardware cost -cutting and process velocity. PCF80C552-24 of Philips using Intel I8051 core is used as a control microprocessor. As the results so far achieved, counterfeit banknotes made by the use of a color duplicator and a color Printer, are distinguished from real banknotes through mixing an optical with a magnetic sensor. and, in case that there are some different banknotes while counting, it is prevented for them to be counted without discriminating from the same kind of banknotes in addition to the fu notion of banknote sorting.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.47-53
• /
• 2002

This paper manufacturing one system and use this separatively, plan, and embody system that apply integration design method in research about characteristic of internal core of 8051 micro-processors and system reusability so that can use as module of other system. The proposed system itself by object style so that reusability may be possible in proposed method and object style for connection between this systems is required. Set on these request and when systems have own information and were linked with other systems, by supplying own information automatic movement itself is realized and system itself embodies ashes so that can be applied to other system. The proposed method in this paper analyzes and compares with existent Z-80 education board, as well as system that propose offers extensibility, it handles most function to software and development period, expense and baud dimension confirmed advantage of and so on that reduce. Also, design for object style system architecture and showed feature that extensibility and portability are augmented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.954-963
• /
• 2007

As RFID systems are applied to various fields and applications such as supply chain management, asset management, location based applications etc. the requirements becomes diverse. For example, Much higher performance, TCP/IP protocol stack are required in some applications. However, low end processors based systems such as 8051 processor can not meet such requirements due to their low processing capacity and limited size of memory. In this paper a UHF band RFID system which meets the EPC Class-1 Generation-2 specification with ARM920T-based processor is implemented and tested.